Not sure what size the starline is, don't have any in 357 SIG. I've used it in a few rifle calibers though. If the holes are the small Lapua size, you can probably punch through them, but the easiest thing would be take the pin out, put it in a drill and whittle it down with some sand paper til if fits in the tiny holes just barely. I did that to my LEE as well and if you break a pin after you've done that, then something is wrong somewhere besides the pin. I've decapped thousands of rounds of crimped primers with it and no issue at all. Just changed over to the MA die since I use it on a separate set up now. Still use the LEE on my turret set up for brass prep.
"Do I reload to shoot more, or do I shoot to reload more?" 30-378 Weatherby, .300 RUM, 7mm Rem Mag, 6.5 Creedmoor, .223/5.56, .375 H&H, .40 S&W, 10mm, .357 SIG
Is this the correct MA for small lapua size flash holes? I want to get one for my Lee singe stage. https://www.mightyarmory.com/collect...12346027802702
Sent from my SM-N910V using Tapatalk
That is the correct one. Very good unit, tough as it gets.
"Do I reload to shoot more, or do I shoot to reload more?" 30-378 Weatherby, .300 RUM, 7mm Rem Mag, 6.5 Creedmoor, .223/5.56, .375 H&H, .40 S&W, 10mm, .357 SIG
Hi Bob looks like they are out of stock. Here is the new link for you. Definitely recommend getting one they work excellent for 357 Sig with lapua size flash holes.
https://www.mightyarmory.com/collect...or-all-presses
Sent from my SM-N910V using Tapatalk