Nufinish in vibratory tumbler

[Ian]

Just wondering how to add the nufinish. Should I dump some in and run it for a while and then add brass? Or do I need to him out the polish first?

[EUDE75]

Put some in and let it run and disperse before you add the brass or it'll cake up on some of the brass. Also add just a little mineral spirits to it. It helps with cutting the dust down.

Sent from my XT1650 using Tapatalk

[EUDE75]

Now that's with corn cob media. Walnut media will become a red past from the dust

Sent from my XT1650 using Tapatalk

[Travis Warren]

I add maybe half a capful of NuFinish and let tumble empty for 10-15 minutes. Works great and prevents any tarnishing while prepped cases are stored.

Sent from my Moto Z (2) using Tapatalk

[Ian]

Thanks guys. I let it run with just the polish for 10 to 15 minutes and it mixed right in. Now to see how the brass comes out.

[EUDE75]

It should be nice and shiny.

Sent from my XT1650 using Tapatalk

[handcannon]

Just wondering how to add the nufinish. Should I dump some in and run it for a while and then add brass? Or do I need to him out the polish first?

I put a cap full. Let it run about 1 min add brass.

[Ian]

I only had a chance to run it 45 min but the cases already looked shiner than they ever have been. Not that they need to be shiny to function.

[Jakebert2001]

I only had a chance to run it 45 min but the cases already looked shiner than they ever have been. Not that they need to be shiny to function.

I’ve let mine go for a full 24 hours (forgot about it). Didn’t hurt a thing. Nice and shiny.


Sent from my iPhone using Tapatalk

[ReneeMicelli]

I’ve let mine go for a full 24 hours (forgot about it). Didn’t hurt a thing. Nice and shiny.


Sent from my iPhone using Tapatalk

Gotta watch out when you do that. They shine so brightly they might blind someone.