Lighting for my safe

[Dane crawford]

I recently purchased a Cannon 40 gun and its a dark spot so im looking for recommendations on a lighting kit if i have to drill a hole i will thanks in advance

Sent from my SM-S320VL using Tapatalk

[2wheelDuke]

I was reluctant to drill any holes, so I have a cheap battery LED that sticks up with a magnet. Just remember to turn it off before you shut the door.

[Dane crawford]

I was reluctant to drill any holes, so I have a cheap battery LED that sticks up with a magnet. Just remember to turn it off before you shut the door.

I looked at them on amazon does work well

Sent from my SM-S320VL using Tapatalk

[Dane crawford]

I looked at them on amazon does work well

Sent from my SM-S320VL using Tapatalk

I purchased the tourchstar 6 strip led with motion sensor works great

Sent from my SM-S320VL using Tapatalk

[GraySkull]

I'm with NOT drilling any holes and going with battery powered LED lights. There are even some that turn on with a end switch or motion.

[Dane crawford]

I'm with NOT drilling any holes and going with battery powered LED lights. There are even some that turn on with a end switch or motion.

The safe had a hole punched in the center lower back wall i drilled the smallest hole necessary through the fire board then one i ran the wire through i filled it with extreme temp silicon

Sent from my SM-S320VL using Tapatalk