What are your favorite bullet/powder combinations for 9mm subsonic loads? Anything that shoots particularly well and reliably from a suppressor?
Printable View
What are your favorite bullet/powder combinations for 9mm subsonic loads? Anything that shoots particularly well and reliably from a suppressor?
Xtreme 147gr bullets with Accurate Arms #2 or Titegroup have worked awesome for everyone here in our WA group of suppressor shooters.
Xtreme 147s from Wes with 3.6 or 3.7 grains of HP38. I run them in a G19, 1911, and AR9.
I use the 147 gr Extremes from Wes and 4 grains of Power Pistol. Works well for me in everything so far.
Quote:
Originally Posted by Wes Sage
What Wes said. I have also played with 124gr and titegroup
I'm following Wes' recommendation for Accurate AA#2. I'm using 3.4gr with Xtreme 124 FP from Sages. It's a very soft but reliably feeding load in two PM9s and places groups under 1" at 7yds. I like the 124gr better than 115 or 147. I also used Titegroup but I felt it was louder, snappier and dirtier than AA2.
I am not suppressed thanks to Cuomo.
165gr rainiers 3.6grns power pistol.
3.4 gr titegroup 147gr xtreme hp.
Sent from my Glade Fresh! Plugin using Tapatalk
3.1 gr. bulleye and 147 SnS cast/coated. I shoot these out of my PSA 9mm PCC and Glock 34 g5. I use an Octane 45 on the PCC, very quiet! Also use them on my XDM 9mm w/ threaded barrel.
147 grain blue bullets with 3.4 grains of titegroup. Cost per round is great
Sent from my iPhone using Tapatalk
Im getting stove pipes and FTF problems with 147gr xtreme's over 3.4gr of Tight Group in my G19 with a TiRant. Yall think I should bump powder up to 3.6 or switch powders? Anyone else had that problem?
Should be fine. Maybe try a little more crimp, or seat just a tad deeper.
If that doesn't work, and you have no pressure signs, bump the powder up a bit
10-4. Thanks Ill try it out and let you know.Quote:
Originally Posted by Wes Sage
If all goes well, I should be seeing a suppressor in a couple months. I should work up a good 147gr subsonic 9mm load before it comes in so I have a good baseline un-suppressed.
I shoot a lot of suppressed and so far like my load of 4-4.1 gr of Power Pistol. Using Xtreme 147 gr bullets from Wes.
I run 124 grain round nose cast
Thanks for the responses guys. I’ve got 3 cans in jail and really want to get a good load figured out to shoot quietly for when the crown grants me permission. I’ve got the 147 xtremes ordered from Wes. Sounds like 3.4gr titegroup is where I’ll start since I have a bottle of that on hand.