Either/or - - -> case gauge . . dies . . or chamber. It would be extremely unlikely if it were two out of the three of these. --- SAWMAN
Either/or - - -> case gauge . . dies . . or chamber. It would be extremely unlikely if it were two out of the three of these. --- SAWMAN
Why just dance when you can "rock and roll".
STONER 63A ( MK-23/XM-207 )
XM177E2
Agreed.Originally Posted by SAWMAN
To be clear some will chamber and fit in the gauge. I’m leaning toward dies. Tried different lubes.
Sent from my iPhone using Tapatalk
Hopefully the dies will take care of the problem.
JTD
It sounds like the brass is springing back after sizing. I would try sizing once then turning brass 90 degrees and sizing again. It my not help at all but that is what I would try.
Big Eddy
Not big and tall but big and round
What would happen if you took the complete expander ball and primer punch stem out of your resize die. Slightly cam over and give it a try. --- SAWMAN
Why just dance when you can "rock and roll".
STONER 63A ( MK-23/XM-207 )
XM177E2
That’s what I’m doing.
Sent from my iPhone using Tapatalk
Ok fellas. My dad had a set of RCBS dies. I just tried them. They work. The brass slides right in the gauge and finally fit my chamber.
The Hornady Custom Grade resizing die just didn’t work for me in my Rockchucker.
Problem solved.
Here’s a pic of my 6.5 Creedmoor.
CMMG Mk3 PTR2
Sent from my iPhone using Tapatalk
Thanks for the Update buddy!!
Nice looking rifle by the way!!Ok fellas. My dad had a set of RCBS dies. I just tried them. They work. The brass slides right in the gauge and finally fit my chamber.
The Hornady Custom Grade resizing die just didn’t work for me in my Rockchucker.
Problem solved.
Here’s a pic of my 6.5 Creedmoor.
CMMG Mk3 PTR2
Sent from my iPhone using Tapatalk
Awesome! Glad the dies did the trick. What scope is that on your rifle?
JTD
Swarovski. I don’t remember the details off the top of my head. I like it a lot.
Sent from my iPhone using Tapatalk
Posting Permissions
Reply With Quote