Thanks but my greatest fear was having the router guide move while I was working. I couldn't get over it so I chickened out and drilled the holes.
Printable View
Thanks but my greatest fear was having the router guide move while I was working. I couldn't get over it so I chickened out and drilled the holes.
I started reloading couple years ago. It's a work in progress. I can load .30-30 and .45ACP (large primers) on the 550 and .45ACP (small primers) and .38/.357 mag. on the Square Deal B.
Work in progress,about the time I get it together it will be time to set up in a new house,but will have a seperate room for firearms and reloading gear.
Attachment 1198Attachment 1199
It's coming along. Now I just have to fill those shelves with bullets, powder and primers. Oh and a few more dies and an annealing setup and...
Attachment 1251
It sure is looking good, and I bet it gets filled up a lot faster than you think.
Nice. That bench top looks like it's seen a lot of projects. I love a working bench.Quote:
Originally Posted by Bentstick
Thanks, and I'm sure you're right. If it gets to crowded I'll move the bullets, powder and books to a different spot and just save the bench for tools and equipment. I thought it looked a little sparse after I posted the pic so I ordered more stuff right after, haha!Quote:
Originally Posted by Big Eddy
yes kcb it has I have had that bench for about 20 yrs now,come off a job we did a remodel onQuote:
Originally Posted by kcb38
Yor bench lookin good and yes they fill fast/very fast
Here’s my little slice of heaven. One side for loading and one side for general gun work.
Attachment 1267Attachment 1268
[IMG]file:///C:/Users/russc/OneDrive/Pictures/2019-05-08/20190508_152212.jpg[/IMG]
NiceQuote:
Originally Posted by Loadr
Sent from my SM-G965U using Tapatalk
^^^ From Australia? :biggrin:
Just finished building my die and book shelf. Now I need to fill it up.https://uploads.tapatalk-cdn.com/201...90df7e6685.jpghttps://uploads.tapatalk-cdn.com/201...eb77719094.jpghttps://uploads.tapatalk-cdn.com/201...95be10eeae.jpg
Sent from my SM-N950U using Tapatalk
It’s a modest start...
Carved out a 5’ wall section in the storage room so I could build a proper bench/space. Have been mucking around with a D550 mounted to a butcher block top clamped to a 1980s era workmate with components stored hear n there around my office.
Lighting and electric done.
https://uploads.tapatalk-cdn.com/201...b4cc4d708e.jpg
Also sheathing the under stair 4’ square space and building shelves to consolidate component storage and finished freedom seeds.
https://uploads.tapatalk-cdn.com/201...f85b8be512.jpg
ETA - finished the shelves yesterday. Managed to get 3 in the space available and have the current components all in one place for the first time. These carry a lot of weight so I lagged a 2x4 cleat into the studs and then built a 2x4 frame. The frame has additional cross pieces for strength and then was clad in 3/4” MDF. I may add some 2x4 ‘jacks’ between the shelves so that the load is carried all the way to the floor
https://uploads.tapatalk-cdn.com/201...b40f53bb9a.jpg
Lots of great ideas for workspace layout and organization in this thread. Thx for posting pix.
Sent from my iPhone using Tapatalk
Took this...
https://uploads.tapatalk-cdn.com/201...8e0b6dd834.jpg
And turned it into this....
https://uploads.tapatalk-cdn.com/201...63f952f70a.jpg
Using the inline fabrications quick change plate and will mount my D550 and Yost 445 as needed
Now all I need to do is man handle it into the corner and lag it to the wall
Sent from my iPhone using Tapatalk
I took some new pics
Attachment 1358
Attachment 1359
Attachment 1360
Attachment 1361
Updated my reloading room after our move. I have the largest of the spare bedrooms all to myself.
Tumblers have been moved to a station out on the back screened in porch, so I can work in relative peace inside. https://uploads.tapatalk-cdn.com/201...5707928f86.jpghttps://uploads.tapatalk-cdn.com/201...f081cf1251.jpghttps://uploads.tapatalk-cdn.com/201...fe08990c16.jpg
Very nice! I so wish I had more room to use ...Quote:
Originally Posted by Sgt Greybeard
Sent from my iPad using Tapatalk
Thank you! If you scroll up to post #15 and #96, that was my setup in the apartment. I've been very fortunate in my reloading addiction.Quote:
Originally Posted by Shamr0ck
Top on and sticker finally added and last press mounted https://uploads.tapatalk-cdn.com/201...4f77add8f7.jpghttps://uploads.tapatalk-cdn.com/201...10f6651b5a.jpghttps://uploads.tapatalk-cdn.com/201...f74c46b45d.jpghttps://uploads.tapatalk-cdn.com/201...5f35cb3007.jpg
Sent from my SM-G965U using Tapatalk
That is some serious reloading. Microsoft millionaire?
Not a millionaire. Yet. Lol.Quote:
Originally Posted by 72Camaro
Sent from my SM-G965U using Tapatalk
Just for me, small but effecient tried to add a picture of my loading area but couldn't. Don't know how??
Are you using Tapatalk app or a computer?Quote:
Originally Posted by 74man
JTD