Download our Android App!
Sage's Android App
Download our Apple App!
Sage's Apple App

Donate to Sages

      
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14
  1. #11
    RonW's Avatar
    Title
    Premium Member
    Join Date
    Jul 2018
    Location
    Lake Stevens Wa.
    Posts
    62
    It's an AR built on a Noreen 80% lower receiver and a Noreen upper, with a BCA 18" barrel, rifle is a known good shooter with commercial ammo.


  2. #12
    RonW's Avatar
    Title
    Premium Member
    Join Date
    Jul 2018
    Location
    Lake Stevens Wa.
    Posts
    62
    double


  3. #13

    Title
    Member
    Join Date
    May 2021
    Location
    110 miles north of Texarkana in the green hell
    Posts
    84
    Get a 9mm bulge buster or borrow a 9mm FCD and gut it so you can use it as a push through sizer . The BB is probably the best bet as the carbide inserts can be cracked if you need too much squeeze .
    A 3rd option would be a .375 cast bullet sizer die and use it as a push through sizer die . It should get you about .380 dia . Assuming we're talking about the 350 basically blown straight 223 case and not some wildcat based on a way shortened 308/×57/06' case with a nominal .473 head and rim .......I can see where getting a .400+ in the chamber might be a problem . The Lee push through bullet sizer is readily lapped up if needed . I would think a 223 case would be just a thumb pressure slip fit through one .

    I had a bunch of 45 ACP with the same issue . Stupid autos let the head swell just enough they wouldn't seat in my revolvers .
    Your new brass will settle down after a cycle or 2 and you won't need a SB die .


  4. #14
    RonW's Avatar
    Title
    Premium Member
    Join Date
    Jul 2018
    Location
    Lake Stevens Wa.
    Posts
    62
    I got a set of Lyman MSR dies...that seems to have corrected the issue, all shells will chamber now.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •