Donate to Sages

Results 1 to 10 of 16

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Title
    Premium Member
    Join Date
    Nov 2018
    Posts
    13
    What velocity are you getting out of these loads? That will let you know for sure if you have a "weak" load. Low velocity plus a fresh 17lb factory recoil spring can easily lead to stovepipes. I would run your loads across a chrono and start from there. You can either bump up your powder charge or get a lighter weight recoil spring. Lowering your OAL will also increase velocity (and pressure) without increasing your powder charge. 1.16 is a bit on the long side. I would start with the free option and try lowering OAL to 1.10 - 1.13 and that may very well solve your issue.
    Last edited by Ombudsman; 02-21-2020 at 07:06 PM.

Similar Threads

  1. 270 and 25-06 dies needed
    By CKTROTH in forum Reloading equipment for sale by members (Presses, dies, scales, etc ONLY)
    Replies: 2
    Last Post: 01-26-2019, 03:27 PM
  2. 35 Rem Help needed!!!
    By CKTROTH in forum General Reloading questions (Reloading 101)
    Replies: 7
    Last Post: 12-13-2018, 05:11 PM
  3. This is exactly what I needed! Fire in da hole!
    By WVHillbilly in forum Politics
    Replies: 3
    Last Post: 10-17-2018, 02:44 AM
  4. .380 ACP Load info needed
    By Adam Van Camp in forum Pistol Reloading (General)
    Replies: 28
    Last Post: 09-25-2018, 04:58 PM
  5. . 223 light crimp help needed
    By Guns4545 in forum Rifle Reloading (General)
    Replies: 5
    Last Post: 08-21-2018, 06:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •