308 RL15 (powder) 150gr Fmjbt using LCLR brass

[JeffreyDeGraff]

With the 165gr sst, LC brass, CCI 200, COAL 2.750”, my sweet spot with RL15 is between 41.0 -41.5gr. Ive tested 41.0 41.3 and 41.5 multiple times and they all three shoot moa and have the same point of impact. So I opted to use 41.3


JTD

[Guns4545]

With the 165gr sst, LC brass, CCI 200, COAL 2.750”, my sweet spot with RL15 is between 41.0 -41.5gr. Ive tested 41.0 41.3 and 41.5 multiple times and they all three shoot moa and have the same point of impact. So I opted to use 41.3


JTD

With my Hornady 150gr Fmjbt should I seat them to 2.700 like 308 or 2.750? In the service 308 the 155gr are 2.800. When I tried varget I used 2.700 at 43gr. Was getting a hair over moa at 100 yards. BTW I use CCI 200 primers as well.

Sent from my SM-N910V using Tapatalk