Been busy with 9mm, .233 and 7.62x39.
It's time to load one of my favorite rounds for my Model 66 Combat Magnum.
Sent from my SM-J727V using Tapatalk
Been busy with 9mm, .233 and 7.62x39.
It's time to load one of my favorite rounds for my Model 66 Combat Magnum.
Sent from my SM-J727V using Tapatalk
Always refreshing to take a newly reloaded round of .357 off the press! It’s the one round I’ve reloaded the most of. All on a single stage, most of mine have been 158gr Missouri Bullet Co LSWC and either Unique or Universal.
Sent from my iPhone using Tapatalk
This thread could not have been posted at a better time. I just purchased a 357 this weekend. Took it out and man was it a blast to shoot (no pun intended)! I'm about to order some plated 158g bullets from Sage's site. Do you have a recommended powder or starting load? I am new to the 357 game. I will also be grabbing some 125g plated for loading in 38 special for it. The rounds are for paper target shooting.
I tend to use a lot of Win231/HP38 or Bullseye for my plinking/target loads. For more full power, then the AA powders come out, or BE-86 or something else.
disciplejourney.com
Great cartridge. I load & shoot far more 38 Special loads through my ancient Model 19, but now and again some Full Fury 357 magnum loads manage to sneak into the cylinder!
I've had this one a couple of decades, and bought it used, in bad shape. The pitting on the cylinder was bad enough that it couldn't be nicely re-blued, so I had it Cerakoted. Great little gun, I carry it often when fishing, hiking or mountain biking. Then it's loaded with magnums! Pinned and recessed. Nice old gun.
Meanwhile, mostly it gets a steady diet of pretty light 38 Special/158 gr lead handloads.
Regards, Guy
Last edited by Guy; 11-26-2018 at 06:14 PM.
A few years ago I ran some 158 gr JHP Remington 357 mag factory loads across my chronograph... From the 2.5" barrel they clocked 1250 fps! I was surprised & pleased.
Most of my 38 practice ammo is in the 700 - 800 fps range. Usually either Bullseye or Unique.
Last edited by Guy; 11-26-2018 at 06:19 PM.