Donate to Sages

Results 1 to 10 of 798

Thread: Today at the Bench.....

Thread Tools
- Show Printable Version
Search Thread
- Advanced Search
Display
- Switch to Linear Mode
- Switch to Hybrid Mode
- Threaded Mode

Threaded View

Jbotto Today at the Bench..... 05-01-2020, 06:14 PM

Jbotto I’ll start with mine. After... 05-01-2020, 06:20 PM

JeffreyDeGraff Ive been spending a lot of... 05-01-2020, 06:57 PM

Jbotto Lots of variety there in your... 05-02-2020, 02:28 PM

JeffreyDeGraff I’m playing catch up from the... 05-02-2020, 02:37 PM

Flyeralan Using up the last of these... 08-15-2020, 09:33 AM

Flyeralan Well, my bench time to range... 02-28-2021, 06:24 AM

More replies below current depth...

JeffreyDeGraff Ive also been working on... 05-01-2020, 07:04 PM

JeffreyDeGraff I hope some others jump in. I... 05-01-2020, 07:09 PM

JeffreyDeGraff Oh dang. Forgot to mention... 05-01-2020, 08:12 PM

Jbotto I got some time at the bench... 05-02-2020, 02:27 PM

JeffreyDeGraff Today I loaded 2 loads with... 05-02-2020, 02:35 PM

Mbaker78 Over the last few days I’ve... 05-02-2020, 04:59 PM

JeffreyDeGraff Keep us up to date in those... 05-02-2020, 06:31 PM

Jbotto I just added another 20 cases... 05-02-2020, 05:52 PM

JeffreyDeGraff I sized and primed 700 357mag... 05-02-2020, 06:33 PM

Jbotto Dang! We’re you doing these... 05-03-2020, 04:02 AM

JeffreyDeGraff Rock chucker and a hand... 05-03-2020, 05:04 AM

Jbotto That’s how I do it too except... 05-03-2020, 05:26 AM

More replies below current depth...

