Winchester small rifle primers

I usually use CCI small rifle primers. My local dealer is out, any problems with Winchester small rifle primers?

I haven’t had an issue I use cci400&450 and win small rifle


Sent from my iPhone using Tapatalk

I’ve used them with no problems at all.


Sent from my iPhone using Tapatalk

No problems here


Sent from my iPhone using Tapatalk

You might find you like them better...

Never had a problem with Winchester in .223 or x39.

No problems with Winchester primers.

Good reliable primers...but I prefer CCI and federal.

Some say cups are on the softer side for AR15 Semi ... but I never had problem with mine. I did however switched to Rem 7 1/2 when they were on sale.

Have no.41 for my AR, just need more for my bolt gun

Winchester are good primers. I've used CCI for about 51 years. I'm slowly switching to Win & Fed. As for thick cups. The cups are thicker on mag primers.

Thousands used with no problems.

No problems in my AR.

This is pistol not rifle but it may be the same in those as well. I bought some Winchester small pistol and discovered they don't feed as well in the Lee hand or bench primer units that use the triangular feed trays. I have always used CCI until I ran into a special on Winchesters. I checked on here and comments indicated no differences. However the Winchester primers don't slide down the throat without constantly tapping the tray. I have also had several go into the primer hole sideways. Problems I never had with CCI. I have tried two Lee trays and the issue is the same.
Anyone else experience this problem?

Sent from my SM-G930V using Tapatalk

I've always used winchester primers for everything. Never had any problems at all.