Donate to Sages

Results 1 to 10 of 798

Hybrid View

Jbotto Today at the Bench..... 05-01-2020, 06:14 PM
Jbotto I’ll start with mine. After... 05-01-2020, 06:20 PM
JeffreyDeGraff Ive been spending a lot of... 05-01-2020, 06:57 PM
Jbotto Lots of variety there in your... 05-02-2020, 02:28 PM
JeffreyDeGraff I’m playing catch up from the... 05-02-2020, 02:37 PM
Flyeralan Using up the last of these... 08-15-2020, 09:33 AM
Flyeralan Well, my bench time to range... 02-28-2021, 06:24 AM
JeffreyDeGraff Ive also been working on... 05-01-2020, 07:04 PM
JeffreyDeGraff I hope some others jump in. I... 05-01-2020, 07:09 PM
JeffreyDeGraff Oh dang. Forgot to mention... 05-01-2020, 08:12 PM
Jbotto I got some time at the bench... 05-02-2020, 02:27 PM
JeffreyDeGraff Today I loaded 2 loads with... 05-02-2020, 02:35 PM
Mbaker78 Over the last few days I’ve... 05-02-2020, 04:59 PM
JeffreyDeGraff Keep us up to date in those... 05-02-2020, 06:31 PM
Jbotto I just added another 20 cases... 05-02-2020, 05:52 PM
JeffreyDeGraff I sized and primed 700 357mag... 05-02-2020, 06:33 PM
Jbotto Dang! We’re you doing these... 05-03-2020, 04:02 AM
JeffreyDeGraff Rock chucker and a hand... 05-03-2020, 05:04 AM
Jbotto That’s how I do it too except... 05-03-2020, 05:26 AM
Jbotto Was finishing up last night... 05-03-2020, 04:01 AM
JeffreyDeGraff Are you able to drift the... 05-03-2020, 06:47 PM
Jbotto Yes sir. Drilled and tapped... 05-04-2020, 05:04 PM
JeffreyDeGraff Great rifle!!! Anybody load... 05-04-2020, 05:10 PM
Jbotto Nope, I didn’t get time to do... 05-05-2020, 03:11 AM
Jbotto Yesterday afternoon I got... 05-09-2020, 07:30 AM
JeffreyDeGraff I do the same thing with my... 05-09-2020, 09:58 AM
JeffreyDeGraff I managed to load up 3 test... 05-09-2020, 07:34 AM
Jbotto Today at the Bench..... 05-15-2020, 06:25 PM
JeffreyDeGraff We are supposed to have rain... 05-15-2020, 07:26 PM
JeffreyDeGraff I managed to load a few test... 05-15-2020, 07:25 PM
JeffreyDeGraff Got some more 6.5-284 test... 05-16-2020, 05:42 AM
Jbotto Today at the Bench..... 05-16-2020, 11:51 AM
JeffreyDeGraff What load did you settle on... 05-16-2020, 12:32 PM
Jbotto Ha. Thanks for making me... 05-16-2020, 02:58 PM
JeffreyDeGraff Have you been able to get a... 05-16-2020, 03:42 PM
Jbotto Today at the Bench..... 05-16-2020, 04:03 PM
Flyeralan Not quite reloading, but my... 05-16-2020, 01:39 PM
JeffreyDeGraff Awesome!!! JTD 05-16-2020, 03:40 PM
Jbotto Awesome! Those will handle... 05-16-2020, 04:03 PM
Mbaker78 I haven’t sat down at the... 05-17-2020, 03:51 AM
Jbotto Glad to hear the guy is ok.... 05-17-2020, 05:58 AM
Mbaker78 People, as a general rule,... 05-17-2020, 06:02 AM
JeffreyDeGraff I couldn’t agree more! ... 05-17-2020, 06:13 AM
JeffreyDeGraff Today at the Bench..... 05-17-2020, 05:24 PM
JeffreyDeGraff Cleaning brass tonight.... 05-19-2020, 04:34 PM
Mbaker78 I made up a couple hundred... 05-19-2020, 05:15 PM
JeffreyDeGraff That’s one thing I have never... 05-19-2020, 06:02 PM
Mbaker78 I'm laid off right now, so I... 05-19-2020, 06:33 PM
JeffreyDeGraff You definitely have the time,... 05-19-2020, 06:53 PM
Mbaker78 I'm making the most of it.... 05-19-2020, 06:54 PM
JeffreyDeGraff Excellent. I’m glad you’re... 05-19-2020, 07:03 PM
JeffreyDeGraff Made up some 7.62x54R test... 05-21-2020, 06:45 PM
Mbaker78 Coated, sized, and gas... 05-22-2020, 05:57 PM
JeffreyDeGraff Got my 8mm Mauser test loads... 05-23-2020, 08:33 AM
JeffreyDeGraff I had an interesting day... 05-24-2020, 07:05 PM
Jbotto Sounds like a bit of... 05-27-2020, 03:29 AM
JeffreyDeGraff I got them all loaded up,... 05-27-2020, 03:51 AM
Jbotto Been doing that same thing... 05-30-2020, 09:56 AM
Mbaker78 I cast up a few hundred... 06-02-2020, 05:02 AM
JeffreyDeGraff Staying out of trouble,... 06-02-2020, 05:47 AM
JeffreyDeGraff I just got through depriming... 06-03-2020, 05:10 PM
Flyeralan Just off work a couple hours... 06-04-2020, 04:36 AM
JeffreyDeGraff I got all my brass cleaned... 06-08-2020, 07:11 AM
Mbaker78 I sized all of the bullets I... 06-08-2020, 07:24 AM
JeffreyDeGraff That lee app press seems to... 06-08-2020, 07:33 AM
Mbaker78 As is usual with Lee, it has... 06-10-2020, 03:18 AM
JeffreyDeGraff Fireformed some of the 6mm... 06-09-2020, 01:09 PM
Jbotto Made it out to shoot... 06-13-2020, 06:46 AM
Jbotto I also made an order of some... 06-13-2020, 06:47 AM
JeffreyDeGraff Keep us posted on those... 06-13-2020, 09:33 AM
Jbotto That’s a good idea about the... 06-13-2020, 02:18 PM
JeffreyDeGraff Today I was able to get my... 06-13-2020, 04:52 PM
Jbotto Redid some test loads for my... 06-13-2020, 08:24 PM
Jbotto I got those 9 pieces of... 06-14-2020, 05:12 AM
JeffreyDeGraff I got my R-P 300 savage brass... 06-14-2020, 07:03 PM
Mbaker78 I finally got out and shot... 06-16-2020, 05:20 PM
JeffreyDeGraff Great. Glad you got out. Got... 06-16-2020, 05:28 PM
Mbaker78 Not that I'm willing to share... 06-16-2020, 05:30 PM
JeffreyDeGraff Understood! JTD 06-16-2020, 05:31 PM
Mbaker78 25y would've been optimal for... 06-16-2020, 05:33 PM
JeffreyDeGraff As long as you got the data... 06-16-2020, 05:38 PM
JeffreyDeGraff I was able to size, prep, and... 06-16-2020, 05:34 PM
Mbaker78 I got my 75hr BTHP in a... 06-16-2020, 05:45 PM
JeffreyDeGraff Let us know how that 308... 06-16-2020, 05:52 PM
JeffreyDeGraff I got the rest of my 7.62... 06-20-2020, 03:50 PM
Mbaker78 Here's one I'll share, from... 06-21-2020, 09:59 AM
JeffreyDeGraff That one is definitely worth... 06-21-2020, 11:24 AM
Jbotto How is it Thursday night... 06-25-2020, 08:35 PM
JeffreyDeGraff Ive been turning necks this... 06-26-2020, 05:16 AM
Jbotto Brass prep of any kind sucks.... 06-27-2020, 05:09 AM
Mbaker78 I have so many different... 06-27-2020, 05:16 AM
Jbotto Today at the Bench..... 06-27-2020, 08:05 PM
JeffreyDeGraff IMR 4064 is temp sensitive.... 06-27-2020, 08:24 PM
Jbotto From what I read it seems... 06-28-2020, 06:17 AM
Flyeralan Finally getting back to the... 06-28-2020, 12:11 PM
JeffreyDeGraff Glad you’re back at it. Good... 06-28-2020, 12:51 PM
JeffreyDeGraff Sizing some black hills... 07-01-2020, 01:19 PM
Mbaker78 I'm back to work, so I... 07-01-2020, 01:22 PM
JeffreyDeGraff Oh nice! Glad you’re back to... 07-01-2020, 01:31 PM
Mbaker78 I don’t know how I missed the... 07-02-2020, 07:31 AM
JeffreyDeGraff That will be interesting to... 07-02-2020, 10:41 AM
Mbaker78 Turns out my old phone got... 07-03-2020, 08:52 AM