Jbotto Was finishing up last night... 05-03-2020, 04:01 AM

JeffreyDeGraff Are you able to drift the... 05-03-2020, 06:47 PM

Jbotto Yes sir. Drilled and tapped... 05-04-2020, 05:04 PM

JeffreyDeGraff Great rifle!!! Anybody load... 05-04-2020, 05:10 PM

Jbotto Nope, I didn’t get time to do... 05-05-2020, 03:11 AM

Jbotto Yesterday afternoon I got... 05-09-2020, 07:30 AM

JeffreyDeGraff I do the same thing with my... 05-09-2020, 09:58 AM

JeffreyDeGraff I managed to load up 3 test... 05-09-2020, 07:34 AM

Jbotto Today at the Bench..... 05-15-2020, 06:25 PM

JeffreyDeGraff We are supposed to have rain... 05-15-2020, 07:26 PM

JeffreyDeGraff I managed to load a few test... 05-15-2020, 07:25 PM

JeffreyDeGraff Got some more 6.5-284 test... 05-16-2020, 05:42 AM

Jbotto Today at the Bench..... 05-16-2020, 11:51 AM

JeffreyDeGraff What load did you settle on... 05-16-2020, 12:32 PM

Jbotto Ha. Thanks for making me... 05-16-2020, 02:58 PM

JeffreyDeGraff Have you been able to get a... 05-16-2020, 03:42 PM

Jbotto Today at the Bench..... 05-16-2020, 04:03 PM

Flyeralan Not quite reloading, but my... 05-16-2020, 01:39 PM

JeffreyDeGraff Awesome!!! JTD 05-16-2020, 03:40 PM

Jbotto Awesome! Those will handle... 05-16-2020, 04:03 PM

Mbaker78 I haven’t sat down at the... 05-17-2020, 03:51 AM

Jbotto Glad to hear the guy is ok.... 05-17-2020, 05:58 AM

Mbaker78 People, as a general rule,... 05-17-2020, 06:02 AM

JeffreyDeGraff I couldn’t agree more! ... 05-17-2020, 06:13 AM

JeffreyDeGraff Today at the Bench..... 05-17-2020, 05:24 PM

JeffreyDeGraff Cleaning brass tonight.... 05-19-2020, 04:34 PM

Mbaker78 I made up a couple hundred... 05-19-2020, 05:15 PM

JeffreyDeGraff That’s one thing I have never... 05-19-2020, 06:02 PM

Mbaker78 I'm laid off right now, so I... 05-19-2020, 06:33 PM

JeffreyDeGraff You definitely have the time,... 05-19-2020, 06:53 PM

Mbaker78 I'm making the most of it.... 05-19-2020, 06:54 PM

JeffreyDeGraff Excellent. I’m glad you’re... 05-19-2020, 07:03 PM

JeffreyDeGraff Made up some 7.62x54R test... 05-21-2020, 06:45 PM

Mbaker78 Coated, sized, and gas... 05-22-2020, 05:57 PM

JeffreyDeGraff Got my 8mm Mauser test loads... 05-23-2020, 08:33 AM

JeffreyDeGraff I had an interesting day... 05-24-2020, 07:05 PM

Jbotto Sounds like a bit of... 05-27-2020, 03:29 AM

JeffreyDeGraff I got them all loaded up,... 05-27-2020, 03:51 AM

Jbotto Been doing that same thing... 05-30-2020, 09:56 AM

Mbaker78 I cast up a few hundred... 06-02-2020, 05:02 AM

JeffreyDeGraff Staying out of trouble,... 06-02-2020, 05:47 AM

JeffreyDeGraff I just got through depriming... 06-03-2020, 05:10 PM

Flyeralan Just off work a couple hours... 06-04-2020, 04:36 AM

JeffreyDeGraff I got all my brass cleaned... 06-08-2020, 07:11 AM

Mbaker78 I sized all of the bullets I... 06-08-2020, 07:24 AM

JeffreyDeGraff That lee app press seems to... 06-08-2020, 07:33 AM

Mbaker78 As is usual with Lee, it has... 06-10-2020, 03:18 AM

JeffreyDeGraff Fireformed some of the 6mm... 06-09-2020, 01:09 PM

Jbotto Made it out to shoot... 06-13-2020, 06:46 AM

Jbotto I also made an order of some... 06-13-2020, 06:47 AM

JeffreyDeGraff Keep us posted on those... 06-13-2020, 09:33 AM

Jbotto That’s a good idea about the... 06-13-2020, 02:18 PM

JeffreyDeGraff Today I was able to get my... 06-13-2020, 04:52 PM

Jbotto Redid some test loads for my... 06-13-2020, 08:24 PM

Jbotto I got those 9 pieces of... 06-14-2020, 05:12 AM

JeffreyDeGraff I got my R-P 300 savage brass... 06-14-2020, 07:03 PM

Mbaker78 I finally got out and shot... 06-16-2020, 05:20 PM

JeffreyDeGraff Great. Glad you got out. Got... 06-16-2020, 05:28 PM

Mbaker78 Not that I'm willing to share... 06-16-2020, 05:30 PM

JeffreyDeGraff Understood! JTD 06-16-2020, 05:31 PM

Mbaker78 25y would've been optimal for... 06-16-2020, 05:33 PM

JeffreyDeGraff As long as you got the data... 06-16-2020, 05:38 PM

JeffreyDeGraff I was able to size, prep, and... 06-16-2020, 05:34 PM

Mbaker78 I got my 75hr BTHP in a... 06-16-2020, 05:45 PM

JeffreyDeGraff Let us know how that 308... 06-16-2020, 05:52 PM

JeffreyDeGraff I got the rest of my 7.62... 06-20-2020, 03:50 PM

Mbaker78 Here's one I'll share, from... 06-21-2020, 09:59 AM

JeffreyDeGraff That one is definitely worth... 06-21-2020, 11:24 AM

Jbotto How is it Thursday night... 06-25-2020, 08:35 PM

JeffreyDeGraff Ive been turning necks this... 06-26-2020, 05:16 AM

Jbotto Brass prep of any kind sucks.... 06-27-2020, 05:09 AM

Mbaker78 I have so many different... 06-27-2020, 05:16 AM

Jbotto Today at the Bench..... 06-27-2020, 08:05 PM

JeffreyDeGraff IMR 4064 is temp sensitive.... 06-27-2020, 08:24 PM

Jbotto From what I read it seems... 06-28-2020, 06:17 AM

Flyeralan Finally getting back to the... 06-28-2020, 12:11 PM

JeffreyDeGraff Glad you’re back at it. Good... 06-28-2020, 12:51 PM

JeffreyDeGraff Sizing some black hills... 07-01-2020, 01:19 PM

Mbaker78 I'm back to work, so I... 07-01-2020, 01:22 PM

JeffreyDeGraff Oh nice! Glad you’re back to... 07-01-2020, 01:31 PM

Mbaker78 I don’t know how I missed the... 07-02-2020, 07:31 AM

JeffreyDeGraff That will be interesting to... 07-02-2020, 10:41 AM

Mbaker78 Turns out my old phone got... 07-03-2020, 08:52 AM

Jbotto Thanks for posting that! ... 07-04-2020, 03:40 AM

JeffreyDeGraff Good luck! Put up some pdog... 07-04-2020, 04:00 AM

Mbaker78 Here's what little data I... 07-03-2020, 08:54 AM

JeffreyDeGraff That’s still an interesting... 07-03-2020, 08:23 PM

JeffreyDeGraff Got my 6.5-284 brass trimmed... 07-03-2020, 08:25 PM

Jbotto Today at the Bench..... 07-04-2020, 10:31 AM

JeffreyDeGraff That varmageddon is supposed... 07-04-2020, 10:37 AM

Jbotto It seems that one in four or... 07-04-2020, 11:28 AM

Jbotto When they go on sale I buy a... 07-04-2020, 11:34 AM

Jbotto This morning so far I have... 07-05-2020, 06:28 AM

JeffreyDeGraff You sound like me. Always... 07-05-2020, 06:32 AM

Jbotto It just usually works that... 07-05-2020, 07:51 PM

JeffreyDeGraff First is an old 5-15x50... 07-05-2020, 08:09 PM

Jbotto Those scopes look nice on... 07-06-2020, 03:03 AM

Mbaker78 I chamfered, deburred, and... 07-05-2020, 09:18 PM

JeffreyDeGraff How do you do all of your... 07-06-2020, 02:21 AM

Mbaker78 I size the 308 on a single... 07-07-2020, 05:40 AM

JeffreyDeGraff I got 18 ppu 7x57 Bess sized... 07-06-2020, 07:52 PM

JeffreyDeGraff I use the frankford arsenal... 07-07-2020, 01:58 PM

JeffreyDeGraff Today at the Bench..... 07-11-2020, 10:53 AM

Mbaker78 I spent the better part of... 07-11-2020, 01:08 PM

JeffreyDeGraff That should be a great time! ... 07-11-2020, 01:47 PM

Jbotto No reloading for me this... 07-12-2020, 04:53 AM

JeffreyDeGraff I was able to get a few test... 07-12-2020, 05:34 AM

Flyeralan Finally getting time to load... 07-12-2020, 01:10 PM

JeffreyDeGraff Excellent! JTD 07-12-2020, 02:51 PM

Mbaker78 I didn't make it to the range... 07-12-2020, 02:48 PM

JeffreyDeGraff Today at the Bench..... 07-12-2020, 02:51 PM

Mbaker78 Nah, they’ll get shot... 07-12-2020, 04:51 PM

Flyeralan Loading up some subsonic 147... 07-19-2020, 06:44 AM

JeffreyDeGraff What powder are you using? ... 07-19-2020, 07:20 AM

Flyeralan I am using Titegroup, just... 07-19-2020, 07:40 AM

JeffreyDeGraff Awesome. Let us know how it... 07-19-2020, 07:54 AM

Flyeralan Well, I did try out the... 08-16-2020, 09:10 AM

JeffreyDeGraff Outstanding! I love it when... 08-16-2020, 09:16 AM

Flyeralan Will do, I also got my first... 07-19-2020, 01:17 PM

Mbaker78 I just swapped the loadmaster... 07-19-2020, 03:20 PM

Flyeralan Good luck with the blackout... 07-19-2020, 04:55 PM

JeffreyDeGraff I agree. Hope all goes well... 07-19-2020, 05:04 PM

Mbaker78 It should go well, she’s... 07-19-2020, 06:04 PM

JeffreyDeGraff The second one always seems... 07-19-2020, 06:07 PM

Mbaker78 She actually dislocated her... 07-19-2020, 07:17 PM

Jbotto Been busy packing and making... 07-22-2020, 09:17 AM

Jbotto ...I typed that on 7/22 ... 08-20-2020, 09:23 PM

JeffreyDeGraff Doing great. The crew and I... 07-22-2020, 10:57 AM

JeffreyDeGraff I pulled out my Hornady 243... 07-26-2020, 05:54 AM

Jbotto Today at the Bench..... 08-04-2020, 08:36 PM

JeffreyDeGraff Great find and even better... 08-05-2020, 02:26 AM

JeffreyDeGraff I finally was able to sit at... 08-09-2020, 04:03 PM

Mbaker78 I actually spent some time at... 08-09-2020, 04:19 PM

JeffreyDeGraff I agree. Felt really good. ... 08-09-2020, 04:34 PM

Mbaker78 I went out and expended some... 08-11-2020, 07:18 PM

Mbaker78 Last night I finished sizing... 08-16-2020, 10:58 AM

Mbaker78 Figured I should post my... 08-16-2020, 10:59 AM

Flyeralan Can you give a few details on... 08-16-2020, 11:24 AM

Mbaker78 18" 223 Wylde, PSA lower,... 08-17-2020, 08:35 AM

JeffreyDeGraff Very nice. JTD 08-16-2020, 12:28 PM

Jbotto No reloading done yet after... 08-17-2020, 05:59 AM

JeffreyDeGraff You will be there soon... 08-17-2020, 06:48 AM

Jbotto https://uploads.tapatalk-cdn.c... 08-18-2020, 06:41 AM

JeffreyDeGraff You’re getting there. ... 08-18-2020, 07:22 AM

Jbotto Sure am! I got more done... 08-18-2020, 07:14 PM

JeffreyDeGraff Awesome. Glad you are back at... 08-21-2020, 02:46 AM

JeffreyDeGraff I finally got to the bench... 08-21-2020, 06:39 PM

Jbotto Glad you got back to it after... 08-22-2020, 07:09 AM

JeffreyDeGraff I normally use unique in my... 08-22-2020, 07:40 PM

Jbotto Good enough reason to try and... 08-22-2020, 10:33 PM

Mbaker78 I have so many partial cans... 08-23-2020, 05:12 AM

Jbotto Today at the Bench..... 08-22-2020, 07:07 AM

Flyeralan I've got to do some of these... 08-22-2020, 07:28 AM

Jbotto Seems like I’ve heard either... 08-22-2020, 10:32 PM

JeffreyDeGraff I had a great range trip... 08-24-2020, 04:34 AM

Jbotto Glad you had a productive day... 08-24-2020, 09:51 AM

JeffreyDeGraff You’ve got 50 loaded rounds... 08-24-2020, 10:38 AM

Jbotto Thanks, yeah 50 left of the... 08-24-2020, 11:51 AM

Mbaker78 I hand or bench prime as... 08-24-2020, 01:13 PM

Jbotto I use a Lee hand primer but I... 08-24-2020, 09:33 PM

Mbaker78 I made it to the range... 08-24-2020, 10:14 AM

JeffreyDeGraff Sounds like you had a good... 08-24-2020, 10:43 AM

Mbaker78 It was only a friend and I at... 08-24-2020, 10:48 AM

Mauser I prepped, aka sized, primed... 08-24-2020, 10:55 AM

JeffreyDeGraff This evening I got my nickel... 08-26-2020, 06:58 PM

Jbotto Last night I sat down and... 08-27-2020, 06:07 AM

JeffreyDeGraff Finally got some crap done... 08-30-2020, 02:20 PM

Flyeralan Sounds like a productive... 08-30-2020, 04:01 PM

JeffreyDeGraff Today at the Bench..... 08-30-2020, 04:06 PM

Flyeralan I am trying 3.3-3.5 grains of... 08-30-2020, 05:03 PM

Flyeralan JTD, I spent a few hours at... 09-01-2020, 05:30 AM

Mbaker78 I primed all of the remaining... 08-30-2020, 04:08 PM

JeffreyDeGraff Sounds like everyone having a... 08-30-2020, 04:29 PM

JeffreyDeGraff These are some of my current... 08-30-2020, 04:47 PM

JeffreyDeGraff Awesome. That’s great... 09-01-2020, 05:32 AM

JeffreyDeGraff Today at the Bench..... 09-01-2020, 05:58 AM

Mbaker78 I’ve spent the last couple... 09-06-2020, 07:40 AM

Mbaker78 Went out with a friend... 09-14-2020, 08:54 AM

JeffreyDeGraff You’ve been busy. I’m all... 09-14-2020, 06:03 PM

Mbaker78 I'm transitioning back to... 09-14-2020, 06:05 PM

JeffreyDeGraff Reloading, definitely. ... 09-15-2020, 12:32 PM

Mbaker78 I enjoy playing video games... 09-15-2020, 01:10 PM

JeffreyDeGraff Went to the range today. Took... 09-20-2020, 04:56 PM

Jamesr160@yahoo.com 34gn hp going 2000 fps in a... 09-25-2020, 05:50 PM

JeffreyDeGraff Today at the Bench..... 09-25-2020, 05:58 PM

Jamesr160@yahoo.com Fn57 and ps90. Sent from... 09-25-2020, 06:00 PM

JeffreyDeGraff Outstanding! JTD 09-25-2020, 06:06 PM

JeffreyDeGraff After last weeks range... 09-26-2020, 05:45 AM

Jbotto Looking good! I think that... 09-26-2020, 06:37 AM

JeffreyDeGraff I find stuff, all the time,... 09-26-2020, 06:46 AM

Jbotto Today at the Bench..... 09-26-2020, 03:40 PM

More replies below current depth...

