Printable View
I currently have an rcbs partner press and am looking to upgrade to a more hd single stage as I am going to be getting a 300wm in the near future. Trying to decide which SS to get for loading precision rounds. Looking at the Rock Chucker supreme or the Forster CoAx. Any help, suggestions or experiences would be great.
I have the Rock Chucker Supreme. I have loaded 7mm Rem Mag with no issues. A friend used it to size 300 Win Mag and 30-378 with no issue. My brother has used it for 340 Weatherby and 350 Rem.
Load as much as possible and shoot as much as possible.
Either one of those would be great for what you are looking to do.
Sent from my iPhone using Tapatalk
If I were going to replace the RCBS Partner, I would replace with a Turret. Still have the single stage process BUT with the rotating head you can install ALL dies and powder measure. By simply rotating the head you have a completely loaded round. And if you load for more than 1 caliber purchase a head for each caliber. By simply removing and installing you are ready to start loading again. No removing & installing dies for each process.Quote:
Originally Posted by Ghostwolf308
I currently have a Lee classic turret press as well. Just looking to upgrade my single stage
I’ve read great reviews on the MEC single stage press as well.
Sent from my iPhone using Tapatalk
So i found rhis great article that compare the Rock Chucker and the Co-AX. My question is in the conclusion it states if your going to be doing alot of heavy duty sizing the Rock Chuck is the best option. At what claiber does it become heavy duty sizing? Is 300wm considered hd sizing? I know he uses 7X57 for the tests. Thoughts?
http://www.targetshooter.co.uk/?p=1750
I have a rcbs summit that I have been using for all of my bigger stuff. 338 lapua 338 um 30-378 wby 338-378 wby I have ran stuff all the to 6mm br in it. I would recommend getting the short and long handles for it. Take a looks at it
Sent from my iPhone using Tapatalk
The RCBS Rock chucker supreme is the one that I use and a load those for everything. You cannot go wrong there.
Sent from my iPhone using Tapatalk
I've always been partial to the Rockchucker for a single stage press. I also have a Partner, it's nice for lighter duty stuff like seating.
Bob
So far the consensus seems to be rock chucker. Surprised no one has chimed in on the coax. You guys getting good run out and accurate loads from the RC??
Rock Chucker for me(X2). I pull the pins and clean and relube every 5 years or so.
Used it last night . . . been using them since 1979.
No progressives or tool heads for me. Reloading is my "hobby". I go slow and easy to turn out a good product. It is like building a model airplane. A quiet hobby. --- SAWMAN
I get great results from it, I’ve had mine for several years. I loaded up all of my ammunition for hog hunting, and target shooting. Very simple yet very solid and sturdy.Quote:
Originally Posted by Ghostwolf308
Sent from my iPhone using Tapatalk
You guys using the hornady bushing kit?? Looks like a good way to get quick change dies.