Plating on X-treame bullets

[Wm Dunn]

Xtreme are very good bullets but I have found that if I lightly chamfer the mouth that I can load with very little bell and a very light crimp of bullet size + case dimension to get a much more accurate round. I use about 1/4 turn on a lee taper crimp which leaves no marks on the bullets.

[CodySPowell]

Xtreme are very good bullets but I have found that if I lightly chamfer the mouth that I can load with very little bell and a very light crimp of bullet size + case dimension to get a much more accurate round. I use about 1/4 turn on a lee taper crimp which leaves no marks on the bullets.

Exactly! I put just enough flair on my 9mm so the bullet just barely grabs the brass. Then a very light taper crimp.

Sent from my SM-J727V using Tapatalk