Flyeralan I too am fascinated by the... 09-26-2020, 08:14 AM

JeffreyDeGraff I love the old Remington 700... 09-26-2020, 08:51 AM

Flyeralan Yep, it is a beautiful gun. I... 09-26-2020, 09:35 AM

JeffreyDeGraff Ha! Most of the guns I shoot... 09-26-2020, 10:44 AM

Flyeralan I shoot the 200gr Hornady... 09-26-2020, 12:19 PM

Mbaker78 I melted down the undersized... 09-26-2020, 12:37 PM

JeffreyDeGraff I was wondering how the... 09-26-2020, 03:19 PM

Mbaker78 It just made a huge stink and... 09-26-2020, 03:47 PM

JeffreyDeGraff I found a little more time... 09-27-2020, 07:09 AM

JeffreyDeGraff I had some free time today... 10-02-2020, 02:36 PM

JeffreyDeGraff Today at the Bench..... 10-03-2020, 02:39 PM

Jamesr160@yahoo.com Today at the other bench. ... 10-03-2020, 03:06 PM

JeffreyDeGraff Oh nice! Ive never cast my... 10-03-2020, 03:08 PM

Jbotto Been too long away from the... 10-09-2020, 08:31 AM

JeffreyDeGraff I used to use the lee... 10-10-2020, 05:36 AM

Jbotto They are quicker for me than... 10-10-2020, 06:15 AM

JeffreyDeGraff They definitely work well. I... 10-10-2020, 06:48 AM

Jbotto You can! I’ve never done it... 10-12-2020, 08:55 AM

JeffreyDeGraff I’ve been crazy busy lately,... 10-21-2020, 04:26 AM

Jbotto Same here JTD! I did end up... 10-21-2020, 06:08 AM

JeffreyDeGraff Outstanding!!! Nice doe! ... 10-21-2020, 06:46 AM

JeffreyDeGraff Finally got my 257 Roberts... 10-22-2020, 02:16 PM

Flyeralan You got a couple of fav's... 10-22-2020, 03:06 PM

JeffreyDeGraff Ive never killed anything... 10-22-2020, 03:15 PM

Flyeralan I've killed many a PA... 10-23-2020, 03:26 AM

More replies below current depth...

