QuickLOAD users

[BradyT88]

Yikes, yeah I hadn't thought of that. These rifle pressure revolver magnums rounds kinda have a reputation for being hard on top straps to begin with...a light bullet isn't going to help with that.

I suppose shooting 2 or 3 just to see how they perform won't hurt but after that I'll stick to heavy stuff.

Sent from my SM-G965U using Tapatalk

[Jay Andrew]

I've got another odd one for you... I picked up some solid copper 185 gr bullets meant for a 50 GI, but I want to load them in my 500 Auto and possibly my 500 S&W revolver. I put a few of them on my scale and they actually weighed 180.0 gr +/- 0.1.

Cartridge: 500 S&W
Weight: 180gr
COAL: 1.975"
Bullet Length: 0.601"
Bullet Diameter: 0.500"
Barrel Length: 18" for the AR10 and 6.5" for the Revolver
60805333_337033463652000_3408641906173804544_n.jpg

61064114_326833724665504_8174159020190334976_n.jpg

61375703_2287857781267494_7716502530787639296_n.jpg

180gr 500 Magnum 18 Barrel.JPG

Some screaming velocities on that. Just a warning, it'll over expand and blow the petals off within the first few inches on the target, the remaining slug will penetrate a long ways.

180gr 500 Magnum 6.5 Barrel.JPG

[BradyT88]

180gr 500 Magnum 18 Barrel.JPG

Some screaming velocities on that. Just a warning, it'll over expand and blow the petals off within the first few inches on the target, the remaining slug will penetrate a long ways.

	12/23/2019
Enforcer	45.5	45.5	46.5	46.5	47	47	47.5	48	48.5	49	49.5	50	50.5
180gr	GI	GI	GI	GI	GI	GI	GI	GI	GI	GI	GI	GI	GI
	LabRadar	100yd	LabRadar	100yd	LabRadar	100yd	Caldwell	Caldwell	Caldwell	Caldwell	Caldwell	Caldwell	Caldwell
3	E		E		E		2302	2421	2408	2428	2413	2499	2482
2	E		2240	1402	E		2278	2397	2395	2446	2396	2440	2513
1	E		2336	E	2334	E	2407	2411	2480	2481	2478	2510	2533
AVG	#DIV/0!		2288.00		2334.00		2329.00	2409.67	2427.67	2451.67	2429.00	2483.00	2509.33

There's my results with Enforcer and those 180/5 gr bullets. 2509 fps average is a bit short of the 2900 fps predicted. There were no pressure signs though so I may try again, and creep higher. But I may wait til a hot summer day rather than the cold (although warm for winter) 40 degrees I shot these in. The Enforcer is extremely dirty though. I may try #9 or Power Pistol next.

[themazmanmechanic]

Is your offer to run quickload still standing?


Sent from my iPhone using Tapatalk

[Jay Andrew]

Yes sir, whatcha got?


Sent from my iPhone using Tapatalk

[themazmanmechanic]

I have a 458 american 2”. Basicly its 450 marlin shortened .100. Capacity is 69gr. I am shooting a 500 gr projectile that is 1.4” long at an oal of 2.8. Barrel length is 26”


Sent from my iPhone using Tapatalk

[Jay Andrew]

I have a 458 american 2”. Basicly its 450 marlin shortened .100. Capacity is 69gr. I am shooting a 500 gr projectile that is 1.4” long at an oal of 2.8. Barrel length is 26”


Sent from my iPhone using Tapatalk

QuickLOAD has this wildcat on file. Always amazing me what they have...

On the capacity did you measure that with H20? It's close to what QuickLOAD has on record (73.00gr) since case capacity is a sensitive metric, I just wanted to check before I over ride the value.

You wouldn't happen to have the make and model of the bullet? I just get the warm and fuzzies if I can use a bullet on file rather then altering an existing.

Whats your barrel length?

[themazmanmechanic]

I got the case capacity from the cartridge drawing, if they have it on file just use what they have, who am i to tell them anything? Hornady round nose interbond. 26” barrel


Sent from my iPhone using Tapatalk

[Jay Andrew]

Gotcha, no problem

458 American 2in w-Hornady 500gr Interlock.JPG

[themazmanmechanic]

This data is fantastic! Thank you greatly. Do you have time to run the 300 gr barnes tsx at 2.75”


Sent from my iPhone using Tapatalk