I got the 32 special, 35 rem, and 30-40 deprimed and squeaky clean. The nickel 6.5 creedmoor is cleaned sized and primed.
I made it to the range today and shot 7x57 with 139 Hornady sp and 120gr nosler fp. 257 Roberts Ackley Improved with 117gr sst. And my k31 7.5x55 with 178gr eldx. I had good results from all three, the 7x57 is shooting MOA with the 139gr sp, the 257 Ackley shot the 117gr sst the best that it ever has today, just want to tinker around with it now and see if I can shrink the groups a little, and the best group out of the K31 was 1.7”, not the best group ever but gives me a good starting point to start messing around with it.
After the range I cleaned sized and trimmed my 7x57 brass, it is in the tumbler now. Will prime it when it comes out and am going to load them up.
JTD
Not a great photo, but left to right.... AR I built with a Wilson barrel, AR I built with a side-charging upper and ER Shaw barrel, a Ruger 77 Compact (my first 204), a Savage 11, and far right is a Mossberg MVP. The side-charger and Mossberg have not yet been fully sighted in and that's what I'm loading up for now. The Ruger and the Wilson barrel AR both like the 40 gr V-Max factory loads.... the AR especially. In fact it shoots those factory loads so well I haven't even tried to work up anything else for it.
Sent from my SM-N986U1 using Tapatalk
I had a chance to add the Remington 700 (consignment at the LGS) to the set, but I waited too long to grab it and someone beat me to it.
Sent from my SM-N986U1 using Tapatalk
Last edited by akpls; 11-28-2020 at 10:36 PM.
Hope you all are doing well! Just checking in! Hunting season ended for me this weekend with a Covid scare and one last hunt Sunday night in the unit I still had a tag for. Oh well. We ended up with three does total for the year, between my wife and I and we had been given a beef for the freezer in September. We are not hurting in any way and truly are blessed this year. Hoping to clean the bench off here in the next few weeks and get some reloading done with what components I do have, but not looking good for awhile. Waiting for my favorite bullets to come back in-stock for the .338-06 and have a feeling that might take awhile. It’ll give me time to work on some tinkering with my .30-06 load for now.
Sent from my iPhone using Tapatalk
Working on breaking down some old reloads that didn't shoot well so I can salvage bullets, brass, and primers. Also, I took apart some old 6.5x55 surplus rounds. Has anyone ever seen powder like this?
Sent from my SAMSUNG-SM-G930A using Tapatalk
I had to pull about 400 pistol rounds because the bullets were undersized. I quickly realized the hammer wasn’t the way to go, so I rigged up a spacer and used some lineman’s pliers and pulled them in a similar fashion.