Jbotto JTD, what are you planning on... 10-23-2020, 07:35 AM

JeffreyDeGraff I’m going to load some 95gr... 10-23-2020, 07:44 AM

Jbotto Today at the Bench..... 10-23-2020, 10:03 AM

JeffreyDeGraff Ive heard that about the... 10-24-2020, 06:54 PM

JeffreyDeGraff I got a few things done to... 10-24-2020, 06:57 PM

JeffreyDeGraff Got the starline creedmoor... 10-26-2020, 07:26 AM

Flyeralan I have been reloading 243 for... 10-26-2020, 01:45 PM

JeffreyDeGraff That is pretty interesting.... 10-26-2020, 02:42 PM

Jbotto Glad those dies are working... 10-26-2020, 07:32 AM

JeffreyDeGraff Well, my 243 brass is all... 10-31-2020, 09:12 AM

Mbaker78 I just got my M&P40 slide... 10-31-2020, 09:41 AM

JeffreyDeGraff That looks sharp! JTD 10-31-2020, 10:44 AM

Mbaker78 Thanks, I just have to try to... 11-01-2020, 10:30 AM

JeffreyDeGraff I know that feeling. Ive got... 11-01-2020, 11:00 AM

Mbaker78 I also have another test set... 11-02-2020, 01:57 PM

JeffreyDeGraff I haven’t seen the accutips... 11-02-2020, 02:20 PM

JeffreyDeGraff Today at the Bench..... 11-06-2020, 12:47 PM

Jbotto Sounds like you have... 11-07-2020, 10:31 AM

JeffreyDeGraff Finally done with all my... 11-08-2020, 08:27 PM

JeffreyDeGraff Today at the Bench..... 11-17-2020, 05:35 PM

muforester I love those flat point... 11-21-2020, 12:12 AM

JeffreyDeGraff So do I! I hope somewhere... 11-21-2020, 05:54 AM

JeffreyDeGraff My bench has been boring... 11-23-2020, 07:58 PM

Jbotto You think your bench has been... 11-23-2020, 10:26 PM

Mbaker78 My eldest son is home on... 11-24-2020, 04:59 AM

akpls Been pretty busy at my bench... 11-25-2020, 12:09 PM

JeffreyDeGraff That’s a good selection. What... 11-25-2020, 12:17 PM

akpls I had been going with 40 gr.... 11-25-2020, 12:25 PM

muforester I have some of the 39gr TNTs... 11-25-2020, 01:07 PM

JeffreyDeGraff Wow! 5 204’s. That’s... 11-28-2020, 05:10 PM

akpls Not a great photo, but left... 11-28-2020, 05:49 PM

JeffreyDeGraff That is a bad ass set of... 11-28-2020, 05:51 PM

Flyeralan That is an awesome group of... 11-29-2020, 08:29 PM

JeffreyDeGraff I got the 32 special, 35 rem,... 11-28-2020, 05:19 PM

akpls I had a chance to add the... 11-28-2020, 06:03 PM

Jbotto Hope you all are doing well!... 12-03-2020, 03:55 PM

muforester Working on breaking down some... 12-04-2020, 10:54 PM

JeffreyDeGraff Ive never seen a powder that... 12-06-2020, 08:56 AM

Mbaker78 I had to pull about 400... 12-06-2020, 10:04 PM

JeffreyDeGraff Did that damage the bullets?... 12-07-2020, 03:37 AM

Mbaker78 Oh yeah. But they were... 12-07-2020, 10:20 AM

JeffreyDeGraff Ok. On bullets I’m going to... 12-12-2020, 09:16 AM

JeffreyDeGraff Today at the Bench..... 12-12-2020, 09:22 AM

JeffreyDeGraff Today at the Bench..... 12-28-2020, 01:43 PM

Mowgli Terry I've just finished up short... 01-02-2021, 03:48 AM

JeffreyDeGraff How did those cast loads turn... 01-03-2021, 12:47 PM

Mowgli Terry First up the 300 Mag was just... 01-04-2021, 02:01 AM

JeffreyDeGraff Ive been tempted to pick up... 01-04-2021, 08:31 AM

Mowgli Terry These projects are sequential... 01-04-2021, 09:02 AM

Jbotto It’s starting to sound like... 01-11-2021, 04:03 PM

Flyeralan I use these extensively for... 01-11-2021, 04:14 PM

JeffreyDeGraff Today at the Bench..... 01-11-2021, 04:40 PM

Jbotto I sure hope so JTD! I’m... 01-11-2021, 04:45 PM

JeffreyDeGraff I hope you aren’t going... 01-11-2021, 05:18 PM

Jbotto You guys can’t get rid of me... 01-11-2021, 06:06 PM

Mauser For the price of a tap and... 01-12-2021, 08:00 AM

Mauser I make my own modified cases... 01-12-2021, 07:58 AM

Jbotto I had thought about that, but... 01-12-2021, 12:30 PM

JeffreyDeGraff That’s a great idea.... 01-12-2021, 08:27 AM

Mauser It's an oddball tap that you... 01-12-2021, 08:55 AM

JeffreyDeGraff Just finished 190 rounds of... 01-15-2021, 03:04 PM

Flyeralan I finally got some trigger... 01-17-2021, 05:26 AM

JeffreyDeGraff Sounds like you had a great... 01-17-2021, 11:14 AM

Flyeralan JTD, I never thought of... 01-17-2021, 11:31 AM

muforester I am always afraid that I... 01-18-2021, 09:59 PM

JeffreyDeGraff What powder did that happen... 01-19-2021, 08:33 AM

muforester 185gr xtp, 8gr Unique. ... 01-19-2021, 11:40 AM

Flyeralan Yeah, I guess this is... 01-19-2021, 02:22 PM

JeffreyDeGraff Excellent to know about the... 01-17-2021, 03:12 PM

Jbotto I made that decision when I... 01-17-2021, 03:45 PM

JeffreyDeGraff I had a great weekend. Lots... 01-17-2021, 03:50 PM

Flyeralan Xtreme 230gr RN and W231 is... 01-17-2021, 05:42 PM

JeffreyDeGraff I tried 4.9gr of 231 with... 01-17-2021, 06:43 PM

muforester I love that round nose... 01-18-2021, 09:56 PM

JeffreyDeGraff Ive used down to 7.0gr of... 01-19-2021, 05:27 PM

muforester I think that is what... 01-19-2021, 05:35 PM

JeffreyDeGraff Been a slow week for me. I... 01-22-2021, 06:27 AM

muforester It has been a little slow for... 01-22-2021, 06:59 AM

JeffreyDeGraff What’s next to do for you? ... 01-22-2021, 07:13 AM

muforester I am going to finish up the... 01-22-2021, 07:20 AM

JeffreyDeGraff Can’t wait to hear how that... 01-22-2021, 07:23 AM

muforester I wonder if it is worth... 01-22-2021, 07:48 AM

Mauser I've shot 95gr V-Max out of... 01-22-2021, 01:10 PM

muforester I shot the Swede today. The... 01-24-2021, 10:01 PM

DirtGeezer I acquired a couple thousand... 01-22-2021, 03:10 PM

JeffreyDeGraff That should keep you busy. Do... 01-22-2021, 04:09 PM

DirtGeezer Yessir, I do. Squirrel Daddy... 01-22-2021, 04:36 PM

JeffreyDeGraff You are set. Let us know how... 01-22-2021, 04:37 PM

DirtGeezer Absolutely, will do. Thanks! 01-22-2021, 04:39 PM

JeffreyDeGraff This weekend was pretty... 01-25-2021, 05:19 AM

Flyeralan Wow! You were busy. I have a... 01-25-2021, 02:24 PM

JeffreyDeGraff The 45-70 is bigger around... 01-25-2021, 03:24 PM

Flyeralan That is kind of what I... 01-25-2021, 03:40 PM

JeffreyDeGraff [emoji23][emoji1787][emoji16]... 01-25-2021, 04:18 PM

muforester Put together some 44mag last... 01-27-2021, 08:50 AM

Jbotto Made a short to-do list for... 01-27-2021, 10:35 AM

muforester Put together some 6.5x55 test... 01-27-2021, 09:09 PM

JeffreyDeGraff Looking good! Need a range... 01-28-2021, 05:22 AM

Flyeralan A lazy afternoon loading some... 01-30-2021, 11:20 AM

JeffreyDeGraff I do everything on my... 01-30-2021, 01:36 PM

Flyeralan My Rockchucker was good... 01-30-2021, 01:58 PM

JeffreyDeGraff I’m a rifle guy first and... 01-30-2021, 03:19 PM

muforester I bought a Hornady AP about 4... 01-30-2021, 03:33 PM

Flyeralan I really like my AP, bought... 01-30-2021, 05:03 PM

Jamesr160@yahoo.com Everyone around me looking... 01-30-2021, 04:03 PM

JeffreyDeGraff My last trip to the range, my... 01-30-2021, 04:08 PM

Jamesr160@yahoo.com Definitely don't have to wait... 01-30-2021, 04:11 PM

Flyeralan Loading some 45 HAP's this... 01-31-2021, 11:22 AM

JeffreyDeGraff I use TONS of unique. I have... 01-31-2021, 12:04 PM

JeffreyDeGraff I didn’t get much done this... 02-01-2021, 11:09 AM

Jbotto Had the weekend at home and... 02-01-2021, 02:47 PM

Flyeralan This weekend I loaded a few... 02-01-2021, 03:28 PM

JeffreyDeGraff H450 was a popular powder. I... 02-01-2021, 04:48 PM

Flyeralan In honor of my Dad, I am... 02-05-2021, 01:54 PM

JeffreyDeGraff I love it!!!! JTD 02-05-2021, 02:26 PM

Flyeralan First test loads. My thoughts... 02-06-2021, 08:28 AM

More replies below current depth...

More replies below current depth...