Jbotto Thanks for posting that! ... 07-04-2020, 03:40 AM
JeffreyDeGraff Good luck! Put up some pdog... 07-04-2020, 04:00 AM
Mbaker78 Here's what little data I... 07-03-2020, 08:54 AM
JeffreyDeGraff That’s still an interesting... 07-03-2020, 08:23 PM
JeffreyDeGraff Got my 6.5-284 brass trimmed... 07-03-2020, 08:25 PM
Jbotto Today at the Bench..... 07-04-2020, 10:31 AM
JeffreyDeGraff That varmageddon is supposed... 07-04-2020, 10:37 AM
Jbotto It seems that one in four or... 07-04-2020, 11:28 AM
Jbotto When they go on sale I buy a... 07-04-2020, 11:34 AM
Jbotto This morning so far I have... 07-05-2020, 06:28 AM
JeffreyDeGraff You sound like me. Always... 07-05-2020, 06:32 AM
Jbotto It just usually works that... 07-05-2020, 07:51 PM
JeffreyDeGraff First is an old 5-15x50... 07-05-2020, 08:09 PM
Jbotto Those scopes look nice on... 07-06-2020, 03:03 AM
Mbaker78 I chamfered, deburred, and... 07-05-2020, 09:18 PM
JeffreyDeGraff How do you do all of your... 07-06-2020, 02:21 AM
Mbaker78 I size the 308 on a single... 07-07-2020, 05:40 AM
JeffreyDeGraff I got 18 ppu 7x57 Bess sized... 07-06-2020, 07:52 PM
JeffreyDeGraff I use the frankford arsenal... 07-07-2020, 01:58 PM
JeffreyDeGraff Today at the Bench..... 07-11-2020, 10:53 AM
Mbaker78 I spent the better part of... 07-11-2020, 01:08 PM
JeffreyDeGraff That should be a great time! ... 07-11-2020, 01:47 PM
Jbotto No reloading for me this... 07-12-2020, 04:53 AM
JeffreyDeGraff I was able to get a few test... 07-12-2020, 05:34 AM
Flyeralan Finally getting time to load... 07-12-2020, 01:10 PM
JeffreyDeGraff Excellent! JTD 07-12-2020, 02:51 PM
Mbaker78 I didn't make it to the range... 07-12-2020, 02:48 PM
JeffreyDeGraff Today at the Bench..... 07-12-2020, 02:51 PM
Mbaker78 Nah, they’ll get shot... 07-12-2020, 04:51 PM
Flyeralan Loading up some subsonic 147... 07-19-2020, 06:44 AM
JeffreyDeGraff What powder are you using? ... 07-19-2020, 07:20 AM
Flyeralan I am using Titegroup, just... 07-19-2020, 07:40 AM
JeffreyDeGraff Awesome. Let us know how it... 07-19-2020, 07:54 AM
Flyeralan Well, I did try out the... 08-16-2020, 09:10 AM
JeffreyDeGraff Outstanding! I love it when... 08-16-2020, 09:16 AM
Flyeralan Will do, I also got my first... 07-19-2020, 01:17 PM
Mbaker78 I just swapped the loadmaster... 07-19-2020, 03:20 PM
Flyeralan Good luck with the blackout... 07-19-2020, 04:55 PM
JeffreyDeGraff I agree. Hope all goes well... 07-19-2020, 05:04 PM
Mbaker78 It should go well, she’s... 07-19-2020, 06:04 PM
JeffreyDeGraff The second one always seems... 07-19-2020, 06:07 PM
Mbaker78 She actually dislocated her... 07-19-2020, 07:17 PM
Jbotto Been busy packing and making... 07-22-2020, 09:17 AM
Jbotto ...I typed that on 7/22 ... 08-20-2020, 09:23 PM
JeffreyDeGraff Doing great. The crew and I... 07-22-2020, 10:57 AM
JeffreyDeGraff I pulled out my Hornady 243... 07-26-2020, 05:54 AM
Jbotto Today at the Bench..... 08-04-2020, 08:36 PM
JeffreyDeGraff Great find and even better... 08-05-2020, 02:26 AM
JeffreyDeGraff I finally was able to sit at... 08-09-2020, 04:03 PM
Mbaker78 I actually spent some time at... 08-09-2020, 04:19 PM
JeffreyDeGraff I agree. Felt really good. ... 08-09-2020, 04:34 PM
Mbaker78 I went out and expended some... 08-11-2020, 07:18 PM
Mbaker78 Last night I finished sizing... 08-16-2020, 10:58 AM
Mbaker78 Figured I should post my... 08-16-2020, 10:59 AM
Flyeralan Can you give a few details on... 08-16-2020, 11:24 AM
Mbaker78 18" 223 Wylde, PSA lower,... 08-17-2020, 08:35 AM
JeffreyDeGraff Very nice. JTD 08-16-2020, 12:28 PM
Jbotto No reloading done yet after... 08-17-2020, 05:59 AM
JeffreyDeGraff You will be there soon... 08-17-2020, 06:48 AM
Jbotto https://uploads.tapatalk-cdn.c... 08-18-2020, 06:41 AM
JeffreyDeGraff You’re getting there. ... 08-18-2020, 07:22 AM
Jbotto Sure am! I got more done... 08-18-2020, 07:14 PM
JeffreyDeGraff Awesome. Glad you are back at... 08-21-2020, 02:46 AM
JeffreyDeGraff I finally got to the bench... 08-21-2020, 06:39 PM
Jbotto Glad you got back to it after... 08-22-2020, 07:09 AM
JeffreyDeGraff I normally use unique in my... 08-22-2020, 07:40 PM
Jbotto Good enough reason to try and... 08-22-2020, 10:33 PM
Mbaker78 I have so many partial cans... 08-23-2020, 05:12 AM
Jbotto Today at the Bench..... 08-22-2020, 07:07 AM
Flyeralan I've got to do some of these... 08-22-2020, 07:28 AM
Jbotto Seems like I’ve heard either... 08-22-2020, 10:32 PM
JeffreyDeGraff I had a great range trip... 08-24-2020, 04:34 AM
Jbotto Glad you had a productive day... 08-24-2020, 09:51 AM
JeffreyDeGraff You’ve got 50 loaded rounds... 08-24-2020, 10:38 AM
Jbotto Thanks, yeah 50 left of the... 08-24-2020, 11:51 AM
Mbaker78 I hand or bench prime as... 08-24-2020, 01:13 PM
Jbotto I use a Lee hand primer but I... 08-24-2020, 09:33 PM
Mbaker78 I made it to the range... 08-24-2020, 10:14 AM
JeffreyDeGraff Sounds like you had a good... 08-24-2020, 10:43 AM
Mbaker78 It was only a friend and I at... 08-24-2020, 10:48 AM
Mauser I prepped, aka sized, primed... 08-24-2020, 10:55 AM
JeffreyDeGraff This evening I got my nickel... 08-26-2020, 06:58 PM
Jbotto Last night I sat down and... 08-27-2020, 06:07 AM
JeffreyDeGraff Finally got some crap done... 08-30-2020, 02:20 PM
Flyeralan Sounds like a productive... 08-30-2020, 04:01 PM
JeffreyDeGraff Today at the Bench..... 08-30-2020, 04:06 PM
Flyeralan I am trying 3.3-3.5 grains of... 08-30-2020, 05:03 PM
Flyeralan JTD, I spent a few hours at... 09-01-2020, 05:30 AM
Mbaker78 I primed all of the remaining... 08-30-2020, 04:08 PM
JeffreyDeGraff Sounds like everyone having a... 08-30-2020, 04:29 PM
JeffreyDeGraff These are some of my current... 08-30-2020, 04:47 PM
JeffreyDeGraff Awesome. That’s great... 09-01-2020, 05:32 AM
JeffreyDeGraff Today at the Bench..... 09-01-2020, 05:58 AM
Mbaker78 I’ve spent the last couple... 09-06-2020, 07:40 AM
Mbaker78 Went out with a friend... 09-14-2020, 08:54 AM
JeffreyDeGraff You’ve been busy. I’m all... 09-14-2020, 06:03 PM
Mbaker78 I'm transitioning back to... 09-14-2020, 06:05 PM
JeffreyDeGraff Reloading, definitely. ... 09-15-2020, 12:32 PM
Mbaker78 I enjoy playing video games... 09-15-2020, 01:10 PM
JeffreyDeGraff Went to the range today. Took... 09-20-2020, 04:56 PM
Jamesr160@yahoo.com 34gn hp going 2000 fps in a... 09-25-2020, 05:50 PM
JeffreyDeGraff Today at the Bench..... 09-25-2020, 05:58 PM
Jamesr160@yahoo.com Fn57 and ps90. Sent from... 09-25-2020, 06:00 PM
