Press Mounting Options

I'm setting up a Harbor Freight bench for reloading and still want to have the bench open for other uses. i see some folks use T-track and also see the Inline Fabrication flush mount system. these are the two methods I'm considering. I'm looking for experiences with either of these two. It appears I'll need to use a router for either one and I've never used a router so that's going to be a learning experience as well. The presses I'm going to use are a Lee Classic Turret and a RCBS single stage. I figure a good quick mount setup will allow for future additions as well. I've added a picture of what I have currently and what I'm working with now. I welcome all of your thoughts and opinions on this little project.

This is my permanent setup:
Attachment 385

And this is my mobile "mancave" project:
Attachment 386

On my bench I drilled holes through the top and installed t nuts on the bottom. Now when I want to use my strong mount I just use 4 bolts through the mount and it is done. When finished off they come and I have my bench back.

https://www.homedepot.com/p/The-Hill...FcPEwAodjoMFWg

Sent from my Nexus 7 using Tapatalk

I have forgotten about t nuts. Thanks. That's another option for me.


Sent from my SAMSUNG-SM-G870A using Tapatalk

I've copied this from a friend of mine: picture a female receiver hitch in the face of your bench and your press is the ball on the male part of receiver hitch. Instead of a pin (would allow slack) we used set bolts that hold well hand tight or can be wrenched very tight. You will definitely need a welder and some materials for this project. I like the presses mounted like this because you can sit comfortably and easily reach any area of your press. Plus, it's easy to store the presses out of the way if you need the bench or swap presses in or out. https://uploads.tapatalk-cdn.com/201...bbfb182215.jpgAttachment 384https://uploads.tapatalk-cdn.com/201...053f125328.jpghttps://uploads.tapatalk-cdn.com/201...f68ccfabdf.jpg


Sent from my iPhone using Tapatalk

https://uploads.tapatalk-cdn.com/201...024b9734a3.jpghttps://uploads.tapatalk-cdn.com/201...26a5d2aae5.jpghttps://uploads.tapatalk-cdn.com/201...25d56d0eef.jpghttps://uploads.tapatalk-cdn.com/201...99d3ae5940.jpg


Sent from my iPhone using Tapatalk

Very nice

Now that's a solid looking mount. this is an idea I'll keep handy :o

I've got a Workmate Work bench. I mounted my RCBS to a 2x12 then use clamps the mount to the work bench. Can remove press at anytime and set aside. Works great. Also have my 2 Dillon 600's and my LML trimmer mounted the same way.

I used 1-1/2" and 2" tubing, (what i had on hand) and did the same as cowcatcher up there, ive got a dillon swager, 2 pacific 155's, and a dillon sl900 on my quick mounts. They are very sturdy, easy to adjust, and easy to build/install.

Sent from my WIENER using Tapatalk.

Attachment 394Attachment 395

If you do go with the t track, don’t be too scared to use a router. It’s a very quick learning process. Make it easy on yourself by using a straight track against the router to guide you so you get a perfectly straight channel for the track. Just set your plunge depth and take it slow at first. You’ll be proud of having learned to use a new tool and you’ll be satisfied with the result. I’m about to install some track on my own bench for mounting several tools(bench vise, bench grinder, powder measure, etc).

Damn, why is everyone so much more organized than me! :( My reloading area looks like a tornado hit!

I've settled on using t-track for my bench. I also know my OCD will kick in when I install the track. Yesterday I spent a few hours getting acquainted with the router and some scrap wood. I'm feeling good about this.

Quote:

---

Originally Posted by Ledslnger

Damn, why is everyone so much more organized than me! :( My reloading area looks like a tornado hit!

---

An organized desk/bench is a sign of a sick mind. You are good!

Man that is a nice set up Cowcatcher.

Quote:

---

Originally Posted by ReneeMicelli

Man that is a nice set up Cowcatcher.

---

Thanks! I added my homemade bullet tray/bowl.
https://uploads.tapatalk-cdn.com/201...9ed28a585f.jpg


Sent from my iPhone using Tapatalk

Here's mine.

Attachment 470Attachment 471

That's solid looking. It looks like the track is the standard 3/8" deep. Is the base two pieces of three-quarters? I'm thinking a single piece of three-quarters would suffice.

Quote:

---

Originally Posted by Steve Lonie

That's solid looking. It looks like the track is the standard 3/8" deep. Is the base two pieces of three-quarters? I'm thinking a single piece of three-quarters would suffice.

---

The track is Rockler T track. The base is two pieces of 3/4 plywood glued together that I had leftover from another project. I used a flat 2X12 cut square for the base for my vice. the 2x12 works just as good as the plywood and was easier since I didn't have to glue two pieces of plywood together. You can see the base for the vice on the shelf below the table behind the plastic containers on the right.

Duplicate post deleted.

The Rockler T track is what I'm going to use. That takes 1/4" and 5/16" bolts? I haven't any plans for storing the press/wood bases yet. I'm putting the plan together now so when I get to Florida I can get right to it.