muforester Worked on a new caliber for... 02-05-2021, 07:05 AM

JeffreyDeGraff Last night I sized some 7x57... 02-06-2021, 08:38 AM

Flyeralan , How long have you had... 02-06-2021, 08:43 AM

JeffreyDeGraff I had it built around 2003 or... 02-06-2021, 08:51 AM

JeffreyDeGraff It’s been too cold to shoot... 02-13-2021, 07:18 AM

Flyeralan Yeah, it's been too cold here... 02-13-2021, 07:31 AM

Jbotto Finally getting back to... 02-15-2021, 06:08 AM

JeffreyDeGraff Today at the Bench..... 02-15-2021, 06:21 AM

Jbotto I almost wish I had that... 02-15-2021, 07:01 AM

JeffreyDeGraff When I bought my house it was... 02-15-2021, 07:48 AM

Jbotto Today at the Bench..... 02-16-2021, 05:01 AM

JeffreyDeGraff Haven’t been at the bench... 02-21-2021, 04:28 PM

Sgt Greybeard How old is your 32 win spl? ... 02-21-2021, 07:37 PM

JeffreyDeGraff Somewhere between 1943 and... 02-21-2021, 08:28 PM

Jbotto Pulled a scope off my .338-06... 02-21-2021, 07:33 PM

JeffreyDeGraff That sucks!!!! Where are the... 02-21-2021, 08:28 PM

Jbotto The one in the picture can be... 02-21-2021, 08:36 PM

JeffreyDeGraff Good luck brother JTD 02-21-2021, 08:37 PM

muforester Put together a 30-30 test... 02-23-2021, 07:04 AM

JeffreyDeGraff I can’t wait to see how it... 02-23-2021, 10:10 AM

muforester Another 30-30 test load.... 02-23-2021, 08:42 PM

Flyeralan These loads look very good,... 02-24-2021, 02:24 PM

JeffreyDeGraff I second this... 02-24-2021, 03:32 PM

muforester Finally got to shoot these... 03-01-2021, 04:22 PM

Flyeralan So, I'm curious. Is/was the... 03-02-2021, 02:38 AM

muforester I shot a jacketed load that... 03-02-2021, 05:37 AM

Jbotto This gives me hope for when I... 02-24-2021, 12:35 PM

JeffreyDeGraff That’s a great group. My... 02-28-2021, 08:35 AM

Flyeralan JTD, what rifles do you have... 02-28-2021, 08:43 AM

JeffreyDeGraff My original was a Remington... 02-28-2021, 09:53 AM

muforester I put together these test... 03-05-2021, 08:41 AM

muforester Second test load I put... 03-08-2021, 12:30 PM

JeffreyDeGraff Finally got some time behind... 03-14-2021, 06:57 AM

SBSATS Hummm, all I have seen here... 03-16-2021, 01:36 AM

JeffreyDeGraff Today at the Bench..... 03-16-2021, 03:56 AM

muforester Started messing with an... 03-18-2021, 12:27 PM

JeffreyDeGraff Has anybody been up to... 03-28-2021, 04:53 AM

Jbotto Just bought a house. Haha. No... 03-28-2021, 05:03 AM

JeffreyDeGraff You are definitely busy with... 03-28-2021, 06:08 AM

Jbotto Oh yeah! Spent just over a... 04-05-2021, 09:15 AM

Flyeralan I have been spending any free... 03-28-2021, 06:14 AM

JeffreyDeGraff What are you going to plant?... 03-28-2021, 11:27 AM

Flyeralan JTD, keeping it small for the... 03-28-2021, 11:41 AM

JeffreyDeGraff Excellent!!!!! JTD 03-28-2021, 11:55 AM

muforester Finally got to do some... 04-05-2021, 11:16 AM

JeffreyDeGraff Excellent shooting! JTD 04-05-2021, 12:07 PM

muforester Worked on a little 9mm... 04-05-2021, 08:03 PM

JeffreyDeGraff I finally made it to the... 04-09-2021, 07:32 AM

JeffreyDeGraff I finally found some time to... 05-22-2021, 08:52 PM

Jbotto I’m halfway through my move... 05-23-2021, 04:57 AM

JeffreyDeGraff Put up some pictures of your... 05-23-2021, 12:29 PM

Jbotto Oh yeah! I will do that! I... 05-24-2021, 06:05 AM

akpls Finally got around to testing... 05-26-2021, 12:07 PM

JeffreyDeGraff Glad they went well. I had an... 05-26-2021, 03:09 PM

Flyeralan Finally got some time at the... 05-29-2021, 09:32 AM

JeffreyDeGraff That sounds like a nice... 05-30-2021, 06:46 AM

Flyeralan Almost exactly what I do with... 05-30-2021, 07:05 AM

Flyeralan I'd like to find time to see... 05-30-2021, 10:02 AM

JeffreyDeGraff I know that’s right. Ive got... 05-31-2021, 11:33 AM

Harter Not at the bench today but a... 05-29-2021, 07:53 PM

JeffreyDeGraff Very nice JTD 05-29-2021, 08:21 PM

JeffreyDeGraff Ive been doing case prep last... 05-30-2021, 06:52 AM

JeffreyDeGraff W231 is my favorite in 9mm... 05-30-2021, 07:18 AM

JeffreyDeGraff Here’s a few more Ive loaded... 05-31-2021, 11:38 AM

Flyeralan If you don't mind me asking,... 05-31-2021, 02:26 PM

JeffreyDeGraff It’s a Smith Corona 1903A3... 05-31-2021, 05:32 PM

JeffreyDeGraff Ive been on a roll today. All... 05-31-2021, 07:43 PM

Jbotto Had someone local post some... 06-09-2021, 06:11 AM

JeffreyDeGraff Got a few loads done up... 06-24-2021, 05:35 PM

Mauser How do you like that Bob AI?... 06-25-2021, 06:10 AM

JeffreyDeGraff I like it quite a bit. It is... 06-25-2021, 06:19 AM

Mauser Have a 280 AI built on that... 06-25-2021, 06:41 AM

JeffreyDeGraff Today at the Bench..... 06-25-2021, 06:54 AM

Mauser I don't own any 03s, but I'm... 06-25-2021, 09:53 AM

Flyeralan Hey, I have a question. I am... 06-25-2021, 08:51 AM

JeffreyDeGraff I’d be more than willing to... 06-25-2021, 09:06 AM

Flyeralan There is a scope on it, I... 06-25-2021, 09:42 AM

Flyeralan Ok, Internet is really lumpy... 06-25-2021, 10:03 AM

Flyeralan Here are a couple pictures.... 06-25-2021, 10:50 AM

Mauser Looks like an Interarms Mark... 06-25-2021, 11:13 AM

Flyeralan Some years back, she did this... 06-25-2021, 11:33 AM

JeffreyDeGraff Sweet! How many shots does... 06-25-2021, 11:35 AM

JeffreyDeGraff I was thinking mark x also.... 06-25-2021, 11:37 AM

JeffreyDeGraff It’s definitely a commercial... 06-25-2021, 11:30 AM

Flyeralan I have no idea. If I had to... 06-25-2021, 11:42 AM

JeffreyDeGraff Live and learn. Ive learned... 06-25-2021, 11:46 AM

Harter We have a Mk X varminter in... 06-26-2021, 06:04 AM

JeffreyDeGraff I don’t think it’s a problem... 06-26-2021, 09:03 PM

Harter I didn't mean to imply it was... 06-27-2021, 01:34 PM

JeffreyDeGraff Ah ok. Sorry I misunderstood... 06-27-2021, 02:30 PM

Flyeralan Thank you all for your input,... 06-26-2021, 10:37 AM

JeffreyDeGraff I got to the range Saturday... 07-05-2021, 10:48 AM

Flyeralan Wow! What a productive couple... 07-05-2021, 11:29 AM

JeffreyDeGraff Today at the Bench..... 07-05-2021, 11:51 AM

Flyeralan Very nice! That should be an... 07-05-2021, 11:54 AM

JeffreyDeGraff Got a few 45-70 test loads... 07-06-2021, 02:21 PM

JeffreyDeGraff I made up some 7.5x55 and... 07-08-2021, 05:55 PM

JeffreyDeGraff Here’s a new old one that... 07-12-2021, 07:58 PM

muforester I put a few loads together... 07-12-2021, 08:17 PM

Mowgli Terry I had gotten rounds loaded... 07-13-2021, 01:43 AM

Mowgli Terry Double Post 07-13-2021, 01:51 AM

JeffreyDeGraff I have read good things about... 07-13-2021, 11:00 AM

Mowgli Terry The Handi Rifle: The Handi... 07-13-2021, 11:43 AM

JeffreyDeGraff Oh wow. Yeah, the handirifle... 07-13-2021, 06:52 PM

Harter I've been struggling with my... 07-14-2021, 12:42 PM

JeffreyDeGraff That’s very cool. That guy... 07-14-2021, 04:53 PM

Harter I did an initial some of... 07-14-2021, 07:52 PM

JeffreyDeGraff Keep us updated on your... 07-15-2021, 04:05 AM

