Download our Android App!
Sage's Android App
Download our Apple App!
Sage's Apple App

Donate to Sages

      
Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1

    Title
    Premium Member
    Join Date
    Jul 2018
    Posts
    40

    3D Printed Items and design work!

    Group, I have been 3D printing and designing several reloading items to help me with reloading.

    Items pictured below are for sale. I am going to set up a Google pay for sale or you can buy a roll of PLA in the color you wish your items to be in from Amazon and send it to me.


    Thanks Scott

    Similar Threads:
    Attached Images Attached Images
    • File Type: jpg 1.jpg (86.1 KB, 270 views)
    • File Type: jpg 2.jpg (87.1 KB, 138 views)
    • File Type: jpg 3.jpg (90.4 KB, 132 views)
    • File Type: jpg 4.jpg (75.1 KB, 133 views)
    • File Type: jpg 5.jpg (101.5 KB, 127 views)
    Last edited by golfer8866; 10-22-2019 at 04:20 PM.

  2. #2

    Title
    Premium Member
    Join Date
    Jul 2018
    Posts
    40
    Here are the other items. 7.jpg8.jpg9.jpg10.jpg


  3. #3

    Title
    Premium Member
    Join Date
    Jul 2018
    Posts
    40
    Reloading blocks will be $15 without shipping. 3.jpg


  4. #4

    Title
    Premium Member
    Join Date
    Jul 2018
    Posts
    40
    I have several blocks, all same price. I can put the caliber in the front as well as common colors are available. $15 without shipping6.jpg5.jpg


  5. #5

    Title
    Premium Member
    Join Date
    Jul 2018
    Posts
    40
    I can also print out blocks with more than 100 spots, but limited to a 8" x 8" print area. These are $15, shipping extra. 1.jpg


  6. #6

    Title
    Premium Member
    Join Date
    Jul 2018
    Posts
    40
    Powder spoons are $5 shipping is extra. If you buy 3 or more blocks, I will toss in one free of charge. 2.jpg
    These are nice for those with bigger hands, its easier to grab the handle without knocking over.


  7. #7

    Title
    Premium Member
    Join Date
    Jul 2018
    Posts
    40
    Catch bins are $15 shipping extra. I made these after I got tired of emptying the small ones I had from Hornady. I have a large one as well that I need to get a picture of. 7.jpg
    There is 2 holes for screws to mount to your bench if you want.


  8. #8

    Title
    Premium Member
    Join Date
    Jul 2018
    Posts
    40
    I also print a shell drop system for AP presses. This will be $80 shipping extra. I do not provide the long tubes or fancy mounting wood. I am working on a better solution for the mounting. The one shown is set up for 308 or 6.5 Creedmoor. The are adjustable to what every caliber you would like. I am also working on a better spacing solution to the 3 screws you see in the picture. The screens would stay, but I am working on a design to have caliber specific blocks to put in for spacers instead of trying to figure out what is the correct spacing with the screws and nuts on the bottom. These have a much longer lead time.





  9. #9

    Title
    Premium Member
    Join Date
    Jul 2018
    Posts
    67
    I am interested in the bullet feeder set up you have on the press. Can you message about the cost and caliber set up for that particular item.


  10. #10

    Title
    Premium Member
    Join Date
    Jul 2018
    Posts
    40
    Lee sent you a message.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •