Will the standard RCBS carbide sizer die remove the Glock bulge that I hear about?
Sent from my iPhone using Tapatalk
Printable View
Will the standard RCBS carbide sizer die remove the Glock bulge that I hear about?
Sent from my iPhone using Tapatalk
The only die I know of is the Redding G-RX set. But it's only made for 40 S&W and is needed in addition to a normal sizing die. Anything else wont go all the way to the base.
Sent from my SM-G950U using Tapatalk
The buldge weakens the case. Don't risk it. Toss them and upgrade your barrel imo.Quote:
Originally Posted by Devilbird
Sent from my SM-N910V using Tapatalk
I don’t own a glock. I was just curious because I ordered a bunch of once fired brass. I was just wanting to know if the RCBS sizer die would eliminate the bulge in any cases if the were once fired from a glock.Quote:
Originally Posted by Guns4545
Sent from my iPhone using Tapatalk
From what I've seen the buldge brass is getting rare. You will still see them, but they are not as bad. That being said just toss them to be safe. You don't want a kaboom. Good luck and be safe.Sent from my SM-N910V using TapatalkQuote:
Originally Posted by Devilbird
Ok. Thanks for the info!Quote:
Originally Posted by Guns4545
Sent from my iPhone using Tapatalk
There is a good reason why that brass looks like that. It is one of many reasons that I own,carry,and shoot Glocks,almost exclusively.
It will reload without a problem. --- SAWMAN
Anytime.Sent from my SM-N910V using TapatalkQuote:
Originally Posted by Devilbird
BUT . . . the Wolf or Glockmeister bbls will take care of the bulge if you prefer not to have it.
The mentioned bbls WILL make your brass last longer also. ---- SAWMAN
The carbide G-RX die is worth it's weight in gold if you are loading .40 or 10mm for a match barrel. Otherwise you might look at the Lee die that has a few thousandths ground off the base.
I shoot a Glock .40, .45, .380 and now the 9mm G43 and have never had a buldge of any kind.
Reload your brass fired from a Glock in 40 , then try to shoot it out of a good barrel. You will see the bulge then. I walked away from shooting a 40 in competition just because all the brass I got had been fired from a GlockQuote:
Originally Posted by rumaco
I use the same brass reloaded in a KKM barrel and also out of my Kimber custom and never a problem of any kind...................
If you're looking to get rid of the bulge take a look at the Lee Bulge Buster Base Sizing kit. I have one and it works great.
https://www.midwayusa.com/product/88...s-and-w-45-acp
Well Captain, I bow to you! Just yesterday I went with a friend and he used some of my (Glock fired 9mm) ammo and it FTE in a Kimber every other round. After using a U die the problem was solved. I guess I was wrong and you were right.....we all learn something new no matter how long we have done this......Thanks for the advise, it worked! Sometimes we are not quite as smart as we think.
No good way/safe way to remove that bulge, decap and resize, use a case gauge! Been through this whole thing myself! If the case won't fit in the gauge, it won't feed into the chamber!