That has been my understanding as well.
Reloading...it’s like knitting for men.
That has been my understanding as well.
Reloading...it’s like knitting for men.
I have a bunch of these 125gr 45's with huge hollow points. I have been unable to find any load data and would love to use them up for plinking with my ACP's. Any chance of a load with that light of a bullet that would cycle an auto? Any chance of QuickLOAD providing any data? Thanks in advance for any input.
125gr 45 hp.jpg
Those look like fun. I've got a 155gr Cast bullet mold that I love for my 45 ACP target loads.
I'm having a hard time finding a bullet that light in .451 or .452 cal in QuickLOAD if you can provide the following measurements I can get something modeled.
Capture.PNG
Also, these look like lead bullets. I just want to confirm they are lead and not moly coated jacketed bullets.
Last edited by Flyeralan; 01-29-2019 at 06:07 PM.
Oops, I should have explained that better.
The measurement you want to grab is the length of the shank. The shank is the full diameter section of the bullet directly behind the ogive. This can be a hard measurement to accurately get with calipers alone (use mic to mark the transition), but if you can get it to within .010 then that will be close enough. Then I'll need your intended COAL. Between the shank length, bullet length, and COAL the rest of the values are calculated.
Jay, the shank measures 0.215 and my guess at COAL would be 1.090. The thing would end up looking much like this, lol.
125gr 45 hp.1.jpg
Last edited by Flyeralan; 01-29-2019 at 06:26 PM.
Ok so finally got my questions answered I will be getting quick load ordered this weekend woohoo
Sent from my iPhone using Tapatalk
Rub some dirt on it and get back in the fight
Congrats Dude! Your powder data base will be more up to date then mine. I need to order the update CD...
Here's the results on the 45 ACP load with the 125gr bullets. I think the real trick with that load will be to keep the bullets from changing COAL under recoil or chambering.
Results are for a 5in barrel, SAAMI MAP for the 45 ACP is 21,000psi.
Capture.PNG