JeffreyDeGraff Outstanding! JTD 09-25-2020, 06:06 PM
JeffreyDeGraff After last weeks range... 09-26-2020, 05:45 AM
Jbotto Looking good! I think that... 09-26-2020, 06:37 AM
JeffreyDeGraff I find stuff, all the time,... 09-26-2020, 06:46 AM
Jbotto Today at the Bench..... 09-26-2020, 03:40 PM
Flyeralan I too am fascinated by the... 09-26-2020, 08:14 AM
JeffreyDeGraff I love the old Remington 700... 09-26-2020, 08:51 AM
Flyeralan Yep, it is a beautiful gun. I... 09-26-2020, 09:35 AM
JeffreyDeGraff Ha! Most of the guns I shoot... 09-26-2020, 10:44 AM
Flyeralan I shoot the 200gr Hornady... 09-26-2020, 12:19 PM
Mbaker78 I melted down the undersized... 09-26-2020, 12:37 PM
JeffreyDeGraff I was wondering how the... 09-26-2020, 03:19 PM
Mbaker78 It just made a huge stink and... 09-26-2020, 03:47 PM
JeffreyDeGraff I found a little more time... 09-27-2020, 07:09 AM
JeffreyDeGraff I had some free time today... 10-02-2020, 02:36 PM
JeffreyDeGraff Today at the Bench..... 10-03-2020, 02:39 PM
Jamesr160@yahoo.com Today at the other bench. ... 10-03-2020, 03:06 PM
JeffreyDeGraff Oh nice! Ive never cast my... 10-03-2020, 03:08 PM
Jbotto Been too long away from the... 10-09-2020, 08:31 AM
JeffreyDeGraff I used to use the lee... 10-10-2020, 05:36 AM
Jbotto They are quicker for me than... 10-10-2020, 06:15 AM
JeffreyDeGraff They definitely work well. I... 10-10-2020, 06:48 AM
Jbotto You can! I’ve never done it... 10-12-2020, 08:55 AM
JeffreyDeGraff I’ve been crazy busy lately,... 10-21-2020, 04:26 AM
Jbotto Same here JTD! I did end up... 10-21-2020, 06:08 AM
JeffreyDeGraff Outstanding!!! Nice doe! ... 10-21-2020, 06:46 AM
JeffreyDeGraff Finally got my 257 Roberts... 10-22-2020, 02:16 PM
Flyeralan You got a couple of fav's... 10-22-2020, 03:06 PM
JeffreyDeGraff Ive never killed anything... 10-22-2020, 03:15 PM
Flyeralan I've killed many a PA... 10-23-2020, 03:26 AM
Jbotto JTD, what are you planning on... 10-23-2020, 07:35 AM
JeffreyDeGraff I’m going to load some 95gr... 10-23-2020, 07:44 AM
Jbotto Today at the Bench..... 10-23-2020, 10:03 AM
JeffreyDeGraff Ive heard that about the... 10-24-2020, 06:54 PM
JeffreyDeGraff I got a few things done to... 10-24-2020, 06:57 PM
JeffreyDeGraff Got the starline creedmoor... 10-26-2020, 07:26 AM
Flyeralan I have been reloading 243 for... 10-26-2020, 01:45 PM
JeffreyDeGraff That is pretty interesting.... 10-26-2020, 02:42 PM
Jbotto Glad those dies are working... 10-26-2020, 07:32 AM
JeffreyDeGraff Well, my 243 brass is all... 10-31-2020, 09:12 AM
Mbaker78 I just got my M&P40 slide... 10-31-2020, 09:41 AM
JeffreyDeGraff That looks sharp! JTD 10-31-2020, 10:44 AM
Mbaker78 Thanks, I just have to try to... 11-01-2020, 10:30 AM
JeffreyDeGraff I know that feeling. Ive got... 11-01-2020, 11:00 AM
Mbaker78 I also have another test set... 11-02-2020, 01:57 PM
JeffreyDeGraff I haven’t seen the accutips... 11-02-2020, 02:20 PM
JeffreyDeGraff Today at the Bench..... 11-06-2020, 12:47 PM
Jbotto Sounds like you have... 11-07-2020, 10:31 AM
JeffreyDeGraff Finally done with all my... 11-08-2020, 08:27 PM
JeffreyDeGraff Today at the Bench..... 11-17-2020, 05:35 PM
muforester I love those flat point... 11-21-2020, 12:12 AM
JeffreyDeGraff So do I! I hope somewhere... 11-21-2020, 05:54 AM
JeffreyDeGraff My bench has been boring... 11-23-2020, 07:58 PM
Jbotto You think your bench has been... 11-23-2020, 10:26 PM
Mbaker78 My eldest son is home on... 11-24-2020, 04:59 AM
akpls Been pretty busy at my bench... 11-25-2020, 12:09 PM
JeffreyDeGraff That’s a good selection. What... 11-25-2020, 12:17 PM
akpls I had been going with 40 gr.... 11-25-2020, 12:25 PM
muforester I have some of the 39gr TNTs... 11-25-2020, 01:07 PM
JeffreyDeGraff Wow! 5 204’s. That’s... 11-28-2020, 05:10 PM
akpls Not a great photo, but left... 11-28-2020, 05:49 PM
JeffreyDeGraff That is a bad ass set of... 11-28-2020, 05:51 PM
Flyeralan That is an awesome group of... 11-29-2020, 08:29 PM
JeffreyDeGraff I got the 32 special, 35 rem,... 11-28-2020, 05:19 PM
akpls I had a chance to add the... 11-28-2020, 06:03 PM
Jbotto Hope you all are doing well!... 12-03-2020, 03:55 PM
muforester Working on breaking down some... 12-04-2020, 10:54 PM
JeffreyDeGraff Ive never seen a powder that... 12-06-2020, 08:56 AM
Mbaker78 I had to pull about 400... 12-06-2020, 10:04 PM
JeffreyDeGraff Did that damage the bullets?... 12-07-2020, 03:37 AM
Mbaker78 Oh yeah. But they were... 12-07-2020, 10:20 AM
JeffreyDeGraff Ok. On bullets I’m going to... 12-12-2020, 09:16 AM
JeffreyDeGraff Today at the Bench..... 12-12-2020, 09:22 AM
JeffreyDeGraff Today at the Bench..... 12-28-2020, 01:43 PM
Mowgli Terry I've just finished up short... 01-02-2021, 03:48 AM
JeffreyDeGraff How did those cast loads turn... 01-03-2021, 12:47 PM
Mowgli Terry First up the 300 Mag was just... 01-04-2021, 02:01 AM
JeffreyDeGraff Ive been tempted to pick up... 01-04-2021, 08:31 AM
Mowgli Terry These projects are sequential... 01-04-2021, 09:02 AM
Jbotto It’s starting to sound like... 01-11-2021, 04:03 PM
Flyeralan I use these extensively for... 01-11-2021, 04:14 PM
JeffreyDeGraff Today at the Bench..... 01-11-2021, 04:40 PM
Jbotto I sure hope so JTD! I’m... 01-11-2021, 04:45 PM
JeffreyDeGraff I hope you aren’t going... 01-11-2021, 05:18 PM
Jbotto You guys can’t get rid of me... 01-11-2021, 06:06 PM
Mauser For the price of a tap and... 01-12-2021, 08:00 AM
Mauser I make my own modified cases... 01-12-2021, 07:58 AM
Jbotto I had thought about that, but... 01-12-2021, 12:30 PM
JeffreyDeGraff That’s a great idea.... 01-12-2021, 08:27 AM
Mauser It's an oddball tap that you... 01-12-2021, 08:55 AM
JeffreyDeGraff Just finished 190 rounds of... 01-15-2021, 03:04 PM
Flyeralan I finally got some trigger... 01-17-2021, 05:26 AM
JeffreyDeGraff Sounds like you had a great... 01-17-2021, 11:14 AM
Flyeralan JTD, I never thought of... 01-17-2021, 11:31 AM
muforester I am always afraid that I... 01-18-2021, 09:59 PM
JeffreyDeGraff What powder did that happen... 01-19-2021, 08:33 AM
muforester 185gr xtp, 8gr Unique. ... 01-19-2021, 11:40 AM
Flyeralan Yeah, I guess this is... 01-19-2021, 02:22 PM
JeffreyDeGraff Excellent to know about the... 01-17-2021, 03:12 PM
Jbotto I made that decision when I... 01-17-2021, 03:45 PM
JeffreyDeGraff I had a great weekend. Lots... 01-17-2021, 03:50 PM
Flyeralan Xtreme 230gr RN and W231 is... 01-17-2021, 05:42 PM
JeffreyDeGraff I tried 4.9gr of 231 with... 01-17-2021, 06:43 PM
