Printable View
Recently acquired a Winchester Model 70 in 270WSM and need to develop a hunting load. I understand this caliber is destructive on deer sized game so bullet selection would be key. Range would be 50 to 300 yards. Anyone have a favorite bullet for this gun?
Then you probably will have to make the choice between destructive and trajectory.
Meaning . . . you can slow it down . . but then you would loose the excellent trajectory that this chambering has,at 300yds. You can turn it into a 270Win or even a 6.8SPC with velocity.
You possibly could be less destructive using one of the solid copper offerings. Barnes offers from 85gr ( I use these in my 6.8) on up.
Do not use the Hornady 120gr SST. They shed their jacket even at the 6.8 vels. The Hornady GMX line might be another option. They are a guilding material and a little harder than the solid copper bullets.
The .277" bullets are designed for use in the 270Win. Anything much slower (my 6.8SPC) or anything faster (270WSM) will need some expiermentation.
For your usage possibly a solid copper bullet of between 120 and 140grs. Remembering . . . these are much longer.
Let us know what you find out. I have a friend that has been trying to sell me a heavy bbl Browning chambered in 270WSM. I would like to turn it into my longer range coyote gun using a lightweight bullet at high velocity. --- SAWMAN
Thanks for the reply. I was thinking along those lines. I'm new to this caliber think I will start with lowering the velocity first.
.
I only run Nosler 140 accubonds with a heavy dose of H-1000 I load them for my buddies deer rifles also that combo kills them dead every time
Sent from my iPhone using Tapatalk
Been looking at those. I need a bullet that won't explode on impact at close range. The H-1000 is on my list. What primer do you use with that combo?Quote:
Originally Posted by Pyrochad
I started with Nosler BT’s and they would explode on every range I tried them that’s why I went to the accubond and haven’t looked back since, I have shot deer from 80 yds all the way to almost 400 and the performance is exactly the same bang flop.Quote:
Originally Posted by gbrew40
My blah blah is over now, I use federal 215’s, and your going to want to be closer to the top end of the load data, those bullets love speed. I have also found that Winchester brass seems to be less accurate, Norma brass seems to be the most accurate I know it’s expensive but it also has good brass life.
Hopefully I have helped you out
Sent from my iPhone using Tapatalk
You have. I'm not ready to start wowrking on them just yet but in the process of gathering components. I will try those Accubonds.Quote:
Originally Posted by Pyrochad
Update:
I have started with 130 grain Accubonds and RL22 with promissing results. 63 grains produced .53 group at 100 yards 3301 FPS. Max load of 65 grains produced .86 group/3396 FPS. I have not yet chrono graphed either load but will next firing. I could not get the H1000 at any of my usual supply houses and almost didn't get any Accubonds all being out of stock.I also have the 140 grain Accubonds to load.
I can now attest to those Accubonds with two whitetails down. Fell in their tracks.
Thanks for the update!!!
JTD
The Accubond is my "go to" bullet for hunting. Shoots like a match bullet, good expansion, yet weight retention is excellent even in large, tough animals like elk. Can't give any results in hogs since there's none up where I live, but I've used them on whitetail, big mule deer, antelope and elk with perfect performance. I've got a friend with a .270 who is looking to work up some good hunting loads and I'm going recommend that he start with the 130/140 Accubond as well.
You will do well with those Accubonds. I loaded the 130's .277 for my 270WSM and so far two bucks. One at 30 yards and the other at 150 yards. Same result. Bang, Down. Since both went to a local deer processor I don't have the bullets recovered but both look to have went through both animals. Accubonds are my hunting bullet of choice now. Got the 140's to load next.