I know lots of people like to shoot coated lead bullets, I started coating my own bullets a few years ago an once I got my process figured out I can coat an cure a couple hundred bullets and hour on a lazy weekend afternoon.


This is how I do it.


Tools:


Convention toaster oven for curing your bullets.


I prefer the convection oven because it heats more evenly. You can pick one up at a resale store on the cheap or just buy a new one for around $30 to $40 depending on what you like. ONLY use the oven for curing powder coated bullets or heat treating bullets from that point on NEVER use it to cook food in afterwards. If the oven is not digital and controlled by an internal PID get yourself an oven baking thermometer (WallyWorld for $7) to set your temperature dial as close as possible, most toaster ovens heat much hotter than the dial indicates. Set your oven to keep a constant temperature at around 400 degrees, if the temp runs +/- 25 degrees it wants hurt anything you just don't want it to get to high or to cool.



Plastic container for tumbling bullets in.


You will need one or more #5 plastic containers and lids depending on if you want to do more than one color, screw on types are the best but snap on lid types like I use work fine to. I use these two types of #5 container I recycle from home along with multi color plastic pony beads I get at WallyWorld for $1.50 per pack, they are large enough that they want get stuck in my big 45 ACP HP's. The combination has worked well for me to generate lots of static electricity to attract the powder to the bullets. One thing of note is that LOW HUMIDITY is your friend as it will make generating static electricity easy, I like it to be 40% or lower. At times, I've had to coat my bullets in the house and take them out to my reloading shed to cure.


#5 container from local restaurants.



Great Value Yogurt container.

Pony Beads.