muforester I love that round nose... 01-18-2021, 09:56 PM
JeffreyDeGraff Ive used down to 7.0gr of... 01-19-2021, 05:27 PM
muforester I think that is what... 01-19-2021, 05:35 PM
JeffreyDeGraff Been a slow week for me. I... 01-22-2021, 06:27 AM
muforester It has been a little slow for... 01-22-2021, 06:59 AM
JeffreyDeGraff What’s next to do for you? ... 01-22-2021, 07:13 AM
muforester I am going to finish up the... 01-22-2021, 07:20 AM
JeffreyDeGraff Can’t wait to hear how that... 01-22-2021, 07:23 AM
muforester I wonder if it is worth... 01-22-2021, 07:48 AM
Mauser I've shot 95gr V-Max out of... 01-22-2021, 01:10 PM
muforester I shot the Swede today. The... 01-24-2021, 10:01 PM
DirtGeezer I acquired a couple thousand... 01-22-2021, 03:10 PM
JeffreyDeGraff That should keep you busy. Do... 01-22-2021, 04:09 PM
DirtGeezer Yessir, I do. Squirrel Daddy... 01-22-2021, 04:36 PM
JeffreyDeGraff You are set. Let us know how... 01-22-2021, 04:37 PM
DirtGeezer Absolutely, will do. Thanks! 01-22-2021, 04:39 PM
JeffreyDeGraff This weekend was pretty... 01-25-2021, 05:19 AM
Flyeralan Wow! You were busy. I have a... 01-25-2021, 02:24 PM
JeffreyDeGraff The 45-70 is bigger around... 01-25-2021, 03:24 PM
Flyeralan That is kind of what I... 01-25-2021, 03:40 PM
JeffreyDeGraff [emoji23][emoji1787][emoji16]... 01-25-2021, 04:18 PM
muforester Put together some 44mag last... 01-27-2021, 08:50 AM
Jbotto Made a short to-do list for... 01-27-2021, 10:35 AM
muforester Put together some 6.5x55 test... 01-27-2021, 09:09 PM
JeffreyDeGraff Looking good! Need a range... 01-28-2021, 05:22 AM
Flyeralan A lazy afternoon loading some... 01-30-2021, 11:20 AM
JeffreyDeGraff I do everything on my... 01-30-2021, 01:36 PM
Flyeralan My Rockchucker was good... 01-30-2021, 01:58 PM
JeffreyDeGraff I’m a rifle guy first and... 01-30-2021, 03:19 PM
muforester I bought a Hornady AP about 4... 01-30-2021, 03:33 PM
Flyeralan I really like my AP, bought... 01-30-2021, 05:03 PM
Jamesr160@yahoo.com Everyone around me looking... 01-30-2021, 04:03 PM
JeffreyDeGraff My last trip to the range, my... 01-30-2021, 04:08 PM
Jamesr160@yahoo.com Definitely don't have to wait... 01-30-2021, 04:11 PM
Flyeralan Loading some 45 HAP's this... 01-31-2021, 11:22 AM
JeffreyDeGraff I use TONS of unique. I have... 01-31-2021, 12:04 PM
JeffreyDeGraff I didn’t get much done this... 02-01-2021, 11:09 AM
Jbotto Had the weekend at home and... 02-01-2021, 02:47 PM
Flyeralan This weekend I loaded a few... 02-01-2021, 03:28 PM
JeffreyDeGraff H450 was a popular powder. I... 02-01-2021, 04:48 PM
Flyeralan In honor of my Dad, I am... 02-05-2021, 01:54 PM
JeffreyDeGraff I love it!!!! JTD 02-05-2021, 02:26 PM
Flyeralan First test loads. My thoughts... 02-06-2021, 08:28 AM
muforester I like those semi pointed... 02-06-2021, 08:44 AM
JeffreyDeGraff I like them too! It seems... 02-06-2021, 08:47 AM
muforester Yeah, like 7mm RN bullets.... 02-06-2021, 08:52 AM
JeffreyDeGraff Ive gotten to the point where... 02-06-2021, 08:55 AM
muforester Worked on a new caliber for... 02-05-2021, 07:05 AM
JeffreyDeGraff Last night I sized some 7x57... 02-06-2021, 08:38 AM
Flyeralan , How long have you had... 02-06-2021, 08:43 AM
JeffreyDeGraff I had it built around 2003 or... 02-06-2021, 08:51 AM
JeffreyDeGraff It’s been too cold to shoot... 02-13-2021, 07:18 AM
Flyeralan Yeah, it's been too cold here... 02-13-2021, 07:31 AM
Jbotto Finally getting back to... 02-15-2021, 06:08 AM
JeffreyDeGraff Today at the Bench..... 02-15-2021, 06:21 AM
Jbotto I almost wish I had that... 02-15-2021, 07:01 AM
JeffreyDeGraff When I bought my house it was... 02-15-2021, 07:48 AM
Jbotto Today at the Bench..... 02-16-2021, 05:01 AM
JeffreyDeGraff Haven’t been at the bench... 02-21-2021, 04:28 PM
Sgt Greybeard How old is your 32 win spl? ... 02-21-2021, 07:37 PM
JeffreyDeGraff Somewhere between 1943 and... 02-21-2021, 08:28 PM
Jbotto Pulled a scope off my .338-06... 02-21-2021, 07:33 PM
JeffreyDeGraff That sucks!!!! Where are the... 02-21-2021, 08:28 PM
Jbotto The one in the picture can be... 02-21-2021, 08:36 PM
JeffreyDeGraff Good luck brother JTD 02-21-2021, 08:37 PM
muforester Put together a 30-30 test... 02-23-2021, 07:04 AM
JeffreyDeGraff I can’t wait to see how it... 02-23-2021, 10:10 AM
muforester Another 30-30 test load.... 02-23-2021, 08:42 PM
Flyeralan These loads look very good,... 02-24-2021, 02:24 PM
JeffreyDeGraff I second this... 02-24-2021, 03:32 PM
muforester Finally got to shoot these... 03-01-2021, 04:22 PM
Flyeralan So, I'm curious. Is/was the... 03-02-2021, 02:38 AM
muforester I shot a jacketed load that... 03-02-2021, 05:37 AM
Jbotto This gives me hope for when I... 02-24-2021, 12:35 PM
JeffreyDeGraff That’s a great group. My... 02-28-2021, 08:35 AM
Flyeralan JTD, what rifles do you have... 02-28-2021, 08:43 AM
JeffreyDeGraff My original was a Remington... 02-28-2021, 09:53 AM
muforester I put together these test... 03-05-2021, 08:41 AM
muforester Second test load I put... 03-08-2021, 12:30 PM
JeffreyDeGraff Finally got some time behind... 03-14-2021, 06:57 AM
SBSATS Hummm, all I have seen here... 03-16-2021, 01:36 AM
JeffreyDeGraff Today at the Bench..... 03-16-2021, 03:56 AM
muforester Started messing with an... 03-18-2021, 12:27 PM
JeffreyDeGraff Has anybody been up to... 03-28-2021, 04:53 AM
Jbotto Just bought a house. Haha. No... 03-28-2021, 05:03 AM
JeffreyDeGraff You are definitely busy with... 03-28-2021, 06:08 AM
Jbotto Oh yeah! Spent just over a... 04-05-2021, 09:15 AM
Flyeralan I have been spending any free... 03-28-2021, 06:14 AM
JeffreyDeGraff What are you going to plant?... 03-28-2021, 11:27 AM
Flyeralan JTD, keeping it small for the... 03-28-2021, 11:41 AM
JeffreyDeGraff Excellent!!!!! JTD 03-28-2021, 11:55 AM
muforester Finally got to do some... 04-05-2021, 11:16 AM
JeffreyDeGraff Excellent shooting! JTD 04-05-2021, 12:07 PM
muforester Worked on a little 9mm... 04-05-2021, 08:03 PM
JeffreyDeGraff I finally made it to the... 04-09-2021, 07:32 AM
JeffreyDeGraff I finally found some time to... 05-22-2021, 08:52 PM
Jbotto I’m halfway through my move... 05-23-2021, 04:57 AM
JeffreyDeGraff Put up some pictures of your... 05-23-2021, 12:29 PM
Jbotto Oh yeah! I will do that! I... 05-24-2021, 06:05 AM
akpls Finally got around to testing... 05-26-2021, 12:07 PM
JeffreyDeGraff Glad they went well. I had an... 05-26-2021, 03:09 PM
Flyeralan Finally got some time at the... 05-29-2021, 09:32 AM
JeffreyDeGraff That sounds like a nice... 05-30-2021, 06:46 AM
Flyeralan Almost exactly what I do with... 05-30-2021, 07:05 AM
Flyeralan I'd like to find time to see... 05-30-2021, 10:02 AM
JeffreyDeGraff I know that’s right. Ive got... 05-31-2021, 11:33 AM
Harter Not at the bench today but a... 05-29-2021, 07:53 PM
JeffreyDeGraff Very nice JTD 05-29-2021, 08:21 PM
JeffreyDeGraff Ive been doing case prep last... 05-30-2021, 06:52 AM
JeffreyDeGraff W231 is my favorite in 9mm... 05-30-2021, 07:18 AM
JeffreyDeGraff Here’s a few more Ive loaded... 05-31-2021, 11:38 AM
Flyeralan If you don't mind me asking,... 05-31-2021, 02:26 PM
JeffreyDeGraff It’s a Smith Corona 1903A3... 05-31-2021, 05:32 PM
JeffreyDeGraff Ive been on a roll today. All... 05-31-2021, 07:43 PM
Jbotto Had someone local post some... 06-09-2021, 06:11 AM
JeffreyDeGraff Got a few loads done up... 06-24-2021, 05:35 PM
Mauser How do you like that Bob AI?... 06-25-2021, 06:10 AM
JeffreyDeGraff I like it quite a bit. It is... 06-25-2021, 06:19 AM
Mauser Have a 280 AI built on that... 06-25-2021, 06:41 AM
JeffreyDeGraff Today at the Bench..... 06-25-2021, 06:54 AM
Mauser I don't own any 03s, but I'm... 06-25-2021, 09:53 AM
Flyeralan Hey, I have a question. I am... 06-25-2021, 08:51 AM
JeffreyDeGraff I’d be more than willing to... 06-25-2021, 09:06 AM
Flyeralan There is a scope on it, I... 06-25-2021, 09:42 AM
Flyeralan Ok, Internet is really lumpy... 06-25-2021, 10:03 AM
Flyeralan Here are a couple pictures.... 06-25-2021, 10:50 AM
Mauser Looks like an Interarms Mark... 06-25-2021, 11:13 AM
Flyeralan Some years back, she did this... 06-25-2021, 11:33 AM
JeffreyDeGraff Sweet! How many shots does... 06-25-2021, 11:35 AM
JeffreyDeGraff I was thinking mark x also.... 06-25-2021, 11:37 AM
JeffreyDeGraff It’s definitely a commercial... 06-25-2021, 11:30 AM
Flyeralan I have no idea. If I had to... 06-25-2021, 11:42 AM
JeffreyDeGraff Live and learn. Ive learned... 06-25-2021, 11:46 AM
Harter We have a Mk X varminter in... 06-26-2021, 06:04 AM
JeffreyDeGraff I don’t think it’s a problem... 06-26-2021, 09:03 PM
Harter I didn't mean to imply it was... 06-27-2021, 01:34 PM
JeffreyDeGraff Ah ok. Sorry I misunderstood... 06-27-2021, 02:30 PM
Flyeralan Thank you all for your input,... 06-26-2021, 10:37 AM
JeffreyDeGraff I got to the range Saturday... 07-05-2021, 10:48 AM
Flyeralan Wow! What a productive couple... 07-05-2021, 11:29 AM
JeffreyDeGraff Today at the Bench..... 07-05-2021, 11:51 AM
Flyeralan Very nice! That should be an... 07-05-2021, 11:54 AM
JeffreyDeGraff Got a few 45-70 test loads... 07-06-2021, 02:21 PM
JeffreyDeGraff I made up some 7.5x55 and... 07-08-2021, 05:55 PM
JeffreyDeGraff Here’s a new old one that... 07-12-2021, 07:58 PM
muforester I put a few loads together... 07-12-2021, 08:17 PM
Mowgli Terry I had gotten rounds loaded... 07-13-2021, 01:43 AM
Mowgli Terry Double Post 07-13-2021, 01:51 AM
JeffreyDeGraff I have read good things about... 07-13-2021, 11:00 AM
Mowgli Terry The Handi Rifle: The Handi... 07-13-2021, 11:43 AM
JeffreyDeGraff Oh wow. Yeah, the handirifle... 07-13-2021, 06:52 PM
Harter I've been struggling with my... 07-14-2021, 12:42 PM
JeffreyDeGraff That’s very cool. That guy... 07-14-2021, 04:53 PM
Harter I did an initial some of... 07-14-2021, 07:52 PM
JeffreyDeGraff Keep us updated on your... 07-15-2021, 04:05 AM
Harter I will . I have a couple of... 07-17-2021, 11:21 AM
JeffreyDeGraff What obscurities do you have?... 07-17-2021, 05:32 PM
Harter I have a 7.7 to go with the... 07-18-2021, 12:20 PM
JeffreyDeGraff Very cool stuff you have... 07-22-2021, 05:11 PM
JeffreyDeGraff Finally had a moment to sit... 09-04-2021, 10:13 AM
Jbotto Hope everyone is doing well!... 09-04-2021, 10:50 AM
JeffreyDeGraff Good to hear from you Jbotto.... 09-04-2021, 11:00 AM
Jbotto Thanks man! Everyone here... 09-04-2021, 11:14 AM
JeffreyDeGraff That’s going to be nice when... 09-04-2021, 01:11 PM
Jbotto Thanks! I hope so too! Got... 09-12-2021, 07:51 PM
JeffreyDeGraff I prepped a little nickel... 09-12-2021, 08:00 PM
Mowgli Terry In the Loading Room (Skunk... 09-13-2021, 02:38 AM
JeffreyDeGraff You had a busy weekend. I’d... 09-13-2021, 04:09 AM
Mowgli Terry I have been cleaning up this... 09-14-2021, 05:48 AM
JeffreyDeGraff Ha! I totally understand ... 09-14-2021, 05:51 AM
JeffreyDeGraff I got some 30-06 test loads... 09-15-2021, 08:08 PM
Jbotto I hope those shoot as well as... 09-18-2021, 05:25 AM
74man I loaded 300 rds of 40 S&W. 2... 09-19-2021, 07:40 PM
JeffreyDeGraff I got a chance to shoot these... 09-27-2021, 07:56 PM
Jbotto Dang man! I’d love a range... 09-27-2021, 08:57 PM
JeffreyDeGraff Sounds like a busy day. How... 09-19-2021, 07:53 PM
74man He turned 50 this year! I... 09-20-2021, 05:13 AM
Mowgli Terry Got a couple of projects... 09-20-2021, 05:51 AM
JeffreyDeGraff I’m curious as to the results... 09-20-2021, 10:44 AM
Mowgli Terry Update: Sure enough. Not a... 09-20-2021, 04:58 PM
JeffreyDeGraff Very cool. Good luck on your... 09-21-2021, 02:40 AM
Flyeralan My time and attention have... 09-20-2021, 04:42 PM
JeffreyDeGraff I know exactly what you mean!... 09-20-2021, 04:59 PM
Harter Got a dummy made up for the... 09-22-2021, 08:38 AM
muforester Those paper patch bullets are... 09-22-2021, 08:47 AM
JeffreyDeGraff How long does the patch need... 09-22-2021, 08:49 AM
muforester Put these together last... 09-22-2021, 08:51 AM
JeffreyDeGraff You haven’t shot those... 09-22-2021, 08:56 AM
Harter On theses it should cover to... 09-22-2021, 09:25 AM
JeffreyDeGraff Thanks! JTD 09-22-2021, 09:54 AM
JeffreyDeGraff Got some 7x57 loaded up... 09-28-2021, 08:09 PM
muforester Will these be for deer... 09-28-2021, 08:14 PM
JeffreyDeGraff Today at the Bench..... 09-28-2021, 08:15 PM
muforester Put together a few .223 test... 09-28-2021, 08:17 PM
JeffreyDeGraff Those would both make a great... 09-28-2021, 08:18 PM
muforester My R15 will shoot about any... 09-28-2021, 08:28 PM
JeffreyDeGraff I loaded up some (25) 30-06,... 10-01-2021, 05:43 AM
Clopez Those are some beauties right... 10-01-2021, 09:08 AM
JeffreyDeGraff Thanks. I just did some into... 10-01-2021, 09:37 AM
Clopez Wow love the nickel look!! ... 10-01-2021, 12:28 PM
muforester Working on some 300 Blackout... 12-01-2021, 08:29 PM
JeffreyDeGraff Those look awesome! Now to... 12-02-2021, 04:25 AM
muforester I hope they cycle in my AR.... 12-02-2021, 06:26 AM
Mowgli Terry I set up to run some 9mm... 12-02-2021, 01:43 AM
JeffreyDeGraff Did the swc bullets feed in... 12-02-2021, 04:27 AM
Mowgli Terry Did the swc bullets feed in... 12-02-2021, 04:55 AM
JeffreyDeGraff It sure is. Those are... 12-02-2021, 08:49 AM
Harter I had trouble with the... 12-03-2021, 07:30 PM
Mowgli Terry The Lee 358-125-RT works very... 12-05-2021, 06:25 PM
Harter Clean , warm mould . ... 12-05-2021, 07:58 PM
Mowgli Terry Thanks for your help with my... 12-06-2021, 02:24 AM
Harter I suspect that it may just be... 12-06-2021, 11:50 AM
Mowgli Terry I think the problem is with... 12-06-2021, 04:56 PM
muforester Put together a few extra 7-30... 12-06-2021, 08:03 PM
muforester Working on some 22-250 loads... 12-15-2021, 09:51 PM
JeffreyDeGraff Man, I’m jealous that you are... 12-16-2021, 09:25 AM
muforester Now I just need to find time... 12-16-2021, 02:26 PM
JeffreyDeGraff I finally got my Christmas... 12-16-2021, 04:39 PM
muforester I had a great day at the... 12-17-2021, 07:29 PM
muforester Put together a test load for... 01-06-2022, 06:46 AM
JeffreyDeGraff I had a little time this... 01-08-2022, 10:19 AM
JeffreyDeGraff Today at the Bench..... 01-13-2022, 01:47 PM
muforester Put together a few loads for... 01-22-2022, 06:24 PM
Flyeralan The Contender is one I... 01-23-2022, 08:10 AM
muforester 14" Sent from my... 01-23-2022, 08:34 AM
Flyeralan I'd love to hear how it... 01-23-2022, 11:14 AM
Flyeralan Very cool, a fun caliber for... 01-23-2022, 04:46 PM
Mowgli Terry This past week I got back... 01-28-2022, 04:14 AM
JeffreyDeGraff Glad you got some good... 01-28-2022, 04:56 PM
Harter Keep tabs on annual... 01-28-2022, 06:40 AM
JeffreyDeGraff Ive been slow at the bench... 02-07-2022, 02:29 PM
Harter No loading but I cast a few .... 02-07-2022, 03:51 PM
muforester Put together my first test... 03-04-2022, 07:23 AM
JeffreyDeGraff I hope you get to shoot it... 03-04-2022, 08:00 AM
Flyeralan That is one beautiful rifle,... 03-04-2022, 09:22 AM
muforester The 32-40 shot decent. I... 03-31-2022, 08:48 PM
Mowgli Terry I did get the 700 Mountain... 03-05-2022, 11:26 AM
JeffreyDeGraff Rcbs lube is slick,... 03-05-2022, 04:02 PM
Mowgli Terry My Hornady dies are working... 03-06-2022, 03:01 AM
JeffreyDeGraff Ive been away from the bench... 03-28-2022, 07:07 PM
Mowgli Terry Today: We did some work on... 03-28-2022, 07:51 PM
JeffreyDeGraff That sounds like an... 03-28-2022, 07:58 PM
Mowgli Terry A 256 Newton rifle: I don't... 03-29-2022, 03:03 AM
JeffreyDeGraff Sounds like an incredible... 03-29-2022, 05:04 AM
Mowgli Terry I used 100 gr, bullets in my... 03-29-2022, 05:32 AM
Harter I had the impression that the... 03-29-2022, 08:07 AM
Mowgli Terry Sometimes the way rounds got... 03-29-2022, 11:46 AM
JeffreyDeGraff Ive never used the 257... 03-29-2022, 08:26 AM
Mowgli Terry Most of my varminting was... 03-29-2022, 11:59 AM
muforester Shot some test loads in my... 03-31-2022, 08:53 PM
JeffreyDeGraff Finally have done something... 04-04-2022, 04:43 PM
Harter I found this a while back... 04-08-2022, 05:19 AM
JeffreyDeGraff Cool find. JTD 04-08-2022, 03:17 PM
Kevingc76 I did my last 200 9mm xtreams... 04-14-2022, 06:49 PM
JeffreyDeGraff What powder are you using... 04-14-2022, 07:22 PM
Kevingc76 3.8gr of titegroup. It’s a... 04-15-2022, 03:36 AM
JeffreyDeGraff I think 3.8 is what I use for... 04-15-2022, 04:24 AM
JeffreyDeGraff After way too long away from... 04-21-2022, 01:41 PM
Flyeralan Sounds good JTD! I too have... 04-23-2022, 05:31 AM
JeffreyDeGraff What caliber is your savage... 04-24-2022, 05:02 AM
Flyeralan The BR is in 6mmBR, bought it... 04-24-2022, 07:20 AM
muforester Working on test loads for a... 04-25-2022, 07:16 PM
JeffreyDeGraff Looking good! Can’t wait to... 04-25-2022, 07:39 PM
Flyeralan Those are not yet fire... 04-26-2022, 02:03 AM
muforester Correct, they are not fire... 04-26-2022, 05:52 AM
muforester My plan is to deer hunt with... 04-26-2022, 05:55 AM
Flyeralan Mine is a 15" TC Custom Shop... 04-26-2022, 06:12 AM
muforester Mine is a stainless 15"... 04-26-2022, 06:17 AM
Harter A while back I needed a semi... 04-29-2022, 04:36 PM
Flyeralan That, my friend is a... 04-29-2022, 04:42 PM
JeffreyDeGraff Great find! JTD 04-29-2022, 07:29 PM
Mowgli Terry I have a new ProChrono... 04-29-2022, 05:32 PM
JeffreyDeGraff Let us know how they do. My... 04-29-2022, 07:30 PM
JeffreyDeGraff Finally finally finished that... 05-03-2022, 07:12 AM
Harter Oh the joys of the... 05-03-2022, 02:15 PM
JeffreyDeGraff Ive never heard them called a... 05-03-2022, 03:33 PM
Harter I coined that just now . It... 05-04-2022, 01:51 PM
JeffreyDeGraff Out of all my 7x57 brass, the... 05-07-2022, 05:45 AM
Flyeralan This is a great way of doing... 05-07-2022, 07:34 AM
Flyeralan Just as a point to note.... 05-07-2022, 07:36 AM
JeffreyDeGraff Those are the best bench... 05-07-2022, 07:39 AM
Flyeralan A little off the beaten path,... 05-07-2022, 07:51 AM
JeffreyDeGraff I look at all of the 3D... 05-07-2022, 07:59 AM
JeffreyDeGraff Now I just need to settle on... 05-07-2022, 07:37 AM
Flyeralan I will! I have printed so... 05-07-2022, 08:16 AM
JeffreyDeGraff I would totally be the same... 05-07-2022, 08:18 AM
Flyeralan Here is a small sampling of... 05-07-2022, 09:08 AM
JeffreyDeGraff Very cool stuff. I love the... 05-07-2022, 09:19 AM
Flyeralan Cap done, just started the... 05-07-2022, 12:36 PM
JeffreyDeGraff Very cool!!! JTD 05-07-2022, 12:39 PM
Flyeralan Here is the finished product,... 05-08-2022, 03:49 AM
JeffreyDeGraff Today at the Bench..... 05-08-2022, 04:49 AM
JeffreyDeGraff Got my 7 test rounds loaded... 05-08-2022, 06:24 AM
JeffreyDeGraff Let there be 25-06!!! ... 05-13-2022, 06:02 PM
JeffreyDeGraff Today at the Bench..... 05-14-2022, 06:17 AM
Mowgli Terry OK, this afternoon some 270... 05-15-2022, 06:34 PM
JeffreyDeGraff Ive got 2 pounds of 4000MR,... 05-15-2022, 07:00 PM
JeffreyDeGraff I loaded up 8 more 7x57 brass... 05-20-2022, 04:28 AM
Flyeralan Your process seems solid,... 05-20-2022, 10:55 AM
JeffreyDeGraff Today at the Bench..... 05-21-2022, 10:07 AM
Harter I think I have a problem... 05-30-2022, 08:19 AM
JeffreyDeGraff I don’t see a problem JTD 05-30-2022, 08:31 AM
JeffreyDeGraff Today at the Bench..... 06-11-2022, 06:43 AM
Mowgli Terry I realize shooting some of... 06-11-2022, 08:29 AM
Harter I'm not going to push... 06-16-2022, 04:40 PM
JeffreyDeGraff Ive been working on the last... 06-15-2022, 07:03 PM
JeffreyDeGraff I finally used my lee classic... 06-18-2022, 04:27 PM
JeffreyDeGraff Ive been playing with the Lee... 06-26-2022, 06:33 AM
JeffreyDeGraff Today at the Bench..... 07-04-2022, 08:50 AM
JeffreyDeGraff I haven’t got a ton done... 07-22-2022, 04:46 AM
Flyeralan No time at the bench for me... 07-23-2022, 03:50 AM
JeffreyDeGraff I spent a little time at the... 08-03-2022, 07:25 PM
JeffreyDeGraff More and more test loads.... 08-19-2022, 01:43 PM
Flyeralan One thing I have never owned... 08-20-2022, 04:12 AM
JeffreyDeGraff The 284 Winchester won’t... 08-20-2022, 08:18 PM
Harter I got out some of Dad's stuff... 09-06-2022, 07:05 PM
Harter Working on an older press and... 09-13-2022, 01:09 PM
JeffreyDeGraff How’s everybody been? ... 09-15-2022, 07:16 PM
JeffreyDeGraff Ive been getting ready for... 10-05-2022, 04:08 AM
muforester Finally put together a good... 10-25-2022, 07:16 AM
JeffreyDeGraff I hope you hunt with it. I’m... 10-25-2022, 11:12 AM
Harter I finished up the 45 AR , did... 10-25-2022, 10:10 AM
JeffreyDeGraff Where are you at that is... 10-25-2022, 11:15 AM
JeffreyDeGraff Ive got all my hunting ammo... 10-25-2022, 11:18 AM
Harter 1837 Some of the stuff from... 10-25-2022, 12:55 PM
JeffreyDeGraff I can’t make out anything... 10-25-2022, 02:23 PM
Harter Win super , Rem UMC 30... 10-28-2022, 05:02 PM
JeffreyDeGraff Those are cool rounds to have... 10-31-2022, 11:20 AM
Harter I might try that this time .... 11-01-2022, 07:01 PM
JeffreyDeGraff What are you going to load... 11-03-2022, 06:10 PM
Harter 7×57 . Savage 110LH 24"... 11-04-2022, 07:02 AM
JeffreyDeGraff Let me know if you achieve... 11-06-2022, 02:36 PM
Harter 1839 Unique and IMR 4831 . 11-09-2022, 11:45 AM
JeffreyDeGraff Those look awesome. I’ll be... 11-09-2022, 05:05 PM
Harter 1840 First go with a rifle... 11-11-2022, 07:55 PM
JeffreyDeGraff Outstanding! That 4831 load... 11-15-2022, 10:31 AM
Harter Lots of work to do . 3" at... 11-15-2022, 08:50 PM
JeffreyDeGraff But it’s a start. I bet you... 11-17-2022, 02:20 PM
Harter The goal is always a .500... 11-17-2022, 11:28 PM
JeffreyDeGraff I find that I set different... 11-18-2022, 08:28 AM
Harter I wrote 3" at 100 those were... 11-19-2022, 12:07 PM
JeffreyDeGraff Ah! Ok. Now I agree, you’ve... 11-19-2022, 04:31 PM
muforester I havent been on for a while.... 12-02-2022, 03:47 PM
Flyeralan This is my favorite... 12-02-2022, 03:51 PM
Flyeralan Also, the cartridges in the... 12-02-2022, 03:54 PM
muforester Correct, they were not... 12-04-2022, 11:14 AM
JeffreyDeGraff Those look like miniature... 12-03-2022, 07:57 PM
Flyeralan Do you happen to know what... 12-04-2022, 04:00 PM
muforester Not sure what the twist is, I... 12-07-2022, 12:26 PM
Flyeralan I guess I've always... 12-07-2022, 03:25 PM
JeffreyDeGraff During hunting season I don’t... 12-11-2022, 10:10 AM
Harter 6mm the 100 Sierra GK wasn't... 12-11-2022, 03:22 PM
JeffreyDeGraff I feel the same way. Ive... 12-11-2022, 07:53 PM
muforester A new one I have been working... 12-11-2022, 09:33 PM
Harter Very sad day today. I filled... 12-15-2022, 01:47 PM
JeffreyDeGraff 10 pounds of red dot will... 12-15-2022, 06:44 PM
Harter Probably longer than the... 12-16-2022, 08:53 AM
JeffreyDeGraff Agreed. I love red dot in... 12-16-2022, 09:04 AM
Harter It was everything Unique is... 12-16-2022, 01:01 PM
JeffreyDeGraff I shot up the last of my... 01-01-2023, 11:13 AM
Harter 45 AR. 454424 HP , H&G #130... 01-03-2023, 05:40 PM
JeffreyDeGraff That 454424 bullet looks... 01-04-2023, 07:17 AM
muforester Put together my next 7mm... 01-04-2023, 12:01 PM
JeffreyDeGraff I’m rooting for the hot... 01-05-2023, 10:06 AM
muforester Got my last 7mm BR load... 01-10-2023, 04:25 PM
Harter So today I got out the... 01-21-2023, 01:07 PM
JeffreyDeGraff Not much going on here. I... 01-30-2023, 04:34 PM
Flyeralan I've been working at cleaning... 01-30-2023, 04:48 PM
JeffreyDeGraff I love lever action rifles,... 01-30-2023, 08:45 PM
muforester I really enjoy lever actions.... 01-30-2023, 08:49 PM
muforester Worked on some test loads for... 02-01-2023, 08:09 AM
Flyeralan That is quite a variety, lol.... 02-02-2023, 03:50 PM
muforester The bullets are 115gr Lehigh,... 02-03-2023, 11:57 AM
muforester I was finally able to shoot... 02-07-2023, 07:22 AM
muforester I have been on a pistol kick.... 02-03-2023, 11:58 AM
Flyeralan Someone's been busy. I just... 02-03-2023, 12:55 PM
Muddydawg75 Those look so nice 02-04-2023, 02:05 PM
JeffreyDeGraff I’ve been playing around with... 02-07-2023, 06:18 PM
Harter Started ..... restarted a... 02-08-2023, 12:06 PM
JeffreyDeGraff I always love when you post... 02-08-2023, 04:55 PM
Harter Barrel and stock are cut .... 02-09-2023, 10:25 AM
JeffreyDeGraff Sounds like my kinda rifle. ... 02-12-2023, 04:44 PM
Harter Interesting outcome. I got... 02-18-2023, 09:49 AM
JeffreyDeGraff That is really cool! ... 02-18-2023, 03:00 PM
Harter I ran Strelok for the 530s at... 02-18-2023, 05:47 PM
Harter I got out a box of new brass... 02-20-2023, 04:12 PM
JeffreyDeGraff Sounds like a cool old rifle.... 02-20-2023, 07:15 PM
Harter I did a batch circa 98-00' RP... 02-21-2023, 06:42 AM
JeffreyDeGraff Wow! That is a huge... 02-22-2023, 07:34 AM
Harter Air rifle shot and good B... 02-22-2023, 07:21 PM
Harter Yesterday I loaded up 20 each... 03-05-2023, 08:20 PM
JeffreyDeGraff What loads are you trying in... 03-06-2023, 04:30 AM
Harter Unique in the 25s 8-14gr .... 03-09-2023, 07:17 AM
JeffreyDeGraff That’s awesome. Can’t wait to... 03-11-2023, 02:57 PM
JeffreyDeGraff I loaded some tests with two... 03-19-2023, 07:26 PM
Harter I sent a pile of work ups... 04-04-2023, 06:32 PM
JeffreyDeGraff That’s a bunch of shooting! ... 04-04-2023, 07:26 PM
Harter 2 of us shot 6 rifles into... 04-05-2023, 03:31 AM
JeffreyDeGraff Sounds like a very productive... 04-05-2023, 06:12 AM
Harter A fellow on another forum ran... 04-08-2023, 01:26 PM
JeffreyDeGraff That’s great for the 25-06.... 04-08-2023, 02:06 PM
Harter Looks like a retry neck sized... 04-09-2023, 10:26 AM
JeffreyDeGraff Can’t wait to hear the next... 04-11-2023, 12:37 PM
Harter I have another tray of... 05-09-2023, 06:44 PM
JeffreyDeGraff I looked in an old Alliant... 05-10-2023, 02:46 PM
Harter I downloaded "the complete 45... 05-11-2023, 01:13 PM
JeffreyDeGraff The last 4 weeks or so, I... 07-01-2023, 06:50 PM