Harter I will . I have a couple of... 07-17-2021, 11:21 AM

JeffreyDeGraff What obscurities do you have?... 07-17-2021, 05:32 PM

Harter I have a 7.7 to go with the... 07-18-2021, 12:20 PM

JeffreyDeGraff Very cool stuff you have... 07-22-2021, 05:11 PM

JeffreyDeGraff Finally had a moment to sit... 09-04-2021, 10:13 AM

Jbotto Hope everyone is doing well!... 09-04-2021, 10:50 AM

JeffreyDeGraff Good to hear from you Jbotto.... 09-04-2021, 11:00 AM

Jbotto Thanks man! Everyone here... 09-04-2021, 11:14 AM

JeffreyDeGraff That’s going to be nice when... 09-04-2021, 01:11 PM

Jbotto Thanks! I hope so too! Got... 09-12-2021, 07:51 PM

JeffreyDeGraff I prepped a little nickel... 09-12-2021, 08:00 PM

Mowgli Terry In the Loading Room (Skunk... 09-13-2021, 02:38 AM

JeffreyDeGraff You had a busy weekend. I’d... 09-13-2021, 04:09 AM

Mowgli Terry I have been cleaning up this... 09-14-2021, 05:48 AM

JeffreyDeGraff Ha! I totally understand ... 09-14-2021, 05:51 AM

JeffreyDeGraff I got some 30-06 test loads... 09-15-2021, 08:08 PM

Jbotto I hope those shoot as well as... 09-18-2021, 05:25 AM

74man I loaded 300 rds of 40 S&W. 2... 09-19-2021, 07:40 PM

JeffreyDeGraff I got a chance to shoot these... 09-27-2021, 07:56 PM

Jbotto Dang man! I’d love a range... 09-27-2021, 08:57 PM

JeffreyDeGraff Sounds like a busy day. How... 09-19-2021, 07:53 PM

74man He turned 50 this year! I... 09-20-2021, 05:13 AM

Mowgli Terry Got a couple of projects... 09-20-2021, 05:51 AM

JeffreyDeGraff I’m curious as to the results... 09-20-2021, 10:44 AM

Mowgli Terry Update: Sure enough. Not a... 09-20-2021, 04:58 PM

JeffreyDeGraff Very cool. Good luck on your... 09-21-2021, 02:40 AM

Flyeralan My time and attention have... 09-20-2021, 04:42 PM

JeffreyDeGraff I know exactly what you mean!... 09-20-2021, 04:59 PM

Harter Got a dummy made up for the... 09-22-2021, 08:38 AM

muforester Those paper patch bullets are... 09-22-2021, 08:47 AM

JeffreyDeGraff How long does the patch need... 09-22-2021, 08:49 AM

muforester Put these together last... 09-22-2021, 08:51 AM

JeffreyDeGraff You haven’t shot those... 09-22-2021, 08:56 AM

Harter On theses it should cover to... 09-22-2021, 09:25 AM

JeffreyDeGraff Thanks! JTD 09-22-2021, 09:54 AM

JeffreyDeGraff Got some 7x57 loaded up... 09-28-2021, 08:09 PM

muforester Will these be for deer... 09-28-2021, 08:14 PM

JeffreyDeGraff Today at the Bench..... 09-28-2021, 08:15 PM

muforester Put together a few .223 test... 09-28-2021, 08:17 PM

JeffreyDeGraff Those would both make a great... 09-28-2021, 08:18 PM

muforester My R15 will shoot about any... 09-28-2021, 08:28 PM

JeffreyDeGraff I loaded up some (25) 30-06,... 10-01-2021, 05:43 AM

Clopez Those are some beauties right... 10-01-2021, 09:08 AM

JeffreyDeGraff Thanks. I just did some into... 10-01-2021, 09:37 AM

Clopez Wow love the nickel look!! ... 10-01-2021, 12:28 PM

muforester Working on some 300 Blackout... 12-01-2021, 08:29 PM

JeffreyDeGraff Those look awesome! Now to... 12-02-2021, 04:25 AM

muforester I hope they cycle in my AR.... 12-02-2021, 06:26 AM

Mowgli Terry I set up to run some 9mm... 12-02-2021, 01:43 AM

JeffreyDeGraff Did the swc bullets feed in... 12-02-2021, 04:27 AM

Mowgli Terry Did the swc bullets feed in... 12-02-2021, 04:55 AM

JeffreyDeGraff It sure is. Those are... 12-02-2021, 08:49 AM

Harter I had trouble with the... 12-03-2021, 07:30 PM

Mowgli Terry The Lee 358-125-RT works very... 12-05-2021, 06:25 PM

Harter Clean , warm mould . ... 12-05-2021, 07:58 PM

Mowgli Terry Thanks for your help with my... 12-06-2021, 02:24 AM

Harter I suspect that it may just be... 12-06-2021, 11:50 AM

Mowgli Terry I think the problem is with... 12-06-2021, 04:56 PM

muforester Put together a few extra 7-30... 12-06-2021, 08:03 PM

muforester Working on some 22-250 loads... 12-15-2021, 09:51 PM

JeffreyDeGraff Man, I’m jealous that you are... 12-16-2021, 09:25 AM

muforester Now I just need to find time... 12-16-2021, 02:26 PM

JeffreyDeGraff I finally got my Christmas... 12-16-2021, 04:39 PM

muforester I had a great day at the... 12-17-2021, 07:29 PM

muforester Put together a test load for... 01-06-2022, 06:46 AM

JeffreyDeGraff I had a little time this... 01-08-2022, 10:19 AM

JeffreyDeGraff Today at the Bench..... 01-13-2022, 01:47 PM

muforester Put together a few loads for... 01-22-2022, 06:24 PM

Flyeralan The Contender is one I... 01-23-2022, 08:10 AM

muforester 14" Sent from my... 01-23-2022, 08:34 AM

Flyeralan I'd love to hear how it... 01-23-2022, 11:14 AM

More replies below current depth...

Flyeralan Very cool, a fun caliber for... 01-23-2022, 04:46 PM

Mowgli Terry This past week I got back... 01-28-2022, 04:14 AM

JeffreyDeGraff Glad you got some good... 01-28-2022, 04:56 PM

Harter Keep tabs on annual... 01-28-2022, 06:40 AM

JeffreyDeGraff Ive been slow at the bench... 02-07-2022, 02:29 PM

Harter No loading but I cast a few .... 02-07-2022, 03:51 PM

muforester Put together my first test... 03-04-2022, 07:23 AM

JeffreyDeGraff I hope you get to shoot it... 03-04-2022, 08:00 AM

Flyeralan That is one beautiful rifle,... 03-04-2022, 09:22 AM

muforester The 32-40 shot decent. I... 03-31-2022, 08:48 PM

Mowgli Terry I did get the 700 Mountain... 03-05-2022, 11:26 AM

JeffreyDeGraff Rcbs lube is slick,... 03-05-2022, 04:02 PM

Mowgli Terry My Hornady dies are working... 03-06-2022, 03:01 AM

JeffreyDeGraff Ive been away from the bench... 03-28-2022, 07:07 PM

Mowgli Terry Today: We did some work on... 03-28-2022, 07:51 PM

JeffreyDeGraff That sounds like an... 03-28-2022, 07:58 PM

Mowgli Terry A 256 Newton rifle: I don't... 03-29-2022, 03:03 AM

JeffreyDeGraff Sounds like an incredible... 03-29-2022, 05:04 AM

Mowgli Terry I used 100 gr, bullets in my... 03-29-2022, 05:32 AM

Harter I had the impression that the... 03-29-2022, 08:07 AM

Mowgli Terry Sometimes the way rounds got... 03-29-2022, 11:46 AM

JeffreyDeGraff Ive never used the 257... 03-29-2022, 08:26 AM

Mowgli Terry Most of my varminting was... 03-29-2022, 11:59 AM

muforester Shot some test loads in my... 03-31-2022, 08:53 PM

JeffreyDeGraff Finally have done something... 04-04-2022, 04:43 PM

Harter I found this a while back... 04-08-2022, 05:19 AM

JeffreyDeGraff Cool find. JTD 04-08-2022, 03:17 PM

Kevingc76 I did my last 200 9mm xtreams... 04-14-2022, 06:49 PM

JeffreyDeGraff What powder are you using... 04-14-2022, 07:22 PM

Kevingc76 3.8gr of titegroup. It’s a... 04-15-2022, 03:36 AM

JeffreyDeGraff I think 3.8 is what I use for... 04-15-2022, 04:24 AM

JeffreyDeGraff After way too long away from... 04-21-2022, 01:41 PM

Flyeralan Sounds good JTD! I too have... 04-23-2022, 05:31 AM

JeffreyDeGraff What caliber is your savage... 04-24-2022, 05:02 AM

Flyeralan The BR is in 6mmBR, bought it... 04-24-2022, 07:20 AM

More replies below current depth...

