45 Colt T/C

[smithjs]

I'm wanting to load some 250gr XTP with H110 in 45 Colt T/C. I have a Raging Judge Magnum 45/454/410. It doesn't specifically say for T/C loads, but it's proofed between 87500-93500 PSI. Pretty sure T/C loads will be fine from it, but just wanted to make sure there was nothing I'm missing.

Sent from my SM-N960U using Tapatalk

[EUDE75]

If its made for the 454 as well I wouldn't worry and load it on up.

Sent from my XT1650 using Tapatalk

[smithjs]

That's what I figured. Even the T/C loads dont really approach 454 pressures.

Sent from my SM-N960U using Tapatalk

[JeffreyDeGraff]

You are good to go.


JTD

[EUDE75]

Exactly. I load from the t/c part of my manual for my 45 blackhawk.

Sent from my XT1650 using Tapatalk

[SAWMAN]

I owned a 6" Taurus 454Casul for some years. I shot many 335gr and 360gr loads out of it that was right up near 60K psi. All loads used H110 also.
Never a problem. --- SAWMAN

[smithjs]

Thanks guys. I loaded 45 Colt (T/C) 250gr XTP over 26.0gr H110 and CCI350 primers. As a bonus, the box of bullets had an extra.

Sent from my SM-N960U using Tapatalk