Flyeralan Yeah, I have got to get back... 07-02-2023, 04:06 AM
JeffreyDeGraff You definitely have had a lot... 07-02-2023, 05:49 AM
Flyeralan Thanks, Jeffery! We got a... 07-02-2023, 05:55 AM
JeffreyDeGraff He will be a lot of fun. That... 07-02-2023, 06:04 AM
Harter I got out to shoot a little... 07-17-2023, 02:24 PM
Harter Went back did a bunch of... 07-24-2023, 09:02 AM
JeffreyDeGraff Man, I’m glad you are getting... 07-29-2023, 12:23 PM
Andyt2 Well I do not post much but... 07-28-2023, 02:16 PM
JeffreyDeGraff What weight zinc bullets do... 07-29-2023, 12:13 PM
Andyt2 I have been casting and... 08-03-2023, 01:05 PM
JeffreyDeGraff That’s pretty cool. So my... 08-03-2023, 01:08 PM
JeffreyDeGraff I haven’t been able to make... 07-29-2023, 12:18 PM
Harter I loaded 19 more with the IMR... 07-30-2023, 01:11 PM
JeffreyDeGraff With the bigger cases, a... 07-30-2023, 01:32 PM
Harter It's tricky. It's the same as... 08-04-2023, 05:52 AM
JeffreyDeGraff That makes sense to me. What... 08-04-2023, 05:58 AM
JeffreyDeGraff Doing a little test. Last... 08-26-2023, 07:57 AM
JeffreyDeGraff Got a few test loads made up... 08-27-2023, 01:11 PM
Flyeralan I shoot a 35 Whelen, those... 08-28-2023, 04:21 PM
JeffreyDeGraff My 35 Whelen is in a... 08-28-2023, 04:54 PM
muforester Been working on a few... 08-31-2023, 04:15 PM
muforester Also working on loads for a... 08-31-2023, 04:21 PM
JeffreyDeGraff I finally got some shooting... 09-17-2023, 12:08 PM
JeffreyDeGraff Have you ever had a day when... 09-22-2023, 04:13 AM
Flyeralan Yup, have had this happen as... 09-23-2023, 02:23 AM
JeffreyDeGraff Amen to that! Sent from... 09-23-2023, 06:21 AM
JeffreyDeGraff Got a little more range time... 10-02-2023, 04:17 AM
JeffreyDeGraff Today at the Bench..... 10-15-2023, 01:25 PM
Flyeralan So after waiting patiently... 10-17-2023, 02:26 AM
JeffreyDeGraff AWESOME!! Is it 44 Magnum? ... 10-17-2023, 09:58 AM
Flyeralan Yep, 44 Magnum. Ruger has... 10-17-2023, 02:16 PM
JeffreyDeGraff Ive heard/read that Ruger is... 10-17-2023, 02:19 PM
Flyeralan Lol! However that is what I... 10-17-2023, 03:06 PM
JeffreyDeGraff Here is some pictures of my... 10-22-2023, 07:04 PM
Flyeralan Now that doesn't look bad at... 10-23-2023, 05:20 PM
JeffreyDeGraff I’ve been sighting in rifles... 10-22-2023, 07:11 PM
JeffreyDeGraff I bet that 2-7 Leupold will... 10-23-2023, 06:00 PM
JeffreyDeGraff I’ve been a busy little... 11-13-2023, 03:33 PM
muforester https://uploads.tapatalk-cdn.c... 11-18-2023, 09:31 PM
JeffreyDeGraff Big Medicine. Sent from... 11-19-2023, 03:05 AM
muforester That Barnes load kicks so... 11-24-2023, 09:10 AM
muforester Working on a new one I am... 11-28-2023, 09:19 PM
JeffreyDeGraff Love it!!! Sent from my... 11-29-2023, 01:26 PM
muforester I like these... 11-30-2023, 07:08 PM
JeffreyDeGraff I’ve been hammering out some... 12-06-2023, 08:55 AM
JeffreyDeGraff Playing around with the 250... 12-10-2023, 04:04 PM
JeffreyDeGraff 6.5x55. 140gr Sierra gameking... 12-12-2023, 07:06 PM
JeffreyDeGraff I got most of everything I’ve... 12-18-2023, 06:26 PM
JeffreyDeGraff I’ve been reloading and... 01-10-2024, 08:14 PM
muforester Here is a few I have been... 01-25-2024, 05:39 PM
Flyeralan Can I ask what firearm you... 01-26-2024, 03:13 PM
muforester 14” Contender Sent from... 01-27-2024, 04:53 PM
Harter One hundred each 45 Colts in... 02-11-2024, 04:20 PM
JeffreyDeGraff Looking good! 10.0gr should... 02-11-2024, 05:16 PM
Harter Speed #12 says 10-11 for... 02-13-2024, 05:14 PM
Harter Did another 200 Colts today .... 02-18-2024, 06:43 PM
JeffreyDeGraff Man, you really mix and match... 02-18-2024, 07:57 PM
muforester A few more I have been... 02-18-2024, 07:12 PM
JeffreyDeGraff Time to go shoot those... 02-18-2024, 07:58 PM
Harter It's a 1917 and has to retain... 02-19-2024, 02:52 AM
Harter 358 Win 360-238 XCB NOE , 20... 03-28-2024, 05:08 PM
Harter I shot all of that up in like... 12-03-2024, 05:21 PM
Harter Loaded 30 7×57 , 6 loads of... 12-23-2024, 04:16 PM
Harter Transfer to small sheets from... 12-30-2024, 05:47 PM
Previous Post Previous Post   Next Post Next Post
  1. #1
    JeffreyDeGraff's Avatar
    Title
    Premium Member
    Join Date
    Jul 2018
    Location
    North Texas
    Posts
    2,367
    Quote Originally Posted by muforester View Post
    I like those semi pointed bullets. I found a couple boxes of Hornady 100gr 6mm RN at my LGS a while back. I loaded them in my 6mm Remington, they shoot great.

    Sent from my SAMSUNG-SM-G930A using Tapatalk
    I like them too! It seems all of the really cool bullets that I like, have all been discontinued to make space for super high BC sleek pointy bullets.


    JTD

  2. #2
    muforester's Avatar
    Title
    Premium Member
    Join Date
    Sep 2018
    Posts
    295
    Quote Originally Posted by JeffreyDeGraff View Post
    I like them too! It seems all of the really cool bullets that I like, have all been discontinued to make space for super high BC sleek pointy bullets.


    JTD
    Yeah, like 7mm RN bullets. How I wish I could find some those for my 7x57.

    Sent from my SAMSUNG-SM-G930A using Tapatalk

  3. #3
    JeffreyDeGraff's Avatar
    Title
    Premium Member
    Join Date
    Jul 2018
    Location
    North Texas
    Posts
    2,367
    Quote Originally Posted by muforester View Post
    Yeah, like 7mm RN bullets. How I wish I could find some those for my 7x57.

    Sent from my SAMSUNG-SM-G930A using Tapatalk
    Ive gotten to the point where I don’t like to load my old discontinued bullets because once they are gone, they are gone. No replacing them. I always keep a lookout for them, but haven’t seen any in years.


    JTD

Similar Threads

  1. What's everyone reloading today?
    By Guns4545 in forum General Reloading questions (Reloading 101)
    Replies: 19
    Last Post: 11-05-2018, 08:14 PM
  2. Not today Bloomberg, you douche.
    By Dougthatsit in forum Politics
    Replies: 6
    Last Post: 10-20-2018, 08:20 AM
  3. Cabelas today Aug 14 :(
    By Topkick in forum General Firearms Discussion
    Replies: 18
    Last Post: 09-08-2018, 10:58 AM
  4. Tried this combo today
    By Clopez in forum Rifle Reloading (General)
    Replies: 13
    Last Post: 09-01-2018, 05:13 AM
  5. found all this today
    By denton in forum The Basement (NSFW)
    Replies: 10
    Last Post: 08-12-2018, 04:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •