Download our Android App!
Sage's Android App
Download our Apple App!
Sage's Apple App

Donate to Sages

Results 1 to 6 of 6

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Title
    Junior Member
    Join Date
    Jan 2019
    Posts
    2

    308 muzzel velocity

    I have a 20" heavy barrel 308 shooting 168 amax using IMR 4064 at 42.9gr.What are some of the muzzel velocity's you guy's are getting with close to the same set up im just looking for a good average being I don't have my chronograph yet.

  2. #2
    Rebsix's Avatar
    Title
    Premium Member
    Join Date
    Jul 2018
    Location
    Michigan
    Posts
    36
    With my 26" barrel, and Sierra 168 HPBT with a similar load I'm getting between 2500 and 2600. With 41.5 grains of Reloder-15 I'm getting an average of 2450 fps. With 43.5 gr of RL-15 I'm getting an average of 2640 fps.

  3. #3

    Title
    Junior Member
    Join Date
    Jan 2019
    Posts
    2
    Reason being my groups at 100 are great 200 and up they just get worse I was thinking I might need to speed it up a little more to get the bullet to stabilize better further out

  4. #4
    SAWMAN's Avatar
    Title
    Premium Member
    Join Date
    Sep 2018
    Location
    Cantonment,Fla.
    Posts
    580
    Your bbls twist rate is "king" here. If it is a 1:10 your rotational velocity should be good.
    The twist rate of a bbl means a lot more than the bullets forward velocity.
    Check this with: JBM Calculations (Stability) It uses the Miller Stability Factor. You are looking for a figure between 1.300 and 2.00. --- SAWMAN
    Why just dance when you can "rock and roll".
    STONER 63A ( MK-23/XM-207 )
    XM177E2

  5. #5

    Title
    Premium Member
    Join Date
    Jul 2018
    Location
    Georgia
    Posts
    79
    Using 167 grain Lapua Scenar and 43.0 of 4064 I was at 2666 fps in my 20 inch. Your velocity should be just fine. As SAWMAN suggested, check your twist. If slower than a 1:10 you may want to consider the 150 grain area.

  6. #6
    SAWMAN's Avatar
    Title
    Premium Member
    Join Date
    Sep 2018
    Location
    Cantonment,Fla.
    Posts
    580
    What I wish they made was a .308",140'ish gr.,long sleek boat tail and ogive, poly tipped bullet. Something with about a .525-.575 B.C.
    These,coupled with a 10 twist 26" bbl would all but render the 6.5Creedmoor useless. ( Actually . . . I think it is useless anyway.) --- SAWMAN
    Why just dance when you can "rock and roll".
    STONER 63A ( MK-23/XM-207 )
    XM177E2

Similar Threads

  1. .308 M80 18" Velocity?
    By JohnB92 in forum Rifle Reloading (General)
    Replies: 1
    Last Post: 02-01-2019, 04:47 AM
  2. What’s your Ideal Velocity?
    By Jay Andrew in forum Reloading for Match/Long range
    Replies: 0
    Last Post: 10-27-2018, 10:55 AM
  3. Velocity trigger
    By CodySPowell in forum General Discussion
    Replies: 21
    Last Post: 10-27-2018, 10:26 AM
  4. Sudden velocity drop
    By Nick LD in forum General Reloading questions (Reloading 101)
    Replies: 8
    Last Post: 09-24-2018, 05:05 PM
  5. Hornady XTP Velocity Chart
    By Adam Van Camp in forum Pistol Reloading (General)
    Replies: 3
    Last Post: 09-19-2018, 04:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •