Lee APP Press

[hotshot357]

I'm thinking about getting one. If you have one, do you like it or not?

[Adam Van Camp]

I do have one. I have used it to decap a bunch of brass and to swage the primer pockets on a bunch of 556 brass. It seems to work very well so far. I have also purchased the priming system and bulge buster outs. I have not used them yet. The brass that I have deprived was 38 split, 357 mag, 44 mag, 223/556, 9mm. I have also sized some 327 Federal Mag brass.

[Andyt2]

Love mine have one of the first ones shipped. See my u-tube channel Andy79Z28 - many other videos out there with tips and tricks. I have added motorized bullet / case feeder. Really speeds things up.

[JeffreyDeGraff]

Check out the thread “ today at the bench”. There is a nice review of the app by mbaker a couple days ago.


JTD

[cynjon]

Love mine...works awesome for processing pistol brass. With the 4-tube feeder and collator, I can process around 2000 rounds per hour pretty easily. Especially if I use a little bit of Hornady One Shot and keep the case feeder assembly clean. I use it for swaging as well.

[Mbaker78]

Check out the thread “ today at the bench”. There is a nice review of the app by mbaker a couple days ago.


JTD

Hey, that’s me!

I love my APP. I mainly got it just to size bullets and deprime brass, but it’s picked up even more roles since then. I swage all of my 5.56 on it now too. Lee recently announced a roller handle, so that’s already on preorder for me because then it’ll clear my Forster seating die, so I can seat and crimp 308 on it once that comes in.

If you’re on Facebook, there are a couple groups devoted to the APP, and there’s a lot of good info there.

[Adam Van Camp]

Hey, that’s me!

I love my APP. I mainly got it just to size bullets and deprime brass, but it’s picked up even more roles since then. I swage all of my 5.56 on it now too. Lee recently announced a roller handle, so that’s already on preorder for me because then it’ll clear my Forster seating die, so I can seat and crimp 308 on it once that comes in.

If you’re on Facebook, there are a couple groups devoted to the APP, and there’s a lot of good info there.

Do you happen to have the part number for the roller handle?

[Mbaker78]

Lee part number 91629.

[Adam Van Camp]

Lee part number 91629.

Thank you. Just placed an order.

[hotshot357]

I want to thank all of you guys for your input!!! Your comments made the decision process easy. I ordered one from Titan Reloading this morning. They are selling them for $75.29. I also ordered three sizing dies (.45ACP, .357Mag. & 9MM) and the 4 tube feeder and collator. Thanks again, "be safe & have fun"!!! Sincerely hotshot357 (Steve)