QuickLOAD users

[Flyeralan]

Jay, thanks so much for running this. I don't know if I'll ever have the nerve to try, but I now have more information than I had before. My hope has been to acquire a Ruger convertible 45 Colt/45ACP gun and try it out in that first. We shall see.

[Jay Andrew]

I think a revolver would be a fine choice for this load. You won’t have the potential feeding issues a snubby load like this could have in say a 1911.

That and you can work up the load without worrying about trying to get the gun to cycle. You’ll want to be careful about squibs, but that’s always a concern.


Reloading...it’s like knitting for men.

[BradyT88]

Jay, thanks so much for running this. I don't know if I'll ever have the nerve to try, but I now have more information than I had before. My hope has been to acquire a Ruger convertible 45 Colt/45ACP gun and try it out in that first. We shall see.

You might look at the Lehigh Defense website. They sell some solid copper 120gr bullets for 45 ACP. You will want to analyze it carefully since it could be an apples to oranges since copper bullets are typically longer, but since theirs are flat points and yours are deep hollow points and 5 gr heavier, it could be useable data.

Sent from my SM-G965U using Tapatalk

[Jay Andrew]

The thing that can get you into trouble with monolithic is the higher engraving force. Yes the shank is typically longer for a given weight but the material hardness is what can get you in trouble.

QuickLOAD compensates for this using offsets for different types of bullet construction.


Reloading...it’s like knitting for men.

[BradyT88]

The thing that can get you into trouble with monolithic is the higher engraving force. Yes the shank is typically longer for a given weight but the material hardness is what can get you in trouble.

QuickLOAD compensates for this using offsets for different types of bullet construction.


Reloading...it’s like knitting for men.

Yeah. Luckily in this case that isn't an issue I don't think. The only powders that line up between the 2 are Power Pistol. QuickLoad is running 11.2 gr max. Lehigh Defense is running 10.2 gr Max and 10.7 gr max for +P.

[SGTREED]

Did it ordered so I can add to my toolbox


Sent from my iPhone using Tapatalk

[BradyT88]

I've got another odd one for you... I picked up some solid copper 185 gr bullets meant for a 50 GI, but I want to load them in my 500 Auto and possibly my 500 S&W revolver. I put a few of them on my scale and they actually weighed 180.0 gr +/- 0.1.

Cartridge: 500 S&W
Weight: 180gr
COAL: 1.975"
Bullet Length: 0.601"
Bullet Diameter: 0.500"
Barrel Length: 18" for the AR10 and 6.5" for the Revolver
60805333_337033463652000_3408641906173804544_n.jpg

61064114_326833724665504_8174159020190334976_n.jpg

61375703_2287857781267494_7716502530787639296_n.jpg

[themazmanmechanic]

Is your offer to run quickload still standing?


Sent from my iPhone using Tapatalk

[Jay Andrew]

Yes sir, whatcha got?


Sent from my iPhone using Tapatalk

[Jay Andrew]

I've got another odd one for you... I picked up some solid copper 185 gr bullets meant for a 50 GI, but I want to load them in my 500 Auto and possibly my 500 S&W revolver. I put a few of them on my scale and they actually weighed 180.0 gr +/- 0.1.

Cartridge: 500 S&W
Weight: 180gr
COAL: 1.975"
Bullet Length: 0.601"
Bullet Diameter: 0.500"
Barrel Length: 18" for the AR10 and 6.5" for the Revolver
60805333_337033463652000_3408641906173804544_n.jpg

61064114_326833724665504_8174159020190334976_n.jpg

61375703_2287857781267494_7716502530787639296_n.jpg

I apologize, I missed this post. Sometime Tapatalk doesn’t notify me when people post on threads that I am subscribed to. I’ll run this and post the results shortly

In the future if I don’t respond in a day, PM me and give me heads up.


Sent from my iPhone using Tapatalk