Best .308 load/combo

Hey everyone. Just wanted to see what is your best load for .308. Currently starting to load for .308 and just wanted to know what everyones go to combo is for accuracy.

•brass
•bullet
•powder
•barrel length/twist

Thanks! You're the best!

Depends on the intended target and distance more than anything.
Every rifle shoots differently, but you can get some pretty good starting points with the proper info.
Hunting?
Match Shooting?
Paper punching?
What distances?
what gun?
What Twist rate?

I have favorite loads for most of the applications wes stated. They are similar but not the same. All are for gas guns and warmish for the guns (maybe 4 loads before primer pockets loosen up). All use varget. For absolute accuracy near and far, I've had best results w 178eldm seated fairly short in lapua brass. I don't really see enough difference in lapua vs a well prepped lc brass to justify the cost but there is a difference and it becomes obvious beyond 800. Hunting 178eldx. 175rdf and 175 smk both very good target choices. Wes has the best price I've seen on the 178eldm.

Fyi, 4 rifles, all 1:10, 16 to 20 inches. 3 barrel mfgs krieg, criter, rainier.

600 to 1,000 yards
1:10 twist .20 inch barrel
ruger precesion

I only use Lapua brass for consistency and it was the first brass I bought for it (before I knew of Wes). My gun (26” 1:10 twist Savage 12FV) loves anything 168gr. With varget. I’ve also had great results with the 200gr ELD-X and 178gr ELD-X

Lapua brass that has been slightly neck turned
42grs of varget looks real good even though its light. I may look for a faster node.
168gr SMK
I forgot the primer. I'll have to find my notes.

175g Lapua Scenar, Lapua brass, CCI Br2 primer, 42g H4895, OAL 2.840
27” Lilja barrel in a Rem 700 receiver.

Remington 700 AAC SD 20" HBAR favorite load:

168gr BTHP
Lake City Brass
CCI LR
41.7gr H4895