When you get a brand new gun

[EppicRedneck]

What do you do, when you get a brand new gun? Step by step... I’m just curious about different peoples habits. I have a new gun I’m about to go to town on...


Sent from my iPad using Tapatalk

[Quigley]

Mine usually sit in the safe for a few years before I get to them. I dont typically buy because I want to shoot today. I usually buy based on price. I have a shotgun, an ar, and 2 rifles that are still new. Although I had a custom rifle built a few years back and it came to me ready to shoot. The most recent one came back from the Smith with a new barrel, and bedded stock, I sent out the bolt to have a bolt knob done, and then mounted glass. If I was doing a new rifle out or the box, the number one thing would be a trigger, then the stock, then glass.

Sent from my SM-G955U using Tapatalk

[JeffreyDeGraff]

For a factory, off the shelf rifle, first thing I do is clean the bore. Next i use some form of bore paste/polish. Then I’m ready for the range. I usually load up 20 rounds for my first range session, and shoot 4, 5 shot groups cleaning in between each group. At the end I clean the snot out of it and am ready for test loads.


JTD

[CodySPowell]

I do a quick clean and commence unloading.

Sent from my SM-J727V using Tapatalk

[Big Eddy]

I take it to the range and see how it shoots.

[EppicRedneck]

Thanks guys, I figured cleaning... anybody check screws or anything? I am cleaning and bore-sighting mine tonight.


Sent from my iPad using Tapatalk

[JeffreyDeGraff]

Thanks guys, I figured cleaning... anybody check screws or anything? I am cleaning and bore-sighting mine tonight.


Sent from my iPad using Tapatalk

Yes. Good point. I always check the action screws too.


JTD

[Holland]

I really only clean it, lube it, and (depending on what it is) shoot a box or 2 of factory ammo if I don’t have any reloads ready. Especially with a Polymer80 and you just need something to break it in. I keep some freedom munition ammo around for new 9mms I acquire

[EppicRedneck]

I really only clean it, lube it, and (depending on what it is) shoot a box or 2 of factory ammo if I don’t have any reloads ready. Especially with a Polymer80 and you just need something to break it in. I keep some freedom munition ammo around for new 9mms I acquire

Thanks! I can’t afford the dies now (just transferred kids into a private school much higher priority, wife asked me to wait) so looks like federal will have to do. Hope their ammo is ok for hunting.


Like the neighbors dog, my gun will bark if you aren’t welcome...

[Josh_Putman]

Take it apart, inspect, clean, and lube. Commence the unloading procedure with some factory ammo.

I know some folks just shoot them right out of the box without so much as a drop of fresh oil, but that's just not my style.

Sent from my SM-G970U using Tapatalk