Crimping for an AR15?

[BradyT88]

My .2 cents. I crimp everything especially semi auto rifle. The last thing I want is bullet setback and a blown up gun.

Sent from my SM-J727V using Tapatalk

That has been my thoughts as well, but it seems like there is a lot of debate on whether even a light crimp ring in the bullet causes enough deformation to mess with the trajectory down range. May not be noticeable at 100 yards per se, but likely at greater distances. I'd like to try stretching this BLK out to 500 yards at least and the 223 out to 1000 yards.

[CodySPowell]

That has been my thoughts as well, but it seems like there is a lot of debate on whether even a light crimp ring in the bullet causes enough deformation to mess with the trajectory down range. May not be noticeable at 100 yards per se, but likely at greater distances. I'd like to try stretching this BLK out to 500 yards at least and the 223 out to 1000 yards.

I'd try it both ways. I did a bunch of testing with .223. Crimp and no crimp. The velocities were slightly more consistent on the crimped loads. The guys that anneal say that solves consistent neck tension, but won't necessarily prevent setback. I crimp everything because that's what I was taught. Piece of mind.

Sent from my SM-J727V using Tapatalk