muforester Working on test loads for a... 04-25-2022, 07:16 PM

JeffreyDeGraff Looking good! Can’t wait to... 04-25-2022, 07:39 PM

Flyeralan Those are not yet fire... 04-26-2022, 02:03 AM

muforester Correct, they are not fire... 04-26-2022, 05:52 AM

muforester My plan is to deer hunt with... 04-26-2022, 05:55 AM

Flyeralan Mine is a 15" TC Custom Shop... 04-26-2022, 06:12 AM

muforester Mine is a stainless 15"... 04-26-2022, 06:17 AM

Harter A while back I needed a semi... 04-29-2022, 04:36 PM

Flyeralan That, my friend is a... 04-29-2022, 04:42 PM

JeffreyDeGraff Great find! JTD 04-29-2022, 07:29 PM

Mowgli Terry I have a new ProChrono... 04-29-2022, 05:32 PM

JeffreyDeGraff Let us know how they do. My... 04-29-2022, 07:30 PM

JeffreyDeGraff Finally finally finished that... 05-03-2022, 07:12 AM

Harter Oh the joys of the... 05-03-2022, 02:15 PM

JeffreyDeGraff Ive never heard them called a... 05-03-2022, 03:33 PM

Harter I coined that just now . It... 05-04-2022, 01:51 PM

JeffreyDeGraff Out of all my 7x57 brass, the... 05-07-2022, 05:45 AM

Flyeralan This is a great way of doing... 05-07-2022, 07:34 AM

Flyeralan Just as a point to note.... 05-07-2022, 07:36 AM

JeffreyDeGraff Those are the best bench... 05-07-2022, 07:39 AM

Flyeralan A little off the beaten path,... 05-07-2022, 07:51 AM

JeffreyDeGraff I look at all of the 3D... 05-07-2022, 07:59 AM

JeffreyDeGraff Now I just need to settle on... 05-07-2022, 07:37 AM

Flyeralan I will! I have printed so... 05-07-2022, 08:16 AM

JeffreyDeGraff I would totally be the same... 05-07-2022, 08:18 AM

Flyeralan Here is a small sampling of... 05-07-2022, 09:08 AM

JeffreyDeGraff Very cool stuff. I love the... 05-07-2022, 09:19 AM

Flyeralan Cap done, just started the... 05-07-2022, 12:36 PM

JeffreyDeGraff Very cool!!! JTD 05-07-2022, 12:39 PM

Flyeralan Here is the finished product,... 05-08-2022, 03:49 AM

JeffreyDeGraff Today at the Bench..... 05-08-2022, 04:49 AM

JeffreyDeGraff Got my 7 test rounds loaded... 05-08-2022, 06:24 AM

JeffreyDeGraff Let there be 25-06!!! ... 05-13-2022, 06:02 PM

JeffreyDeGraff Today at the Bench..... 05-14-2022, 06:17 AM

Mowgli Terry OK, this afternoon some 270... 05-15-2022, 06:34 PM

JeffreyDeGraff Ive got 2 pounds of 4000MR,... 05-15-2022, 07:00 PM

JeffreyDeGraff I loaded up 8 more 7x57 brass... 05-20-2022, 04:28 AM

Flyeralan Your process seems solid,... 05-20-2022, 10:55 AM

JeffreyDeGraff Today at the Bench..... 05-21-2022, 10:07 AM

Harter I think I have a problem... 05-30-2022, 08:19 AM

JeffreyDeGraff I don’t see a problem JTD 05-30-2022, 08:31 AM

JeffreyDeGraff Today at the Bench..... 06-11-2022, 06:43 AM

Mowgli Terry I realize shooting some of... 06-11-2022, 08:29 AM

Harter I'm not going to push... 06-16-2022, 04:40 PM

JeffreyDeGraff Ive been working on the last... 06-15-2022, 07:03 PM

JeffreyDeGraff I finally used my lee classic... 06-18-2022, 04:27 PM

JeffreyDeGraff Ive been playing with the Lee... 06-26-2022, 06:33 AM

JeffreyDeGraff Today at the Bench..... 07-04-2022, 08:50 AM

JeffreyDeGraff I haven’t got a ton done... 07-22-2022, 04:46 AM

Flyeralan No time at the bench for me... 07-23-2022, 03:50 AM

JeffreyDeGraff I spent a little time at the... 08-03-2022, 07:25 PM

JeffreyDeGraff More and more test loads.... 08-19-2022, 01:43 PM

Flyeralan One thing I have never owned... 08-20-2022, 04:12 AM

JeffreyDeGraff The 284 Winchester won’t... 08-20-2022, 08:18 PM

Harter I got out some of Dad's stuff... 09-06-2022, 07:05 PM

Harter Working on an older press and... 09-13-2022, 01:09 PM

JeffreyDeGraff How’s everybody been? ... 09-15-2022, 07:16 PM

JeffreyDeGraff Ive been getting ready for... 10-05-2022, 04:08 AM

muforester Finally put together a good... 10-25-2022, 07:16 AM

JeffreyDeGraff I hope you hunt with it. I’m... 10-25-2022, 11:12 AM

Harter I finished up the 45 AR , did... 10-25-2022, 10:10 AM

JeffreyDeGraff Where are you at that is... 10-25-2022, 11:15 AM

JeffreyDeGraff Ive got all my hunting ammo... 10-25-2022, 11:18 AM

Harter 1837 Some of the stuff from... 10-25-2022, 12:55 PM

JeffreyDeGraff I can’t make out anything... 10-25-2022, 02:23 PM

Harter Win super , Rem UMC 30... 10-28-2022, 05:02 PM

JeffreyDeGraff Those are cool rounds to have... 10-31-2022, 11:20 AM

Harter I might try that this time .... 11-01-2022, 07:01 PM

JeffreyDeGraff What are you going to load... 11-03-2022, 06:10 PM

Harter 7×57 . Savage 110LH 24"... 11-04-2022, 07:02 AM

JeffreyDeGraff Let me know if you achieve... 11-06-2022, 02:36 PM

Harter 1839 Unique and IMR 4831 . 11-09-2022, 11:45 AM

JeffreyDeGraff Those look awesome. I’ll be... 11-09-2022, 05:05 PM

Harter 1840 First go with a rifle... 11-11-2022, 07:55 PM

JeffreyDeGraff Outstanding! That 4831 load... 11-15-2022, 10:31 AM

Harter Lots of work to do . 3" at... 11-15-2022, 08:50 PM

JeffreyDeGraff But it’s a start. I bet you... 11-17-2022, 02:20 PM

Harter The goal is always a .500... 11-17-2022, 11:28 PM

JeffreyDeGraff I find that I set different... 11-18-2022, 08:28 AM

Harter I wrote 3" at 100 those were... 11-19-2022, 12:07 PM

JeffreyDeGraff Ah! Ok. Now I agree, you’ve... 11-19-2022, 04:31 PM

muforester I havent been on for a while.... 12-02-2022, 03:47 PM

Flyeralan This is my favorite... 12-02-2022, 03:51 PM

Flyeralan Also, the cartridges in the... 12-02-2022, 03:54 PM

muforester Correct, they were not... 12-04-2022, 11:14 AM

JeffreyDeGraff Those look like miniature... 12-03-2022, 07:57 PM

Flyeralan Do you happen to know what... 12-04-2022, 04:00 PM

muforester Not sure what the twist is, I... 12-07-2022, 12:26 PM

Flyeralan I guess I've always... 12-07-2022, 03:25 PM

JeffreyDeGraff During hunting season I don’t... 12-11-2022, 10:10 AM

Harter 6mm the 100 Sierra GK wasn't... 12-11-2022, 03:22 PM

JeffreyDeGraff I feel the same way. Ive... 12-11-2022, 07:53 PM

muforester A new one I have been working... 12-11-2022, 09:33 PM

Harter Very sad day today. I filled... 12-15-2022, 01:47 PM

JeffreyDeGraff 10 pounds of red dot will... 12-15-2022, 06:44 PM

Harter Probably longer than the... 12-16-2022, 08:53 AM

JeffreyDeGraff Agreed. I love red dot in... 12-16-2022, 09:04 AM

Harter It was everything Unique is... 12-16-2022, 01:01 PM

JeffreyDeGraff I shot up the last of my... 01-01-2023, 11:13 AM

Harter 45 AR. 454424 HP , H&G #130... 01-03-2023, 05:40 PM

JeffreyDeGraff That 454424 bullet looks... 01-04-2023, 07:17 AM

muforester Put together my next 7mm... 01-04-2023, 12:01 PM

JeffreyDeGraff I’m rooting for the hot... 01-05-2023, 10:06 AM

muforester Got my last 7mm BR load... 01-10-2023, 04:25 PM

Harter So today I got out the... 01-21-2023, 01:07 PM

JeffreyDeGraff Not much going on here. I... 01-30-2023, 04:34 PM

Flyeralan I've been working at cleaning... 01-30-2023, 04:48 PM

JeffreyDeGraff I love lever action rifles,... 01-30-2023, 08:45 PM

muforester I really enjoy lever actions.... 01-30-2023, 08:49 PM

muforester Worked on some test loads for... 02-01-2023, 08:09 AM

Flyeralan That is quite a variety, lol.... 02-02-2023, 03:50 PM

muforester The bullets are 115gr Lehigh,... 02-03-2023, 11:57 AM

muforester I was finally able to shoot... 02-07-2023, 07:22 AM

muforester I have been on a pistol kick.... 02-03-2023, 11:58 AM

Flyeralan Someone's been busy. I just... 02-03-2023, 12:55 PM

Muddydawg75 Those look so nice 02-04-2023, 02:05 PM

JeffreyDeGraff I’ve been playing around with... 02-07-2023, 06:18 PM

Harter Started ..... restarted a... 02-08-2023, 12:06 PM

JeffreyDeGraff I always love when you post... 02-08-2023, 04:55 PM

Harter Barrel and stock are cut .... 02-09-2023, 10:25 AM

JeffreyDeGraff Sounds like my kinda rifle. ... 02-12-2023, 04:44 PM

