Donate to Sages

Results 1 to 10 of 23

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Sublime1's Avatar
    Title
    Premium Member
    Join Date
    Jul 2018
    Posts
    17
    I once managed to cross thread the collet nut on my 223 die, which left the pin off center just enough to shave thin stripes into the cases.

    Sent from my LGMP450 using Tapatalk
    Going broke one caliber at a time.

  2. #2
    sagela's Avatar
    Title
    Moderator
    Join Date
    Jul 2018
    Posts
    127
    I've charged cases with no primer - and installed primers upside-down.
    I've core-sectioned a finger that was in the wrong place - wrong time.
    I've drilled my finger with the decapping pin.
    I've failed to lube a rifle case b4 resizing. (Stuck case remover practise.)
    I've seated bullets in uncharged cases - ("Check the BORE!" practise.)
    I've used powder that stunk - ("Check the BORE!" practise.)
    I've run the charged case up into the LEE Factory Crimp die before seating the bullet. (LEE Turret press makes this easy.)



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •