Redding T 7

Printable View

10-05-2018, 05:10 PM
LeeLee86

Redding T 7

So i started out reloading with just a lee single stage press and like everyone else i am sure just ended up trying out a few different presses over the years. I find that i use my RCBS rock chucker more than i do anything else really but i still keep the Hornady LNL AP mainly for my .223 plinking rounds and that is about it. With all that being said i was wondering how the Redding T 7 press was working for everyone else. I like the fact that you can keep 2 different calibers set up on it with having to change anything up. How accurate does it stay when you change the head completely out on it? I am thinking about getting rid of my Hornady LNL AP and picking up the Redding. Any input would be greatly appreciated.
10-31-2018, 01:47 PM
Gordo1473

I just ordered one. I’m looking forward to it. It is my first press
10-31-2018, 01:48 PM
Wes Sage

good presses for sure!!
10-31-2018, 05:49 PM
Baldwin

I have been reloading on a T7 for about 2 years (my first press). I load 9mm and .45ACP. I thought about trying to have dies for two calibers on one turret, but decided to buy another turret. The dies stay accurate, but I also powder charge on the press using
a Hornady LNL powder measure. Obviously, it has to be adjusted when changing from one caliber to another. It has Redding's primer feed system and I have an extra primer slide bar so I can have one for both small and large primers. The press
runs very well. It is built like a tank. I actually want to sell this whole set up. I'm about to retire and anticipate shooting a lot more so I would like to get a progressive press.
10-31-2018, 05:54 PM
LeeLee86

Very interesting. Message me Baldwin.

Sent from my iPhone using Tapatalk
10-31-2018, 06:22 PM
Baldwin

Quote:

Originally Posted by LeeLee86

Very interesting. Message me Baldwin.

Sent from my iPhone using Tapatalk

I can't figure out how to send a message. I joined the forum about an hour ago so I may not have that privilege.

My email is wfred5377@gmail.com
10-31-2018, 08:25 PM
LeeLee86

I sent you a PM.

Sent from my iPhone using Tapatalk
11-01-2018, 03:26 AM
Solomon.trenton

The reviews online say there needs to be more holes for the turret handle. Is that the case? Also, how easy is the turret change from head to head?

Sent from my SM-G930V using Tapatalk
11-01-2018, 03:51 AM
Baldwin

Quote:

Originally Posted by Solomon.trenton

The reviews online say there needs to be more holes for the turret handle. Is that the case? Also, how easy is the turret change from head to head?

Sent from my SM-G930V using Tapatalk

I reload in 4 steps on my T7. When sizing/priming (first step), the turret handle is at 7 o'clock (close to me). At the last step (seat/crimp), the handle is at 12 o'clock. It would
be better with more holes, but it's easy to get used to it the way it is. When putting dies in the turret, you need to consider where the holes are located. Changing turrets is easy. There
is a large, fine threaded, allen head bolt in the center of the turret head that holds it on. There is a spring loaded steel ball that sits in a hole in the back of the press frame.
This ball catches the detent holes in the bottom of the turret head to insure the turret is centered where it needs to be when rotated. You need to use care when removing the turret head
because this spring loaded ball (ball bearing?) tends to pop out and you don't want to lose it.
11-01-2018, 05:27 AM
Solomon.trenton

Thank you for the input. I currently do all my reloading on a single stage partner press. Had my heart set on the lyman t mag but they discontinued it and it isnt available. This one looks like a great option.

Sent from my SM-G930V using Tapatalk
11-01-2018, 06:46 AM
LeeLee86

Quote:

Originally Posted by Solomon.trenton

Thank you for the input. I currently do all my reloading on a single stage partner press. Had my heart set on the lyman t mag but they discontinued it and it isnt available. This one looks like a great option.

Sent from my SM-G930V using Tapatalk

Look at the Lyman brass smith all American. It is an 8 station and are about $100 cheaper than the T-7. Just another option for you.

Sent from my iPhone using Tapatalk
11-01-2018, 07:21 AM
Solomon.trenton

Quote:

Originally Posted by LeeLee86

Look at the Lyman brass smith all American. It is an 8 station and are about $100 cheaper than the T-7. Just another option for you.

Sent from my iPhone using Tapatalk

From what i have read it isnt as rugged as the t mag. Id rather spend a little more for a much better setup.

Sent from my SM-G930V using Tapatalk
11-01-2018, 08:58 AM
Baldwin

Quote:

Originally Posted by Solomon.trenton

Thank you for the input. I currently do all my reloading on a single stage partner press. Had my heart set on the lyman t mag but they discontinued it and it isnt available. This one looks like a great option.

Sent from my SM-G930V using Tapatalk

I don't think it has been available long, but this might be another option:

https://www.midwayusa.com/product/75...n-turret-press
11-01-2018, 09:09 AM
Baldwin

Quote:

Originally Posted by Baldwin

I don't think it has been available long, but this might be another option:

https://www.midwayusa.com/product/75...n-turret-press

Disregard - I didn't see LeeLee86's reply above. Sorry.
11-13-2018, 06:10 AM
Professor

Quote:

Originally Posted by Solomon.trenton

Thank you for the input. I currently do all my reloading on a single stage partner press. Had my heart set on the lyman t mag but they discontinued it and it isnt available. This one looks like a great option.

Sent from my SM-G930V using Tapatalk

I used a Lyman T-Mag for about 20 years. It is a good press, but the T-7 is hands down better. While I had two heads on the T-Mag, I only have one on the T-7.

Using RCBS lock rings on your dies, allows you to fix the ring to the die with the set screw. Then you can pull them out as needed.

The T-7 will never be as solid as a Rock Chucker, but it is very nice for what you seem to be looking for.
11-16-2018, 03:57 PM
Shootingblanks

The Redding T-7 was my first press before getting a Dillon 650, Lee Classic Single Stage Press and another Dillon 650.

One 650 is set up for small primer, mostly load 9mm, 556 and 300BlkOut on that set up.

Other 650 is set up for large primer, mostly load 45ACP and 308.

I still use the Redding T-7 for precision rifle rounds, 556, 308 and 30-06. It is a great press and Redding's quality and customer service is top notch. I have their competition match dies sets for 223 and 308, well worth their money. Inline Fabrication mount works great with this press and I have some of their other aftermarket parts for it.
11-18-2018, 10:56 AM
Jon Klug

The T7 was my first press. When I got into reloading, 13 years ago, I picked the T7 "just cuz" it was on the shelf and liked to turret option over the single stage. I also believe in "buy once, cry once". Years later, I learned the quality of Redding. I have 4 heads as well.

FWIW, Redding recommends 45 to 50 ft/lbs of torque if/when you swap heads.

I have no regrets going with the T7, and second the Inline Fab add ons.
11-20-2018, 05:12 PM
Guy

Handlloader Magazine just had an article about a Redding T-7 owned by Sierra Bullets, that had loaded 1.6 MILLION rounds with no measurable wear.

I've got a Lyman turret press that I like very much, but am pretty sure the Redding is even better, just from what a few buddies have told me, AND that incredible 1.6 million figure...

Regards, Guy