Harter Interesting outcome. I got... 02-18-2023, 09:49 AM

JeffreyDeGraff That is really cool! ... 02-18-2023, 03:00 PM

Harter I ran Strelok for the 530s at... 02-18-2023, 05:47 PM

Harter I got out a box of new brass... 02-20-2023, 04:12 PM

JeffreyDeGraff Sounds like a cool old rifle.... 02-20-2023, 07:15 PM

Harter I did a batch circa 98-00' RP... 02-21-2023, 06:42 AM

JeffreyDeGraff Wow! That is a huge... 02-22-2023, 07:34 AM

Harter Air rifle shot and good B... 02-22-2023, 07:21 PM

Harter Yesterday I loaded up 20 each... 03-05-2023, 08:20 PM

JeffreyDeGraff What loads are you trying in... 03-06-2023, 04:30 AM

Harter Unique in the 25s 8-14gr .... 03-09-2023, 07:17 AM

JeffreyDeGraff That’s awesome. Can’t wait to... 03-11-2023, 02:57 PM

JeffreyDeGraff I loaded some tests with two... 03-19-2023, 07:26 PM

Harter I sent a pile of work ups... 04-04-2023, 06:32 PM

JeffreyDeGraff That’s a bunch of shooting! ... 04-04-2023, 07:26 PM

Harter 2 of us shot 6 rifles into... 04-05-2023, 03:31 AM

JeffreyDeGraff Sounds like a very productive... 04-05-2023, 06:12 AM

Harter A fellow on another forum ran... 04-08-2023, 01:26 PM

JeffreyDeGraff That’s great for the 25-06.... 04-08-2023, 02:06 PM

Harter Looks like a retry neck sized... 04-09-2023, 10:26 AM

JeffreyDeGraff Can’t wait to hear the next... 04-11-2023, 12:37 PM

Harter I have another tray of... 05-09-2023, 06:44 PM

JeffreyDeGraff I looked in an old Alliant... 05-10-2023, 02:46 PM

Harter I downloaded "the complete 45... 05-11-2023, 01:13 PM

JeffreyDeGraff The last 4 weeks or so, I... 07-01-2023, 06:50 PM

Flyeralan Yeah, I have got to get back... 07-02-2023, 04:06 AM

JeffreyDeGraff You definitely have had a lot... 07-02-2023, 05:49 AM

Flyeralan Thanks, Jeffery! We got a... 07-02-2023, 05:55 AM

JeffreyDeGraff He will be a lot of fun. That... 07-02-2023, 06:04 AM

Harter I got out to shoot a little... 07-17-2023, 02:24 PM

Harter Went back did a bunch of... 07-24-2023, 09:02 AM

JeffreyDeGraff Man, I’m glad you are getting... 07-29-2023, 12:23 PM

Andyt2 Well I do not post much but... 07-28-2023, 02:16 PM

JeffreyDeGraff What weight zinc bullets do... 07-29-2023, 12:13 PM

Andyt2 I have been casting and... 08-03-2023, 01:05 PM

JeffreyDeGraff That’s pretty cool. So my... 08-03-2023, 01:08 PM

JeffreyDeGraff I haven’t been able to make... 07-29-2023, 12:18 PM

Harter I loaded 19 more with the IMR... 07-30-2023, 01:11 PM

JeffreyDeGraff With the bigger cases, a... 07-30-2023, 01:32 PM

Harter It's tricky. It's the same as... 08-04-2023, 05:52 AM

JeffreyDeGraff That makes sense to me. What... 08-04-2023, 05:58 AM

JeffreyDeGraff Doing a little test. Last... 08-26-2023, 07:57 AM

JeffreyDeGraff Got a few test loads made up... 08-27-2023, 01:11 PM

Flyeralan I shoot a 35 Whelen, those... 08-28-2023, 04:21 PM

JeffreyDeGraff My 35 Whelen is in a... 08-28-2023, 04:54 PM

muforester Been working on a few... 08-31-2023, 04:15 PM

muforester Also working on loads for a... 08-31-2023, 04:21 PM

JeffreyDeGraff I finally got some shooting... 09-17-2023, 12:08 PM

JeffreyDeGraff Have you ever had a day when... 09-22-2023, 04:13 AM

Flyeralan Yup, have had this happen as... 09-23-2023, 02:23 AM

JeffreyDeGraff Amen to that! Sent from... 09-23-2023, 06:21 AM

JeffreyDeGraff Got a little more range time... 10-02-2023, 04:17 AM

JeffreyDeGraff Today at the Bench..... 10-15-2023, 01:25 PM

Flyeralan So after waiting patiently... 10-17-2023, 02:26 AM

JeffreyDeGraff AWESOME!! Is it 44 Magnum? ... 10-17-2023, 09:58 AM

Flyeralan Yep, 44 Magnum. Ruger has... 10-17-2023, 02:16 PM

JeffreyDeGraff Ive heard/read that Ruger is... 10-17-2023, 02:19 PM

Flyeralan Lol! However that is what I... 10-17-2023, 03:06 PM

JeffreyDeGraff Here is some pictures of my... 10-22-2023, 07:04 PM

Flyeralan Now that doesn't look bad at... 10-23-2023, 05:20 PM

JeffreyDeGraff I’ve been sighting in rifles... 10-22-2023, 07:11 PM

JeffreyDeGraff I bet that 2-7 Leupold will... 10-23-2023, 06:00 PM

JeffreyDeGraff I’ve been a busy little... 11-13-2023, 03:33 PM

muforester https://uploads.tapatalk-cdn.c... 11-18-2023, 09:31 PM

JeffreyDeGraff Big Medicine. Sent from... 11-19-2023, 03:05 AM

muforester That Barnes load kicks so... 11-24-2023, 09:10 AM

muforester Working on a new one I am... 11-28-2023, 09:19 PM

JeffreyDeGraff Love it!!! Sent from my... 11-29-2023, 01:26 PM

muforester I like these... 11-30-2023, 07:08 PM

JeffreyDeGraff I’ve been hammering out some... 12-06-2023, 08:55 AM

JeffreyDeGraff Playing around with the 250... 12-10-2023, 04:04 PM

JeffreyDeGraff 6.5x55. 140gr Sierra gameking... 12-12-2023, 07:06 PM

JeffreyDeGraff I got most of everything I’ve... 12-18-2023, 06:26 PM

JeffreyDeGraff I’ve been reloading and... 01-10-2024, 08:14 PM

muforester Here is a few I have been... 01-25-2024, 05:39 PM

Flyeralan Can I ask what firearm you... 01-26-2024, 03:13 PM

muforester 14” Contender Sent from... 01-27-2024, 04:53 PM

Harter One hundred each 45 Colts in... 02-11-2024, 04:20 PM

JeffreyDeGraff Looking good! 10.0gr should... 02-11-2024, 05:16 PM

Harter Speed #12 says 10-11 for... 02-13-2024, 05:14 PM

Harter Did another 200 Colts today .... 02-18-2024, 06:43 PM

JeffreyDeGraff Man, you really mix and match... 02-18-2024, 07:57 PM

muforester A few more I have been... 02-18-2024, 07:12 PM

JeffreyDeGraff Time to go shoot those... 02-18-2024, 07:58 PM

Harter It's a 1917 and has to retain... 02-19-2024, 02:52 AM

Harter 358 Win 360-238 XCB NOE , 20... 03-28-2024, 05:08 PM

Harter I shot all of that up in like... 12-03-2024, 05:21 PM

Harter Loaded 30 7×57 , 6 loads of... 12-23-2024, 04:16 PM

Harter Transfer to small sheets from... 12-30-2024, 05:47 PM

Previous Post

Next Post

11-21-2020, 05:54 AM #11
JeffreyDeGraff

View Profile

View Forum Posts

Private Message
Title
Premium Member

Join Date

Jul 2018

Location

North Texas

Posts

2,367
Originally Posted by muforester

I love those flat point bullets!

Sent from my SAMSUNG-SM-G930A using Tapatalk

So do I! I hope somewhere along the way I can find some more, maybe at a gun show or something.

JTD
Reply With Quote

Quick Navigation General Reloading questions (Reloading 101) Top

« Looking for a Good Time? Connect with Local Ladies in Your Town | .357 Remington Maximum Published Data? »

Similar Threads

What's everyone reloading today?

By Guns4545 in forum General Reloading questions (Reloading 101)

Replies: 19
Last Post: 11-05-2018, 08:14 PM
Not today Bloomberg, you douche.

By Dougthatsit in forum Politics

Replies: 6
Last Post: 10-20-2018, 08:20 AM
Cabelas today Aug 14 :(

By Topkick in forum General Firearms Discussion

Replies: 18
Last Post: 09-08-2018, 10:58 AM
Tried this combo today

By Clopez in forum Rifle Reloading (General)

Replies: 13
Last Post: 09-01-2018, 05:13 AM
found all this today

By denton in forum The Basement (NSFW)

Replies: 10
Last Post: 08-12-2018, 04:23 PM

Posting Permissions

You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
[VIDEO] code is On
HTML code is Off

Options

Site Links

About

Welcome to Sage's Reloading Supply.

Founded in 2014 Sage's Reloading Supply offers quality brass and bullets for all your reloading needs! We are your one stop shop for high quality brass in a multitude of calibers! We pride ourselves on our superb customer service and will show you why we are the best at what we do! Coupled with ultra-fast affordable shipping to anywhere in the United States, you won't shop anywhere else ever again!

Contact Info

sagewa@yahoo.com

All times are GMT -8. The time now is 05:54 AM.
Forum Theme By Technidev

Powered by vBulletin® Version 4.2.5
Copyright © 2025 vBulletin Solutions Inc. All rights reserved.

Show Copyright