I used the Frankford seating die on two more calibers. I loaded some 257 Ackley with 117gr SST, last night. They turned out great. This morning I loaded some 7.5x55 with 178gr ELDX. I used the medium length seating stem for both the the 257 and 7.5, because I was going off of case length and desired over all length. Frankford recommends the short stem for .308, but says using the other is ok. The only issue I ran into using the medium stem on the 7.5, was having to make sure the bullet tip centered in the seating stem. Not a big issue just something to remember.

The micrometer adjustments seem to be spot on and has been very easy to adjust to my desired seating depth.


JTD