Drying brass after wet tumbling?

[PPetersen]

So I searched for this topic already but either I'm not searching correctly or it's not here.

I wet tumble my brass and was wondering how folks are drying their brass after the wet tumble?

Sent from my SM-N960U using Tapatalk

[SGTREED]

I use a food dehydrator 45 min- 1hr and done


Sent from my iPhone using Tapatalk

[JeffreyDeGraff]

I dry my brass in the oven. 200 degrees for an hour.


JTD

[Flyeralan]

Food dehydrator, it works great.

[Big Eddy]

I just let brass sit on a towel, on a table in the reloading room for a day or two until dry.

[Holland]

I’ve had better results sitting on a towel near a fan and a dehumidifier. I used a dehydrator before but it was leaving spots on the brass. I’ve tweaked my ratios for wet tumbling since then but the towel works just as nicely

[Andyt2]

I spin them in a media seperator to get most of the water off the brass. Then put in my rather large toaster oven 180-200 for about 20 mins.

[Garand46]

I use an old food dehydrator.

Sent from my SM-G950U using Tapatalk

[seeker]

I use a food dehydrator also. .45 mins and its ready to go.

[72Camaro]

I use Franklin Arsenal dryer and it just happens to look like the food dehydrators. My daughter sent me a picture of hers and it was almost the same, similar to picture above.