358 Win 360-238 XCB NOE , 20 rounds 8.5 Unique for fire form FC 308 .
257 Roberts 257412 10 Unique 20 something to shoot.
275 Rigby 7mm 168 RCBS 8&8.5 Unique and 41&41.5 DuPont 4350.
25-06'...
Type: Posts; User: Harter
358 Win 360-238 XCB NOE , 20 rounds 8.5 Unique for fire form FC 308 .
257 Roberts 257412 10 Unique 20 something to shoot.
275 Rigby 7mm 168 RCBS 8&8.5 Unique and 41&41.5 DuPont 4350.
25-06'...
RP LRP brass
Win LRP
IMR 4350
Sierra Match King HPBT 180 gr .
1885
The rifle .
41';Tirni Carcano
Montana Rifleman 20" 1-8.5" target crown .
A long story shortened to I needed a cartridge rim to fit a bolt face then fitted a caliber barrel .
6.8 data works fine up to 130 gr but I want use the whole of the available twist . Not a...
It's a 1917 and has to retain the case mouth head space with a .453 maximum dia cast bullets .
The 45 mag dies came up dirt cheap compared to the Colts dies I looked up yesterday........ $75 !?! I...
Did another 200 Colts today . Star Line brass.
I have a 45 ACP reamed 45 S&W with an ACP Reamer . It seems the 45 Win Mag is just the right length dies for the taper crimp and evev the steel sizer...
Speed #12 says 10-11 for their 260gr jhp soni could probably go on up to 11.5:with the 252 gr cast .
One hundred each 45 Colts in 1x Armscore Precision brass . The fine NOE 454-250 SWC version of the Kieth 454424 Lyman from WW-pure at 50-50 . The lube is the left overs in the new to me lubeizer...
Can't get the followers there to drop in here .
I check at least every other day ,I try to make it twice a day . I don't post much because I don't get to shoot as much as I'd like .
Most of what I do load is finished and fixed data in known loads...
100 fps is factory data for a case step in caliber with like pressure........
It's also why up to 165 gr the 308 is in a dead heat with the 06' .......
It takes roughly 5,000 psi or 5 gr of most...
Yeah I made contact .
Long out of production now 100 round 410 trays.
They may have been this one has some 45 Colts in the back half .
That would make sense if it were for 100 each 410s ,you could 200 in a 30 cal can , probably even 3" .
Honestly I never even gave it...
I found these for sale about 10 years ago and just assumed they'd been available since the 1970s they'd be around a while longer.
1882
Loading and 30 cal can trays.
I need a tray about .750...
Mom handed me a box and says "the rust is bad , I didn't know the 97' was still in the box .
Like all things there's more to the story. Circa 1960-62' when 97' Winchesters were still cheap and...
The 1-10" 30 cal will stabilize almost every bullet under 1.2 inches in length . Copper Monolith bullets up to 190 gr should be ok 210 gr cup and core spire points and 220 spritzers used to be the...
I've been inspired to address case sizing.
The inspiration come from "all of the top Bench Rest guys FL size every time" . Well they probably do , but they also have a FL sizer , dedicated shell...
I have access to 6"Sec 6 and a 5-5/8 3 screw OM BlackHawk. I loaded some 170 HC Speer over 14.5 H110 from the rifle data section of the Lyman book . They're fantastic in the 18" 1894 C . I think that...
The question is how many times can brass be loaded ?
The answer is....
I've had 06' split necks on the 2 firing from factory, of course I have a couple lots with 20+ loads .
I've had another...
The 3rd wave of the pandemic to end us all has been set in motion with threats of masking up . So race bait/occupy/unjust justice riots can't be far away .
I was fortunate enough to be able to...
X39 is all I dabbled in . I did run a 200 gr paper patch over IMR 4350 1600 fps at mag length and 1700 single fed .
I don't remember what I had under the 155s , probably H322 or Reloader 10x ....
I have received my 2nd one . It was advertised as "needing rehab with , .285 H& I and nose punch" , for $25 and freight a guy can't get hurt , an H&I is that much .
It looked classic unused in a...
It's tricky. It's the same as the deal with the Barnes X and GMX etc . You kind of have to start with the fastest powder that will give a full or near full case for a bullet weight in-between and...
I loaded 19 more with the IMR 4831 , there's only about 1.5 lbs left but the change over to H4831 should be painless , 41.0-41.9 in .3 steps if I see "the pattern" I'll go on up next time from...
Went back did a bunch of measuring after neck sizing in a 6.5-257 AI die with a the .257 expander in it . I took all 19 survivors down to a uniform 2.485 . I was surprised to see 10 so long and only...
I got out to shoot a little yesterday. The 57' M70 I had taken completely down to to clean up 30+ yr in the field and a scope change shot well . Just a few old Cramer , Pope designed 150 gr cast...