Download our Android App!
Sage's Android App
Download our Apple App!
Sage's Apple App

Donate to Sages

Page 3 of 3 FirstFirst 123
Results 21 to 27 of 27

Thread: 7.62x54r sizing

  1. #21
    JeffreyDeGraff's Avatar
    Title
    Premium Member
    Join Date
    Jul 2018
    Location
    North Texas
    Posts
    2,367
    I use an RCBS 2die set with Lee factory crimp die. The rcbs comes with a smaller (for .308) and larger ( for .311-.312) expander balls. I recently did a test loading .311 bullets in brass sized for 308 and brass sized for .311. Same powder charges and seating depth, long story short, they both shot the same. Same point of impact same group size. My rifle does shoot better with a light crimp though.


    JTD

  2. #22

    Title
    Premium Member
    Join Date
    Sep 2018
    Posts
    51
    Quote Originally Posted by JeffreyDeGraff View Post
    I use an RCBS 2die set with Lee factory crimp die. The rcbs comes with a smaller (for .308) and larger ( for .311-.312) expander balls. I recently did a test loading .311 bullets in brass sized for 308 and brass sized for .311. Same powder charges and seating depth, long story short, they both shot the same. Same point of impact same group size. My rifle does shoot better with a light crimp though.


    JTD
    Interesting info. I will keep it in mind when I'm ready to load up some new ladder loads. My expanders won't arrive until Monday. I will experiment with crimping as well.

    Sent from my SM-G950U using Tapatalk

  3. #23

    Title
    Premium Member
    Join Date
    Sep 2018
    Posts
    51
    A few weeks ago, I loaded up some Speer .311" 150gr sp spitzer flat base bullets (#2217) that I got from Wes a while back. I seated them at 2.840" col, going off of Hornady data. H4895 at 40, 41, 42, 43, and 44.0 grains. These cases were sized previously with a .308 expander in Lee Pacesetter dies, by bumping the shoulder back a few thousandths. As the photos show, the lighter charges seemed to be more accurate and closer to elevation zero on the M39 as well. Heavier powder charges put the poi 6 to 8 inches below the poa. Not wanting to replace or modify my front sight, I will probably play around between 40 and 41 grains. A charge of 39.7gr can propel a Hornady bullet at 2,400 fps, plenty enough for a whitetail deer. I don't need velocity as most shots are below 120 yards. The 2" orange target circles weren't easy to see at 100 yards today. 20200912_235751.jpg20200912_235631.jpg20200912_235641.jpg20200912_235650.jpg20200912_235700.jpg

    Sent from my SM-G950U using Tapatalk

  4. #24
    JeffreyDeGraff's Avatar
    Title
    Premium Member
    Join Date
    Jul 2018
    Location
    North Texas
    Posts
    2,367
    That 40.0gr load has perfect elevation, and shoots well too. I seat that bullet at 2.900”. Did you crimp these test loads? Ive got some good groups with H4895, I’m trying out IMR4320 next. Sorry for all the jumbled random thoughts.


    JTD

  5. #25

    Title
    Premium Member
    Join Date
    Sep 2018
    Posts
    51
    Thoughts are good! I may try 2.900" next time around. I didn't crimp these. May try a light crimp next time as well. Minus the 1 flyer, it's a 1.5" group, good enough for deer hunting.

    Sent from my SM-G950U using Tapatalk

  6. #26
    JeffreyDeGraff's Avatar
    Title
    Premium Member
    Join Date
    Jul 2018
    Location
    North Texas
    Posts
    2,367
    My rifle shoots better with a light crimp, that why I was asking. 1.5” is plenty good enough. Keep me updated with any progress.


    JTD

  7. #27

    Title
    Premium Member
    Join Date
    Sep 2018
    Posts
    51
    Will do. I just seated these to spec today and was running out of daylight to try a crimp. Thanks for all your help!

    Sent from my SM-G950U using Tapatalk

Similar Threads

  1. Neck sizing ?
    By Casey F in forum Rifle Reloading (General)
    Replies: 12
    Last Post: 10-31-2018, 07:00 AM
  2. 30-06 sized, primed, prepped, cleaned, for trade. For 7.62 NATO, 7.62x39, 7.62x54r
    By JRCFTR in forum Reloading Components for sale by Members(Approved posts only)
    Replies: 1
    Last Post: 09-27-2018, 07:40 PM
  3. Full Length Sizing vs. Neck Sizing
    By BadPiggy in forum Rifle Reloading (General)
    Replies: 4
    Last Post: 08-20-2018, 08:43 AM
  4. SB 223 Sizing die
    By R2nailer in forum Wanted to Buy (Approved Posts Only)
    Replies: 6
    Last Post: 08-08-2018, 07:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •