With these 50 grain zombie bullets, do you guys like the H335?
Sent from my iPhone using Tapatalk
Printable View
With these 50 grain zombie bullets, do you guys like the H335?
Sent from my iPhone using Tapatalk
Yes. 25.0gr works for me.Quote:
Originally Posted by BHeuer
Sent from my SM-N910V using Tapatalk
Sweet, I have heard good reviews with this powder.
Sent from my iPhone using Tapatalk
TAC, H335 and Benchmark are good for the 50s in bolt guns. Best results in my AR was with Varget.
Sent from my LM-V405 using Tapatalk
I use H335 quite a bit it's a good powder.Quote:
Originally Posted by BHeuer
Sent from my SM-N910V using Tapatalk
I use varget, gave me the best grouping.
Sent from my Moto Z (2) using Tapatalk
What barrel length and twist? How many grains?Quote:
Originally Posted by Travis Warren
Sent from my SM-N910V using Tapatalk
AR platform, 16 inch barrel, 1/7 twist
Sent from my iPhone using Tapatalk
1 load is a pet load for two rifles.Quote:
Originally Posted by Guns4545
50gr Z/V-Max
13.5gr Varget
2.200" C.O.A.L
CCI #400
24" 1:8" .223 Wylde AR Platform
Mossberg MVP 16" 1:9" 5.56
Sent from my Moto Z (2) using Tapatalk
That's all I use for the 50gr Zmax. I really like H335 for .223. Probably should try some other powders but the H335 has worked perfectly.Quote:
Originally Posted by BHeuer
Sent from my SM-J727V using Tapatalk
If it ain't broke! I like H335. Meters great on a Dillon.Quote:
Originally Posted by CodySPowell
Sent from my Moto Z (2) using Tapatalk
Thanks bud. I have varget as well. May load some up and try it out.Quote:
Originally Posted by Travis Warren
Sent from my SM-N910V using Tapatalk
You gave me the tips on H335 Cody. Appreciate it bud.[emoji106]Quote:
Originally Posted by CodySPowell
Sent from my SM-N910V using Tapatalk
My pleasure! I'm just happy I can help. [emoji16]Quote:
Originally Posted by Guns4545
Sent from my SM-J727V using Tapatalk
Yessir gour 2500 cause they are seasonal. But here's my h335 and going to be testing ar comp and varget. I want sighted in good yet for the z max. https://uploads.tapatalk-cdn.com/201...d665e798f0.jpghttps://uploads.tapatalk-cdn.com/201...2493d92439.jpg
Sent from my SM-G965U1 using Tapatalk
25.6 has been the sweet spot for me as well.Quote:
Originally Posted by Shane P
Sent from my SM-J727V using Tapatalk
That's awesome, I'm about to test varget and ar compQuote:
Originally Posted by CodySPowell
Sent from my SM-G965U1 using Tapatalk
Thought 25.0gr was Cody?Quote:
Originally Posted by CodySPowell
Sent from my SM-N910V using Tapatalk
That's what my factory barrel liked. I put a BCA .223 Wylde barrel on, likes a warmer round.Quote:
Originally Posted by Guns4545
Sent from my SM-J727V using Tapatalk
What's the twist on the wylde barrel?Quote:
Originally Posted by CodySPowell
Sent from my SM-N910V using Tapatalk
1/9, 16inQuote:
Originally Posted by Guns4545
Sent from my SM-J727V using Tapatalk
There is my 25.0 and 25.2 which was probably better than I printed. I wasn't sighted in for that particular bullet yet. But those were pretty good. https://uploads.tapatalk-cdn.com/201...5598b3f8fe.jpghttps://uploads.tapatalk-cdn.com/201...8737577379.jpgQuote:
Originally Posted by Guns4545
Sent from my SM-G965U1 using Tapatalk
Cool thanks. My 16" 223 wylde BA Hanson barrel 1:8 twist shoots 25.0gr H335 2.250 decent, but am going to try a bit warmer to see if I can improve a little bit.Quote:
Originally Posted by CodySPowell
Sent from my SM-N910V using Tapatalk
Not bad at all! A little fine tuning and you'll be there!Quote:
Originally Posted by Shane P
Sent from my SM-J727V using Tapatalk
No problemo! The Zmax seem to enjoy being pushed a bit. The 25.6 is for LC brass which is what I use for Zmax.Quote:
Originally Posted by Guns4545
Sent from my SM-J727V using Tapatalk
Yessir in using prepped brass from wes. Thinking about sending him my brass to prep lol. I'm getting lazy. What ya charge me wes per thousand or two.Quote:
Originally Posted by CodySPowell
Sent from my SM-G965U1 using Tapatalk
If you want to process bulk .223 get a Giraud triway trimmer. I can do 1,000 in a couple of hours. [emoji16]Quote:
Originally Posted by Shane P
Sent from my SM-J727V using Tapatalk
I have Wes process my brass. Easier on me. Ready to load. I will at some point get a Giraud trimmer though. [emoji6]Quote:
Originally Posted by CodySPowell
Sent from my SM-N910V using Tapatalk
[emoji106]Quote:
Originally Posted by Guns4545
Sent from my SM-J727V using Tapatalk
I have a rcbs trim mate station, that I can turn them out quick..223 is just small and hate prepping lolQuote:
Originally Posted by CodySPowell
Sent from my SM-G965U1 using Tapatalk
I actually like it, part of the whole reloading therapy process. [emoji4]Quote:
Originally Posted by Shane P
Sent from my SM-J727V using Tapatalk
PLEASE explain your load of 13.5 grs of Varget with a 50 gr Zombie bullet?
The Hodgdon's manual states 26.5 grs as a starting load???
27.5 grs as Max. load.
Obviously a typo...
Sent from my SM-J727V using Tapatalk
Any idea what velocities you're getting?Quote:
Originally Posted by CodySPowell
I didn't have a chance to run them over the chronograph. Kept having issues with it so I left the damn thing at home...
Sent from my SM-J727V using Tapatalk
I'm curious of your results when you get that far. Have a load with TAC running around 3200fps. TAC has lately become a rarity in my area, so I'm testing with Benchmark currently.Quote:
Originally Posted by CodySPowell
I've noticed TAC's getting more rare here as well. Why do you think that's happening?Quote:
Originally Posted by Sgt Greybeard
Not really sure for my area. Only had one dealer that's half hour away stocking it to begin with. Managed to snag an 8# jug from powder valley's free hazmat sale Monday.Quote:
Originally Posted by Tavernia
I just get online. My lgs doesn't stock it unfortunately.
Sent from my SM-N910V using Tapatalk