7.62x39

[Reloader762]

Should add, I was using A1680 to push 123gr Hornady SP's. Had a box of factory Hornady 123gr SST's and honestly couldn't tell the difference between the two.

When I saw the first pic I figured that was the powder you were using. I started out with AA1680 in the X 39 an had excellent results with it but anything made by Accurate became hard to find in this area back during the last powder primer shortage so I switched over to Reloader #7 got the same results an never looked back and it's more versatile in lots of other cast rifle loads as well.

Here is one of my old test load targets from my load workup days many years ago.

[CodySPowell]

When I saw the first pic I figured that was the powder you were using. I started out with AA1680 in the X 39 an had excellent results with it but anything made by Accurate became hard to find in this area back during the last powder primer shortage so I switched over to Reloader #7 got the same results an never looked back and it's more versatile in lots of other cast rifle loads as well.

Here is one of my old test load targets from my load workup days many years ago.

Very nice! I started at 25.5gns with zero signs of pressure. Need to load up some more and take my chronograph with.

Sent from my SM-J727V using Tapatalk