Quote Originally Posted by JeffreyDeGraff View Post
Got the starline creedmoor brass sized and primed. I was impressed, except for a few pieces, all of the brass was +/- .001” of the book trim length, and all of it was was within .001” to the datum on the shoulder.

I started on my 243 brass and ran into a situation. My Hornady dies would not size the brass enough to where the bolt would close with minimal resistance. I remembered I had bought a set of lee dies, from jbotto here on the forum, so I dug those out and bam, it was perfect. I got 10 pieces done before bed, and hoping to get the rest finished today.

After 243 comes 338-06.


JTD
I have been reloading 243 for nearly 5 decades and had never had this problem until last year reloading for a Howa 1500 that my wife shoots. I just couldn't get the dies to resize quite enough to close the bolt cleanly. Unfortunately mine were Redding dies of which I am a big fan, got out a set of RCBS that I had and everything is ok. Just seems weird that you ran into the same issue.