30-06 powder recommendations

[ReneeMicelli]

On a whim I looked up load data for H335 since I have a bunch on hand and loaded up a few.51.0 grains behind a 165 grain Nosler Accubond has been my load for the past two seasons.

15178938_1789425527997790_2702846533891602596_n.jpg23735971_1959230574350617_7717414509430430384_o.jpg23783407_1959349721005369_8934567789756135707_o.jpg

No tracking involved with any of the three

[Clopez]

That’s proof there can be more than one good powder. Nice work. Not one I’d have thought of using.


Sent from my iPhone using Tapatalk

[Guns4545]

On a whim I looked up load data for H335 since I have a bunch on hand and loaded up a few.51.0 grains behind a 165 grain Nosler Accubond has been my load for the past two seasons.

15178938_1789425527997790_2702846533891602596_n.jpg23735971_1959230574350617_7717414509430430384_o.jpg23783407_1959349721005369_8934567789756135707_o.jpg

No tracking involved with any of the three

Nice. Thanks[emoji106][emoji41]

Sent from my SM-N910V using Tapatalk

[ReneeMicelli]

That’s proof there can be more than one good powder. Nice work. Not one I’d have thought of using.


Sent from my iPhone using Tapatalk

Normally I would not either,but sometimes I go to the Hodgdon site and loo at some out of the ordinary combos just to see what might be possible.

[JeffreyDeGraff]

I use RL22 with 220gr partitions. And imr4831 with 165gr hornady btsp.


Sent from my iPhone using Tapatalk

[reactorpwr]

H335, it is my go to powder for most rifles, including 30-06.


Sent from my iPhone using Tapatalk

[Dusojr]

I shoot the enduron line 4451


Sent from my iPhone using Tapatalk

[300WSMGUY]

3031.... It's all I use for -06

I used IMR4064 for years with good results.


Sent from my XT1254 using Tapatalk