I managed to load a few test loads tonight. First I loaded some 7.62x54R. Ive been having some issues with accuracy, big time horizontal stringing with an inch or less of vertical. That kind of stringing, in my experience, is a result of seating depth and/or seating depth. I also noticed that on minimum loads there was no stringing, but with medium to full power loads, things went south. My initial loads were at 2.900” which put only .165” of bullet in the case neck, so I loaded some to 2.765, which is .300” in the neck. I hope this helps.



I also loaded some test loads for 9.3x62 with 285gr PRVI RN Bullets and Big Game powder, and some test loads for 375 Whelen Improved with 300gr PRVI RN Bullets and Big Game powder.




JTD