9mm load help needed

[72Camaro]

Do you have any insight on what spring you had installed incorrectly? I did a p80 G19 build and am also having similar problems stovepiping and not always locking on last round. I am also at the top end of my powder charge for my load.

Sent from my SM-N960U using Tapatalk

From my son-in-law:
Yes that's correct, if you put the top pin in first then the slide release ad its spring in you'll be good to go. If the top pin goes in between the slide stop spring and the slide stop it will cause that malfunction.

[Kingrich09]

From my son-in-law:
Yes that's correct, if you put the top pin in first then the slide release ad its spring in you'll be good to go. If the top pin goes in between the slide stop spring and the slide stop it will cause that malfunction.

Thank you I'll have to take a look at mine when I get home tonight.

Sent from my SM-N960U using Tapatalk