Download our Android App!
Sage's Android App
Download our Apple App!
Sage's Apple App

Donate to Sages

Page 1 of 2 12 LastLast
Results 1 to 10 of 20
  1. #1

    Title
    Premium Member
    Join Date
    Aug 2018
    Location
    North Central ND
    Posts
    146

    Winchester model 70 243

    I inherited a Winchester model 70 from my grandfather after he passed away. My wife has taken to it and claimed it as her new deer gun. I have chosen the 95 gr nosler ballistic tip as my deer bullet in that caliber. Yesterday I loaded up loads with two different powders H4350 and H4831. None of the groups impressed me. It’s got a 3-9 leupold on it from the 80’s so the glass was against me. Did I miss something on the powder combo or is working on the gun(bedding,new scope) my next option? I’ll also toss out that it was 100° yesterday and the barrel heat and mirage was not in my favor


    Sent from my iPhone using Tapatalk

  2. #2
    JeffreyDeGraff's Avatar
    Title
    Premium Member
    Join Date
    Jul 2018
    Location
    North Texas
    Posts
    2,367
    Those two powders are solid choices for 243 with 95gr bullets. If the scope is clear there shouldn’t be an issue with it (unless there is internal damage you can’t see). Shooting groups with a bunch of mirage is tricky to say the least. I would make sure the action screws and scope mounts are tight, and retest those loads in the early morning before temps get bad. On another note, that being an older rifle, the barrel is probably not free floated which could cause you shots to wander as the barrel heats up.


    JTD

  3. #3
    SAWMAN's Avatar
    Title
    Premium Member
    Join Date
    Sep 2018
    Location
    Cantonment,Fla.
    Posts
    580
    Do you have any of the lighter bullets in .243" ?? Perhaps a 85gr.
    Any NosParts or Barnes solid copper design.
    Will she be shooting long range whitetails only ?? Any antelope?? --- SAWMAN
    Why just dance when you can "rock and roll".
    STONER 63A ( MK-23/XM-207 )
    XM177E2

  4. #4

    Title
    Premium Member
    Join Date
    Aug 2018
    Location
    North Central ND
    Posts
    146
    Quote Originally Posted by JeffreyDeGraff View Post
    Those two powders are solid choices for 243 with 95gr bullets. If the scope is clear there shouldn’t be an issue with it (unless there is internal damage you can’t see). Shooting groups with a bunch of mirage is tricky to say the least. I would make sure the action screws and scope mounts are tight, and retest those loads in the early morning before temps get bad. On another note, that being an older rifle, the barrel is probably not free floated which could cause you shots to wander as the barrel heats up.


    JTD
    I did go through the rifle and checked screws and what not, everything looked good. To be honest I bet this rifle hadn’t had a box of shells through it before I got it. He ordered a 223, 243 and a 270 all matching model 70 feather weights. He only hunted with the 270. I will retest though. Thanks for the reply.


    Sent from my iPhone using Tapatalk

  5. #5

    Title
    Premium Member
    Join Date
    Aug 2018
    Location
    North Central ND
    Posts
    146
    Quote Originally Posted by SAWMAN View Post
    Do you have any of the lighter bullets in .243" ?? Perhaps a 85gr.
    Any NosParts or Barnes solid copper design.
    Will she be shooting long range whitetails only ?? Any antelope?? --- SAWMAN
    Well we live in northern ND and sometimes the shots can get pretty far. She shoots very often and is pretty humble about her capabilities if you know what I mean. We applied for the speed goats so we’ll see if she gets a tag. I’m kinda stuck on this bullet though. I’ll give it another go when it’s not so hot out. I did measure the chamber am realized the bullet was making a huge jump so I can fix that too. All the groups were 1.2-1.9” so I’m not terribly concerned. I aim for under 1” for hunting loads.


    Sent from my iPhone using Tapatalk

  6. #6
    SAWMAN's Avatar
    Title
    Premium Member
    Join Date
    Sep 2018
    Location
    Cantonment,Fla.
    Posts
    580
    Were those 9 or 10 twist guns ??
    Your choice of bullet will be the most accurate. Nothing wrong with the BalTip . . . especially at the longer ng ranges where the bullet has a chance to slow down a bit.
    The older Leupolds were the VARI-X ones. I still have several. I was never a fan of the non-click scope adjustments . . HOWEVER . . once you get them set,they stay right there. My wife has been using a VARI-X one,3.5-10X50 on her 30-30 AI now for the last 20 years. Still a great scope.
    If you bbl is not floated, if it gets hot it will most likely string 5 shots vertically. These bbls are quite easy to float. If problems persist you might want to give that a try. --- SAWMAN
    Why just dance when you can "rock and roll".
    STONER 63A ( MK-23/XM-207 )
    XM177E2

  7. #7
    Flyeralan's Avatar
    Title
    Premium Member
    Join Date
    Jul 2018
    Location
    SE PA
    Posts
    404
    Many years of hunting with a model 70 in 243. First whitetail and then PA groundhogs. Always had great success with IMR 4350 with everything from 60 to 100 grain projectiles, did bed the action and float the barrel but other than that it was stock. The single thing that made the most advance in accuracy for me was the OAL. That thing shot great with 10-15 thou jump and anything else opened up the groups big time. Sadly, the throat is gone in that model 70 and it sits in my safe and I'm not sure what will happen to it.
    "Long range shooting, It's like golf, but for men"

  8. #8
    SAWMAN's Avatar
    Title
    Premium Member
    Join Date
    Sep 2018
    Location
    Cantonment,Fla.
    Posts
    580
    Sounds like it is time for a re- barrel. Anything with a 243Win bolt face.
    There are quite a few choices. --- SAWMAN
    Why just dance when you can "rock and roll".
    STONER 63A ( MK-23/XM-207 )
    XM177E2

  9. #9
    Flyeralan's Avatar
    Title
    Premium Member
    Join Date
    Jul 2018
    Location
    SE PA
    Posts
    404
    Quote Originally Posted by SAWMAN View Post
    Sounds like it is time for a re- barrel. Anything with a 243Win bolt face.
    There are quite a few choices. --- SAWMAN
    Yep, already had a discussion with my smith about it, just have too many other projects going on right now.
    "Long range shooting, It's like golf, but for men"

  10. #10

    Title
    Premium Member
    Join Date
    Sep 2018
    Location
    Florida
    Posts
    13
    Real nice rifle you have. You may need to check headspace. Those model 70s don't tend to wear out of they are cared for unless you shoot tons of high speed (top + load charges) rounds.

    It isn't a simple fix, but as Sawman said, it could be due for a rebarrel. Good thing is, Winchester still makes them.

    Sent from my Pixel 3 XL using Tapatalk

Similar Threads

  1. 270 Winchester
    By Mike.Twite in forum Reloading for Hunting
    Replies: 10
    Last Post: 09-17-2019, 02:26 PM
  2. S&W Model 52
    By MAGGUNS44 in forum Pistol Reloading (General)
    Replies: 2
    Last Post: 06-10-2019, 10:09 PM
  3. Remington Scoremaster Model 511 date codes.
    By CodySPowell in forum General Firearms Discussion
    Replies: 5
    Last Post: 12-14-2018, 11:32 PM
  4. Model 12 shotgun sling thoughts
    By CKTROTH in forum General Firearms Discussion
    Replies: 1
    Last Post: 10-01-2018, 01:19 AM
  5. 284 Winchester
    By Justin in forum Wildcat reloading
    Replies: 0
    Last Post: 09-20-2018, 05:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •