Download our Android App!
Sage's Android App
Download our Apple App!
Sage's Apple App

Donate to Sages

Results 1 to 8 of 8

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Title
    Junior Member
    Join Date
    Nov 2020
    Posts
    6

    Rem 700 300 Win Mag

    Hello all... I have a new, well less than 40 rounds through it by me, rifle that I am having an issue with. Shooting factory Federal and Winchester through it and the cases get stuck so hard it's extremely difficult to get the bolt open to eject the round... to the point I have to almost get a hammer to open it, bruised palm to prove it. I can't believe that this is ok? Am I really missing something here?? I could very much use input on this! FRUSTRATED!!!

    Thank you!

    David

  2. #2
    JeffreyDeGraff's Avatar
    Title
    Premium Member
    Join Date
    Jul 2018
    Location
    North Texas
    Posts
    2,367
    You are right. That is not right. Do you have any pictures of the fired brass? Any unusual marks on them? How to the primers look? Is the bolt hard to close on these factory rounds before you fire them?


    JTD

  3. #3

    Title
    Junior Member
    Join Date
    Nov 2020
    Posts
    6
    There are definitely marks towards the base on both factory loads parallel
    to the body of the brass. Primers looks all good. They chamber very easily before being fired. I have also noticed that it does NOT like Hornady factory loads at all. Almost impossible to even chamber new round..

    Not sure how to or if its possible to upload pics for better inspection here.

  4. #4

    Title
    Junior Member
    Join Date
    Nov 2020
    Posts
    6
    Doing this from my phone... I found how to upload pics. I will do here in a moment.

  5. #5

    Title
    Junior Member
    Join Date
    Nov 2020
    Posts
    6
    Well, something on my end wont allow me to upload pics.

  6. #6
    JeffreyDeGraff's Avatar
    Title
    Premium Member
    Join Date
    Jul 2018
    Location
    North Texas
    Posts
    2,367
    That stinks. Hard to tell what’s going on without pics. Couple more questions before bed. If you chamber a new round and then take it out without firing it, is there any marks on the brass? With the Hornady ammo, if you chamber a round and remove it, is there any marks on the brass or bullet?


    JTD

  7. #7

    Title
    Junior Member
    Join Date
    Nov 2020
    Posts
    6
    I will check that as well.

  8. #8
    Maybe I missed it. What is the brand or specs of your rifle?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •