What would you do??

[Mdbinkley]

Looked back at some of my first rounds I loaded and noticed they are short on the OAL. Data says min OAL is .960 but mine are measuring at .945ish. Should I pull them or shoot them? Factory rounds is .943

Sent from my SM-G930T using Tapatalk

[Wes Sage]

Depends on the load. If it was middle of the road, shoot em.
If they were up near max, I would pull them

[Mdbinkley]

Wes powder amount was just above starting grains

Sent from my SM-G930T using Tapatalk

[ReneeMicelli]

Wes powder amount was just above starting grains

Sent from my SM-G930T using Tapatalk

If you are barely above starting load then you SHOULD be fine. My judgement would be that I would shoot them but proceed cautiously, however if we are talking just a few rounds I would probably pull them.

[Mdbinkley]

Renee I'm about .1 to .2 above starting load. these where my first reloads I did but I loaded almost 500. Being new at it I missed the OAL

Sent from my SM-G930T using Tapatalk

[ReneeMicelli]

You should be fine then.

Sent from my SAMSUNG-SM-G900A using Tapatalk

[JeffreyDeGraff]

Sounds like you will be fine to me.


Sent from my iPhone using Tapatalk