.357 SIG powder and bullets recommendations

[SouthernCoyote]

Are you using the Lee auto drum by chance. If I use it it over flares the case. Now if I don't use it I can set the flare as needed. Seems like the tension from the spring in the auto drum over flares it. Never has issues like this using the auto drum in any other pistol cartridges. Any ideas?

Sent from my SM-N910V using Tapatalk

I'm loading mine on my Dillon 550B so I don't have the Autodrum. Does it have any kind of height adjustment to allow it not to push so deep in the neck?

[Guns4545]

I'm loading mine on my Dillon 550B so I don't have the Autodrum. Does it have any kind of height adjustment to allow it not to push so deep in the neck?

If I back it way off to get the proper flare it wont drop the powder. I'm lost. May have to call Lee.

Sent from my SM-N910V using Tapatalk

[SouthernCoyote]

With the .357 SIG it doesn't need much flare. I'd call LEE and see what they recommend. Wish I could help, but I'm not familiar with the Autodrum. I use lots of LEE products and never had the first complaint, but unfortunately the Autodrum isn't one I've tried.

[Guns4545]

With the .357 SIG it doesn't need much flare. I'd call LEE and see what they recommend. Wish I could help, but I'm not familiar with the Autodrum. I use lots of LEE products and never had the first complaint, but unfortunately the Autodrum isn't one I've tried.

Thanks bud. I'll let you know what they say.

Sent from my SM-N910V using Tapatalk

[Guns4545]

Thanks bud. I'll let you know what they say.

Sent from my SM-N910V using Tapatalk

Found out that the spring is to strong for 357 Sig. So I'll have to load them using the Lee perfect powder measure. Gonna be slow unfortunately, but I'm in no hurry.

Sent from my SM-N910V using Tapatalk

[SouthernCoyote]

Could you maybe use a different spring to ease up the tension?

[Guns4545]

Could you maybe use a different spring to ease up the tension?

Yes, but trying to find a lighter spring is the issue. I'm waiting to hear back from Lee about this. For now I'll load them using the Lee perfect powder measure.

Sent from my SM-N910V using Tapatalk

[Guns4545]

Could you maybe use a different spring to ease up the tension?

Got the 124gr xtreme loaded today with AA #9. Had issues with set back using R-P cases even with heavy crimp. I decided to only use Speer cases. Zero set back with Speer cases. Not sure what is up with that. Gonna load Gold dots tomorrow using Speer nickel and long shot.

Sent from my SM-N910V using Tapatalk

[SouthernCoyote]

Never had that issue with R-P cases. We're they overflared possibly?

[Guns4545]

Never had that issue with R-P cases. We're they overflared possibly?

No I barely had any flare. They would set back about 5 thousands after chambered in the 32. Probably could use heavier crimp, but I prefer not to.

Sent from my SM-N910V using Tapatalk